Welcome Customer !

Membership

Nantong Fleck Fluid Equipment Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 混合/乳化设备

Xwboo>Products

Nantong Fleck Fluid Equipment Co., Ltd.Free·1YRS

  • E-mail

    flk@ntflk.com

  • Phone

    86-513-833516928332235283632563

  • Address

    No. 5, Youth East Road, Science and Technology Pioneer Park, Qidong City, Jiangsu Province

Contact Now

Cone fox colloid mill

Model
Nature of the Manufacturer
Other
Product Category
Colloid refiner series
Place of Origin
City, Province
Overview
Cone fox colloid mill
Product Details


1

Cone fox colloid mill is a kind of high-tech multi-functional pulverizing grinding equipment. It is mainly used for pulverizing and grinding of less fragile granules. The material with solid granules is firstly pulverized and mixed in the form of spiral suction pulverization. The main structure of the rotating stator is a fox-shaped grinding structure. The gap between the rotating stator is small, the pitch is short, the number of teeth is large, and the shearing rate is high, so that the large and small particles in the fluid are continuously refined under the action of high-speed shearing and grinding. .

Corresponding parameter set not found, please add it in property template of background
ModelProcessing capacity m³/hMotor Power kwRotating speed r/minImport and export size mm
JTM-ZM1510-1545-751400-295080/100
JTM-ZM3020-3090-1601400-2950125/150
JTM-ZM6040-60160-3001400-2950175/200

The main function of the cone-shaped fox colloid mill is to firstly pulverize and mix the material with solid particles in the form of spiral suction pulverization. After the material enters the second coarse crushing zone, the large particles in the fluid enter with the thick toothed knives. In the high-speed pulverization area, under the action of the high-speed centrifugal force of the rotor, the large particles in the fluid are cut out, pulverized and mixed with the teeth of the stator, and then the fluid is pressed into the fox-shaped grinding zone, due to the fox-shaped grinding zone. The gap becomes smaller, the pitch becomes shorter, the number of teeth doubles, and the shear rate increases continuously. The particles in the fluid are refined after high-speed shear pulverization and then enter the fine grinding zone. Since the grinding teeth of the fine grinding zone are continuously increased, The gap is getting narrower and narrower, the line speed is getting longer and longer, and the grinding effect is best when the stator gap is adjusted to a minimum of 0.05 mm.

Accessories: Equipment selection parameters and technical requirements (downloadable)

 First, the technical parameters of your company's materials:
Material medium Processing capacity(m³/h)
Liquid category□Water-based, □Oily, □SolventSolid category□Agglomerate, □Crystals, □Primary particle
Liquid to solid ratio(%)      Viscosity Pa.s Material flow□Very good (water), □可以, □difference, □Very poor
Feed containsLarge particles mm,Take up %Medium particle mm,Take up %Small particles mm,Take up %
Solid particles(□fragile, □Not fragile, □Viscous)Discharge granule μmHead mtemperature ℃
Remarks:
 Second, your company's requirements for equipment:
 1. Material contact part material□stainless steel 304, □stainless steel 316L, □Duplex steel 2205, □TA2, □HastelloyC276
 2, rotating stator material□stainless steel 304, □stainless steel 316L, □Duplex steel 2205, □TA2, □Hastelloy C276,
□Wear-resistant steel NM500, □Wear-resistant steel 38CrMoAl, □Tungsten carbide treatment, □Emery treatment
 3, sealed□Ordinary single-sided mechanical seal, □Ordinary double-sided mechanical seal, □Custom double-sided mechanical seal
O-ring configuration□Ding O-ring, □Fluoro rubber O-ring, □Fluorine-containing O-ring, □Perfluoroether O-ring
Material contact surface□Tungsten carbide-silicon carbide, □Tungsten carbide-tungsten carbide, □Silicon carbide-silicon carbide
 4, the motor□Ordinary motor, □Inverter motor, □Ordinary explosion-proof motor, □Explosion-proof inverter motor, □Dust explosion-proof motor
□Class 2 energy efficient motor, □Marine motor, □Waterproof motor□Self-contained control box□With control box
 Third, the corresponding device model:
Full name of the equipmentModelProcessing capacitym³/h)Motor Power(kw)AmountRemarks
other


Fill in the unit:          Fill in the person:          phone:

Daily chemical industry: AES、LAS、AOS、MES、K12、Glycerin, sorbitol, fatty alcohol, shower gel, skin cream, shampoo, hand soap, toothpaste, soap, detergent powder, etc.

Fine Chemicals:Dyes, pigments, various pastes, chemical additives, adhesives, 107 glue, silicone oil, leather oil, emulsion explosives, various colloidal materials.

Food:Chocolate, condensed milk, yogurt, honey, syrup, sucrose, tomato juice, concentrated juice, jam, ice cream, milk, yeast mud, meat, jelly, condiments, vinasse, soy protein, flour, etc.

Paper production:Polyacrylamide (PAM), calcium carbonate, starch paste, carboxylated butylbenzene/propylbenzene latex, rosin, rosin gum, pulp, filler, dry strength: agent, wet strength agent, sizing agent, retention and drainage aid, elimination Foaming, coating, water treatment chemicals, etc.

Chemical fiber:Viscose porridge, PVA, vinylon pulp, acrylic pulp, amine pulp, polyester chips, polyester, polypropylene, rayon, functional fiber, etc.

Medical medicine:Various ointments, extracts, drug lotions, pill pastes, syrups, health products, pharmaceuticals, etc.

Coating:Paints, coatings, inks, insulating varnishes, resins, auxiliaries, organic solvents, etc.

暂未实现,敬请期待
暂未实现,敬请期待
Similar Product Recommend