Welcome Customer !

Membership

Nantong Fleck Fluid Equipment Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 混合/乳化设备

Xwboo>Products

Nantong Fleck Fluid Equipment Co., Ltd.Free·1YRS

  • E-mail

    flk@ntflk.com

  • Phone

    86-513-833516928332235283632563

  • Address

    No. 5, Youth East Road, Science and Technology Pioneer Park, Qidong City, Jiangsu Province

Contact Now

Soy bean grinder

Model
Nature of the Manufacturer
Other
Product Category
Special beating equipment
Place of Origin
City, Province
Overview
Soy bean grinder
Product Details

  The main function of the Fleck FLK-HD type soy wet grinder is: when the fluid enters the pump body, the particles are first sucked into the crushing and cutting chamber by the suction device. Under the action of the high-speed rotating centrifugal force, the particles are picked up by the blade angle. The knife edge smashing cutting zone is cut and pulverized by the teeth of the tail of the blade and the stator blade of the stator. The particles are broken into three pieces and then turned into tiny particles to enter the next process. There are three such cutting and crushing zones. The first pass will feed large particles into coarse crushing, the second pass will be crushed, and the third pass will be finely crushed. At this time, the particles have become micro-particles and enter the second group of crushing chambers. The crushing chamber is composed of several hundred canine teeth. When the small particles in the fluid enter the second crushing zone, the crushing teeth of the second zone are all triangular-shaped. The sprocket wheel has a relatively large shear surface area and a higher frequency of shearing and shearing, and the microparticles in the fluid are immediately further refined. After entering the third grinding zone, the fluid must withstand tens of millions of strong shears, high-speed impact, powder grinding, high-frequency turbulence, and the fluid is fully fined through the uneven and narrow canines. Chemical.

11 11

Corresponding parameter set not found, please add it in property template of background
Model Processing capacity(m³h)Motor Power(kw) Import and exportmmPrecautions
FLK-HD500.3-25.5-1165/50The processing capacity of the technical parameters of this equipment is based on water as the medium. The actual processing amount should be determined according to the refinement degree and viscosity of the material. The installation method and configuration of the equipment can be determined according to the needs of users. The picture of this page can be used as a reference. , Note: Motor power is configured according to the hardness of the material viscosity particles
FLK-HD651-57-1880/65
FLK-HD803-1022-45100/80
FLK-HD1005-1530-75125/100
FLK-HD1508-2045-110150/175
FLK-HD20012-3075-160200/225

1. Soy beans can be directly pulverized by pipe after soaking

2. This type of pulverizer has the thickness and thickness, and can consult technical experts in detail.

3. Fully enclosed design, high quality stainless steel for material contact

4. Large output, high fineness, adjustable discharge particles

The main structure of the Fleck soy wet grinder

  The Fleck FLK-HD type soy wet grinder is a special equipment specially designed for the wet crushing of soybeans by Fleck FLECK. The Fleck FLK-HD type soy wet grinder mainly consists of an electric motor, a bearing housing and a pump body. The pump body is composed of a feed flange, a suction device, a rotating stator, a spindle, and a mechanical seal. The rotary stator is made up of several sets of cutting teeth, crushing middle teeth, and grinding fine teeth. The working chamber of the rotating stator is precisely arranged by thousands of smashed teeth with staggered and uneven teeth, and the distance between the rotating stator and the stator can be adjusted to 0-2mm according to the material performance and requirements to ensure the fineness of the discharging.

Accessories: Equipment selection parameters and technical requirements (downloadable)

 First, the technical parameters of your company's materials:
Material medium Processing capacity(m³/h)
Liquid category□Water-based, □Oily, □SolventSolid category□Agglomerate, □Crystals, □Primary particle
Liquid to solid ratio(%)      Viscosity Pa.s Material flow□Very good (water), □可以, □difference, □Very poor
Feed containsLarge particles mm,Take up %Medium particle mm,Take up %Small particles mm,Take up %
Solid particles(□fragile, □Not fragile, □Viscous)Discharge granule μmHead mtemperature ℃
Remarks:
 Second, your company's requirements for equipment:
 1. Material contact part material□stainless steel 304, □stainless steel 316L, □Duplex steel 2205, □TA2, □HastelloyC276
 2, rotating stator material□stainless steel 304, □stainless steel 316L, □Duplex steel 2205, □TA2, □Hastelloy C276,
□Wear-resistant steel NM500, □Wear-resistant steel 38CrMoAl, □Tungsten carbide treatment, □Emery treatment
 3, sealed□Ordinary single-sided mechanical seal, □Ordinary double-sided mechanical seal, □Custom double-sided mechanical seal
O-ring configuration□Ding O-ring, □Fluoro rubber O-ring, □Fluorine-containing O-ring, □Perfluoroether O-ring
Material contact surface□Tungsten carbide-silicon carbide, □Tungsten carbide-tungsten carbide, □Silicon carbide-silicon carbide
 4, the motor□Ordinary motor, □Inverter motor, □Ordinary explosion-proof motor, □Explosion-proof inverter motor, □Dust explosion-proof motor
□Class 2 energy efficient motor, □Marine motor, □Waterproof motor□Self-contained control box□With control box
 Third, the corresponding device model:
Full name of the equipmentModelProcessing capacitym³/h)Motor Power(kw)AmountRemarks
other


Fill in the unit:          Fill in the person:          phone:

Daily chemical industry: AES、LAS、AOS、MES、K12、Glycerin, sorbitol, fatty alcohol, shower gel, skin cream, shampoo, hand soap, toothpaste, soap, detergent powder, etc.

Fine Chemicals:Dyes, pigments, various pastes, chemical additives, adhesives, 107 glue, silicone oil, leather oil, emulsion explosives, various colloidal materials.

Food:Chocolate, condensed milk, yogurt, honey, syrup, sucrose, tomato juice, concentrated juice, jam, ice cream, milk, yeast mud, meat, jelly, condiments, vinasse, soy protein, flour, etc.

Paper production:Polyacrylamide (PAM), calcium carbonate, starch paste, carboxylated butylbenzene/propylbenzene latex, rosin, rosin gum, pulp, filler, dry strength: agent, wet strength agent, sizing agent, retention and drainage aid, elimination Foaming, coating, water treatment chemicals, etc.

Chemical fiber:Viscose porridge, PVA, vinylon pulp, acrylic pulp, amine pulp, polyester chips, polyester, polypropylene, rayon, functional fiber, etc.

Medical medicine:Various ointments, extracts, drug lotions, pill pastes, syrups, health products, pharmaceuticals, etc.

Coating:Paints, coatings, inks, insulating varnishes, resins, auxiliaries, organic solvents, etc.

暂未实现,敬请期待
暂未实现,敬请期待
Similar Product Recommend