Press button to switch between modes.
(I, II, III, AUTO, BL1, BL2, BL3, HD1, HD2, HD3)

Technical data

Performance curve

Installation drawing

suitable for the following system:
·Stable heating system with variable flow
·Heating system with variable pipeline temperature
·Industrial circulation system
·Home heating and domestic water supply system
Service conditions
1. Ambient temperature
The ambient temperature is 0℃~+70℃.
2. Relative humidity of the air (RH)
The maximum humidity is 95%.
3. Media (conveying liquid) temperature
Temperature of liquid conveying +2℃~110℃.
To prevent the control box and stator from appearing condensate water, the temperature of
pump conveying liquid must be always higher than the ambient temperature.
4. System pressure
The maximum is 1.0 MPa (10 bar).
5. Protection Level
IP44
6. Inlet pressure
To avoid damage to the pump bearing caused by cavitation noise, the following minimum
pressure should be maintained in the pump inlet:

7. Pumping liquid
Thin, clean, non-corrosive and non-explosive liquid does not contain any solid particles,
fibers or mineral oil; the pump should not be used for conveying flammable liquid such as vegetable
oil and gasoline absolutely. If the circulating pump is used for the case of high viscosity,
the pump performance will reduce, therefore, when selecting a pump, the viscosity of liquid must
be considered.
