Brand: Weike Environmental Protection
Model: Complete
Specification: can be customized
Type: Aerator
Processing customization: yes
Service area: 2.9㎡
Ventilation capacity: 1 2 m³ /h
Oxygen supply: 12kg/h
The structural characteristics of the buoy type submersible aerator
1. Floating positioning, easy installation, free arrangement and movement, and will not interrupt the process operation.
2. Compact structure, self-priming function does not require external air source, even without air bubbles.
3. The main engine runs underwater without ground equipment and low noise.
4. It can be directly used in oxidation ponds, rivers, fish ponds and other large areas of water without infrastructure.
5. It has a stirring function when inflating.
The use of buoy type diving aerator
The aerator is suitable for river treatment, lake water treatment, gas blasting tanks of sewage treatment plants, aeration sand settling tanks, oxygenation and mixing of sewage sludge mixtures, biochemical treatment of sewage or oxygenation of breeding tanks.
Matters needing attention in the transportation and use of buoy-type submersible aerators
1. Do not use the aerator cable to lift or suspend the aerator. Handling or hanging aerators can be hooked on the handle or top cover loop with a chain hook.
2. The buoy aerator is still in use or immersed in water, and can continue to be used at a temperature below 0°C.
3. The grease or lubricating oil used in the equipment may leak due to the wear of the seals. At this time, please send the aerator to our maintenance department or commission a maintenance point to replace the sealing ring as soon as possible to avoid burning the motor.
4. Do not move the inflator or pour water into the water without cutting off the power supply, you must ensure safety.
5. After installation, the buoy aerator cannot be immersed in the water for a long time. It is recommended to run for at least 4 hours every half month to check its function and adaptability, or put it in a dry place for later use.
6. The buoy aerator should not be placed outside the sewage inlet. If the submersible sinks due to vibration when it is placed on mud or floating sand, it is recommended to hang or place the inflator on a larger floor.