Welcome Customer !

Membership

Changsha PDM Machinery (Group) Co., Ltd
Free Member ·1YRS
,
Other

Main Products: 泵

Xwboo>Products

Changsha PDM Machinery (Group) Co., LtdFree·1YRS

  • E-mail

    jennypump@163.com ,sales@pdmmachinery.com

  • Phone

    +86-0731-82521869

  • Address

    2944-3, Asia commercial building, South shaoshan road, Yuhua district, Changsha city, Hunan province, China

Contact Now

YRKK-series 6KV, 10KV wound rotor three phase asynchronous motor

Model
Nature of the Manufacturer
Other
Product Category
Motor engine & motor pump set
Place of Origin
City, Province
Overview
YRKK-series 6KV, 10KV wound rotor three phase asynchronous motor
Product Details
Introduction

 

YRKK-series 6KV, 10KV wound rotor three phase asynchronous motor
1.Brief Description:
YRKK-series 6KV, 10KV wound rotor three phase asynchronous motor conform to IEC standard. The motor has such advantages as high efficiency, energy-saving, low noise, low vibration, light weight and reliable performance. They are easy for installation and maintenance. The motor can generate larger starting torque at the state of relatively lower starting current and the speed can be adjusted within a limited range. It is suitable for the following applications:
A larger starting torque is required that cannot be obtained from a squirrel-cage motor.
The capacity of the feeder line is insufficient to start a squirrel-cage motor.
Applications where the longer starting time and frequent starting are needed.
Adjustment of speed is needed with in a limited range such as windlass, press machines, drawing machines, etc.
The YRKK-series motor adopts Class-F insulation. The bearing structure is designed according to IP54,and grease lubrication are used Non-stopping ill-filled and oil-discharging units are provided.
The structure and the mounting type of the motor is of IMB3 with continuous duty(S1),The rated volt are 6kv,10kv,other voltage requirement or special requirement should be negotiate with manufacturer before order is placed.
2.The meaning of Type:

3.Technical Data see appendix 1.
4.Mounting and Contour Dimensions see appendix 2.
5.When ordering, the following requirement should be specified:
Frame size(such as:YKK3551-4) Mounting Type(IMB3)
Rated Power(185W) Protection Degree(IP54)
Rated Voltage(6000v) Cooling Method(IC611)
Rated Frequency(50HZ) Insulation Class( Class F)
Synchronous Speed(1500r/min) Ambient Conditions(altitude should not be over 1000m above
sea level, ambient temperature varying with seasons should
not exceed 40 degree)

 

 

Similar Product Recommend