Welcome Customer !

Membership

Nanjing Victor Environmental Protection Technology Co., Ltd.
Free Member ·1YRS
,
Other

Main Products:

Xwboo>Products

Nanjing Victor Environmental Protection Technology Co., Ltd.Free·1YRS

  • E-mail

    ccvictor@163.com

  • Phone

    +86-25-57656618

  • Address

    No. 192, East Bianzhong Road, Chengqiao Street, Liuhe District, Nanjing

Contact Now

Diving Push Flow Aerator

Model
Nature of the Manufacturer
Other
Product Category
Aerator class
Place of Origin
City, Province
Overview
The submersible propeller aerator is a portable multifunctional oxygenation system. When the impeller of this equipment rotates at high speed, it produces strong axial thrust and radial stirring force, which can crush the inhaled air into fine bubbles and blow them into the bottom, thus realizing the dual functions of aeration, thrust and mixing, which greatly improves Oxygen utilization.
Product Details

Brand: Weike Environmental Protection

Model: Complete

Specification: can be customized

Length: 500(mm)

Diameter: 200(mm)

Service area: 1000㎡

 

 

Introduction of Diving Push Flow Aerator

The submersible propeller aerator is a portable multifunctional oxygenation system. When the impeller of this equipment rotates at high speed, it produces strong axial thrust and radial stirring force, which can crush the inhaled air into fine bubbles and blow them into the bottom, thus realizing the dual functions of aeration, thrust and mixing, which greatly improves Oxygen utilization.

Advantages of submersible push-flow aerator

1. Stable and reliable all-copper motor: the motor bypasses the thermal protection function, the normal service life is more than 10 years, and the high temperature resistance is durable and the winding is accurate.

2. Precision rotor of aerator: stable and reliable power, long life, no noise, suitable for high-speed running stainless steel bearings.

3. Exquisite sealing ring: good oxygen resistance, good aging resistance, abrasion resistance and durability.

4. Jinggonggong bearings: high-end ball bearings run smoothly, with low noise, and long life under high load.

 

 

Purchase skills of submersible push-flow aerator

1. Head: It is the height at which the pump can pump vertically, but when the total height is reached, the flow of the pump is 0. Normally, it is better to use the actual head within 60% of the marked head.

2. Flow rate: When the head is 0, the actual pumping volume is lower than the marked flow rate value. Generally, the actual flow rate is about 60% of the marked flow rate, so buy a large pump rather than a small pump.

3. Rotor: When the flow of your water pump becomes small or does not work, please turn on the water pump first and take out the rotor inside, rinse it with clean water, and then install it back. When disassembling and washing, pay special attention to the ceramic shaft and do not break it.

Similar Product Recommend