Welcome Customer !

Membership

Nanjing Victor Environmental Protection Technology Co., Ltd.
Free Member ·1YRS
,
Other

Main Products:

Xwboo>Products

Nanjing Victor Environmental Protection Technology Co., Ltd.Free·1YRS

  • E-mail

    ccvictor@163.com

  • Phone

    +86-25-57656618

  • Address

    No. 192, East Bianzhong Road, Chengqiao Street, Liuhe District, Nanjing

Contact Now

Hyperboloid Submersible Mixer

Model
Nature of the Manufacturer
Other
Product Category
Mixer class
Place of Origin
City, Province
Overview
Dry installation of the hyperboloid submersible mixer, the driving device is fixed on the working bridge, and the kinetic energy is transmitted to the impeller part in the medium through the transmission shaft. It is used in the liquid with high solid content, high water temperature and abrasiveness. Due to the impeller With automatic correction function, the operation is relatively stable, and the noise of the reducer is less than 60 decibels.
Product Details

1. Introduction to hyperboloid submersible mixer

Dry installation of the hyperboloid submersible mixer, the driving device is fixed on the working bridge, and the kinetic energy is transmitted to the impeller part in the medium through the transmission shaft. It is used in the liquid with high solid content, high water temperature and abrasiveness. Due to the impeller With automatic correction function, the operation is relatively stable, and the noise of the reducer is less than 60 decibels.

2. Advantages of hyperboloid submersible mixer

1. Low energy consumption: the ideal fluid design is used, so the energy consumption is lower.

2. No clogging: Different from the horizontal push-flow agitator, because the push-flow speed is fast, it will not hang any substance on the mixing body.

3. No dead ends: omni-directional push flow, all areas in the pool can be evenly stirred without dead ends.

4. Anti-corrosion resistance: refuse to use materials that are easy to rust. Both the mixer disc and the mixing shaft use high-grade anti-corrosion materials.

5. No sludge sedimentation: Due to the high flow rate of the water in the entire pool, sludge will sediment in the sludge.

6. Convenient maintenance: There are no easy-to-wear parts underwater, and the geared motor can be easily and conveniently accessed for maintenance.

7. Exquisite structure: The whole machine is exquisite and perfect, and continuous improvement ensures the durable quality and delays the service life.

8. Balance movement: When the agitator is working, it can correct its position and ensure that the downward force is vertical, thereby preventing unbalanced movement.

3. Selection basis for hyperboloid submersible mixer

1. The selection is exactly the same. The two are only different in installation methods. They are the same as other types of mixers. The selection of curved mixers is related to the pool type, volume, liquid depth, medium concentration, temperature and The pH and other parameters are related.

2. The effective service area of ​​each equipment is determined, and in accordance with the principle that the ratio of the pool length to the pool width does not exceed twice, the rectangular pool can be divided into several equal working units to determine the number of mixers.

3. When selecting the type, consider increasing the power or increasing the working speed of the mixer to ensure that the mixing effect can be achieved in a large-capacity and high-concentration medium. Under normal working conditions, it is recommended to prefer dry installation, with noise or For visual requirements, submersible installation is recommended.

4. Application range of hyperboloid submersible mixer

Hyperboloid submersible mixers are widely used in environmental protection, chemical, energy, light industry and other industries where liquids need to be exchanged between solids, liquids, and gases. They are especially suitable for coagulation tanks, regulating tanks, anaerobic tanks, and aeration tanks in sewage treatment processes. Gas pool nitrification and denitrification pool and various abrasive, high temperature media mixing and mixing.

5. Precautions for maintenance of hyperboloid submersible mixer

1. The lubricating oil of the reducer needs to be replaced when the submersible mixer starts to operate for 200 to 300 hours, and the internal oil stains should be cleaned. It can be replaced once in six months to one year in the future.

2. Regularly check whether the mixing shaft lock nut and each connecting bolt are loose.

3. Regularly check the vibration of the stirring shaft.

4. Regularly check the rotating parts for abnormal sound and temperature rise.

5. Regularly check for abnormal changes in current.

Similar Product Recommend