Welcome Customer !

Membership

Ningbo Hanyu Machinery Manufacturing Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 混合机

Xwboo>Products
Product Categories

Ningbo Hanyu Machinery Manufacturing Co., Ltd.Free·1YRS

  • E-mail

    sales@hanyu-machinery.com

  • Phone

    +86-574-86666972

  • Address

    No. 788,hengshan west road beilun,ningbo, China

Contact Now

THREE-EFFECT FALLING FILM EVAPORATOR

Model
Nature of the Manufacturer
Other
Product Category
Products
Place of Origin
City, Province
Overview
THREE-EFFECT FALLING FILM EVAPORATOR
Product Details
STRUCTURAL FEATURES 

◎ Multiple functions: Boiler can reclaim materials repetitively with the circulation of first effect, second effect and third effect. Materials can be fed into for concentration continuously or at intervals.
◎ All parts contacting with materials, secondary steam and condensed water are made of high-quality stainless steel, which meets to GMP standard. The appearance is beautiful. The heater and evaporator are provided with heat preservation structure coverd by stainless sheet with its surface mirror-polished or matte-treated.
◎ The heating chamber with ground structure, beautiful exterior and easy to install, operate and repair.  
◎ Water ring pump is used to pump vacuum. The pump is featured by high vacuum degree, low consumption of water and power supply, small space, good working environment and low noise.  
◎ The advanced design not only prevent back flow leading to repeat heating of material, but also avoid burnt material sticking to inner side of pipe.  

◎ Advanced hot pressure pump is used. Its steam pressure (gauge pressure) is 0.8MPa, and the extraction coefficient is 0.98. Therefore, the steam consumption and noise is low.   
◎ Advanced structure insure the vacuum degree of working system is stable.  
◎ Equipped with CIP system, the device can be cleaned completely without disassembly. And it is easy to operate and maintain.
◎ According to customer requirements, automatic control system of discharge concentration, sterilization temperature and level of balancing tank, as well as ice water refrigeration system can be configured.
◎ The concentrator has a special structure. After materials are processed by concentration are thick and even. The materials can be concentrated in sealed status without any bubbles, so material loss and pollution are reduced greatly. Intraday materials will be concentrated in the day ;after concentration, the material will not agglomerate, which is easy from cleaning. Only open the top cover or bottom cover then can clean, which save the labor, one person is enough for cleaning.