Welcome Customer !

Membership

Nantong Fleck Fluid Equipment Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 混合/乳化设备

Xwboo>Products

Nantong Fleck Fluid Equipment Co., Ltd.Free·1YRS

  • E-mail

    flk@ntflk.com

  • Phone

    86-513-833516928332235283632563

  • Address

    No. 5, Youth East Road, Science and Technology Pioneer Park, Qidong City, Jiangsu Province

Contact Now

Static mixer

Model
Nature of the Manufacturer
Other
Product Category
Solid-liquid mixing pump series
Place of Origin
City, Province
Overview
Static mixer
Product Details

静态混合器  The static mixer is a high-efficiency mixing device without motion. The two or more fluids are cut, sheared, rotated and remixed by the mixing unit internals fixed in the tube to achieve good dispersion and thorough mixing between the fluids. purpose.

Corresponding parameter set not found, please add it in property template of background

SV static mixer

Model specificationNominal diameter(mm)Flow T/h
SV-2.3/20200.5-1.2
SV-2.3/25250.9-1.8
SV-3.5/32321.4-2.9
SV-3.5/40402.2-4.5
SV-3.5/50503.5-7
SV-3.5/65655-12
SV-5/80809-18
SV-5/10010014-28
SV-5~7/12512524-34
SV-5~7/15015030-60
SV-5~20/20020056-110
SV-5~20/25025088-176

SX static mixer

Model specificationNominal diameter(mm)Flow T/h
SX-12.5/50503.5-7.0
SX-16.25/65656-12
SX-20/80809-18
SX-25/10010014-28
SX-31.25/12512522-44
SX-37.5/15015030-60
SX-50/20020056-110
SX-62.5/25025088-176

SK type static mixer

Specification typeNominal diameter(mm)Flow T/h
SK-5/10100.15-0.3
SK-7.5/15150.3-0.6
SK-10/20200.6-1.2
SK-12.5/25250.9-1.8
SK-16/32321.4-3.2
SK-20/40402.2-4.5
SK-25/50503.5-7.0
SK-32.5-65655.9-12
SK-40/80809-18
SK-50/10010014-28
SK-62.5/12512522-44
SK-75/15015031-64
SK-100/20020056-110
SK-125/25025088-177

SH type static mixer

Specification typeNominal diameter(mm)Flow T/h
SH-3/15150.1-0.2
SH-4.5-20200.2-0.4
SH-5/25250.5-1.1
SH-7/32320.9-1.8
SH-9/40401.6-3.2
SH-12/50502.3-4.6
SH-19/80804.0-8.0
SH-24/1001006.5-13.0
SH-36/15015031-63
SH-49/20020054-108

Note: The flange sizes at both ends are enlarged by the nominal diameter of the product.

静态混合器

SV static mixer

Product Features

  The SV type unit is a cylinder assembled from a corrugated board of a certain specification. Technical characteristics: the highest dispersion degree is 1-2 μm, and the liquid-liquid phase and gas-gas phase unevenness coefficient are: σX ≤ 1 to 5%. It is suitable for mixed emulsification of liquid-liquid, liquid-gas and gas-gas with viscosity ≤102 centipoise, reaction, absorption, extraction and heat transfer enhancement.

  Dh≤3.5 for cleaning media with viscosity ≤102 centipoise

  Dn ≥ 5 application media can be accompanied by a small amount of non-stick impurities

静态混合器SX static mixer

Product Features

  The unit consists of a plurality of X-shaped units in a regular pattern by crossed strips. Technical characteristics: the mixing unevenness is σX ≤ 1 to 5%. It is suitable for the mixing and reaction process of medium-high viscosity liquid-liquid reaction, mixing, absorption process or production of high polymer fluid with viscosity ≤104 centipoise. The effect is better when the treatment volume is large.

静态混合器SK type static mixer

Product Features

  The unit is welded by a single-channel left and right twisted spiral piece. Its technical performance: the highest dispersion degree is ≤10μm, and the liquid-liquid and liquid-solid phase unevenness coefficient σX≤5%. It is suitable for mixing, reaction, extraction, absorption, injection molding, color matching and heat transfer in chemical, petroleum, pharmaceutical, food, fine processing, plastics, environmental protection, synthetic fiber, mineral processing and other departments. It is suitable for highly viscous media with a small flow rate and mixed with impurities or viscosity ≤ 106 centipoise.

静态混合器SH type static mixer

Product Features

  The unit is composed of two-channel, a spiral piece is placed in the hole, and the orientation of the adjacent two-channel is 90°, and a fluid redistribution chamber is arranged between the units. The technical characteristics are as follows: the highest degree of dispersion is 1-2 μm, and the liquid-liquid phase unevenness is: σ X ≤ 1 to 5%. It is suitable for mixing, emulsifying, color matching, injection spinning, heat transfer and other processes in fine processing, plastics, synthetic fiber, mineral processing and other departments. It is especially suitable for medium and high viscosity (≤106 centipoise) cleaning media with low flow rate and high mixing requirements. Suitable for.

Accessories: Equipment selection parameters and technical requirements (downloadable)

 First, the technical parameters of your company's materials:
Material medium Processing capacity(m³/h)
Liquid category□Water-based, □Oily, □SolventSolid category□Agglomerate, □Crystals, □Primary particle
Liquid to solid ratio(%)      Viscosity Pa.s Material flow□Very good (water), □可以, □difference, □Very poor
Feed containsLarge particles mm,Take up %Medium particle mm,Take up %Small particles mm,Take up %
Solid particles(□fragile, □Not fragile, □Viscous)Discharge granule μmHead 米temperature ℃
Remarks:
 Second, your company's requirements for equipment:
 1. Material contact part material□stainless steel 304, □stainless steel 316L, □Duplex steel 2205, □TA2, □HastelloyC276
 2, rotating stator material□stainless steel 304, □stainless steel 316L, □Duplex steel 2205, □TA2, □Hastelloy C276,
□Wear-resistant steel NM500, □Wear-resistant steel 38CrMoAl, □Tungsten carbide treatment, □Emery treatment
 3, sealed□Ordinary single-sided mechanical seal, □Ordinary double-sided mechanical seal, □Custom double-sided mechanical seal
O-ring configuration□Ding O-ring, □Fluoro rubber O-ring, □Fluorine-containing O-ring, □Perfluoroether O-ring
Material contact surface□Tungsten carbide-silicon carbide, □Tungsten carbide-tungsten carbide, □Silicon carbide-silicon carbide
 4, the motor□Ordinary motor, □Inverter motor, □Ordinary explosion-proof motor, □Explosion-proof inverter motor, □Dust explosion-proof motor
□Class 2 energy efficient motor, □Marine motor, □Waterproof motor□Self-contained control box□With control box
 Third, the corresponding device model:
Full name of the equipmentModelProcessing capacitym³/h)Motor Power(kw)AmountRemarks
other


Fill in the unit:          Fill in the person:          phone:

Daily chemical industry: AES、LAS、AOS、MES、K12、Glycerin, sorbitol, fatty alcohol, shower gel, skin cream, shampoo, hand soap, toothpaste, soap, detergent powder, etc.

Fine Chemicals:Dyes, pigments, various pastes, chemical additives, adhesives, 107 glue, silicone oil, leather oil, emulsion explosives, various colloidal materials.

Food:Chocolate, condensed milk, yogurt, honey, syrup, sucrose, tomato juice, concentrated juice, jam, ice cream, milk, yeast mud, meat, jelly, condiments, vinasse, soy protein, flour, etc.

Paper production:Polyacrylamide (PAM), calcium carbonate, starch paste, carboxylated butylbenzene/propylbenzene latex, rosin, rosin gum, pulp, filler, dry strength: agent, wet strength agent, sizing agent, retention and drainage aid, elimination Foaming, coating, water treatment chemicals, etc.

Chemical fiber:Viscose porridge, PVA, vinylon pulp, acrylic pulp, amine pulp, polyester chips, polyester, polypropylene, rayon, functional fiber, etc.

Medical medicine:Various ointments, extracts, drug lotions, pill pastes, syrups, health products, pharmaceuticals, etc.

Coating:Paints, coatings, inks, insulating varnishes, resins, auxiliaries, organic solvents, etc.

暂未实现,敬请期待
暂未实现,敬请期待
Similar Product Recommend