Welcome Customer !

Membership

HEFEI XINHU CANNED MOTOR PUMP CO.,LTD
Free Member ·1YRS
,
Other

Main Products: 泵

Xwboo>Products

PFM03-30 EC Permanent magnet constant pressure variable frequency multistage pump

Model
Nature of the Manufacturer
Other
Product Category
Centrifugal pump
Place of Origin
City, Province
Overview
PFM03-30 EC Permanent magnet constant pressure variable frequency multistage pump
Product Details

1 Product Application Conditions
1.1 Media requirements
Use medium: water
Medium water temperature: 0℃~50℃
Medium PH value: 6.5~8.5
Medium hardness: ≤25°dH
Solid impurity content in the medium: solid impurity diameter and length direction ≤ 0.1mm, and volume ratio ≤ 0.1%.
1.2 Use environment requirements
How to use: keep the axis horizontal
Altitude: <1000m
Operating environment temperature: 0℃~55℃ (no freezing phenomenon in the pipeline and water pump)
Use environment humidity ≤95%
1.3 Storage environment requirements
Storage ambient temperature: -20°C~60°C (no freezing in pipelines and pumps)
Storage environment humidity ≤95%
2. Product installation direction diagram
When the water pump is installed, the pump shaft must be in a horizontal position, and the pump shaft is allowed to be installed at an angle of ±5°. The installation of the water pump in the system should ensure that the pump cavity is filled with liquid so that the water pump can operate normally. Pipeline installation must be carried out according to the diagram, and the rubber pads should be well supported.
3. Start and stop of water pump
Start-up time: The start-up time of the water pump is less than 5s, that is, the time from power-on to maximum speed
Downtime: the pump stop time < 3s, that is, the time from when the pump is powered off to when it stops running

4. Basic parameters of the product

Maximum flow(m³/h):5.5 Maximum head(m):45 Voltage:AC 220V/50Hz
Rated flow(m³/h):3.0 Rated head(m):30 Maximum input power:600W
Design pressure:1.0MPa Protection class:IP44 Maximum speed:5000rpm
Noise:<58dB(A)(Max flow) Bare pump weight:9.2kg±5% Self-priming height:≤8m
Standby power consumption:≤10W Inlet and outlet pipe diameter:DN25 Steering: counterclockwise when viewed from the pump inlet

5. Product certification

Products comply with CCC, GS (CE), EMC, RoHS, REACH, WRAS certification requirements.

6. Motor type

Motor type: permanent magnet synchronous motorEnameled wire material: copperMagnetic steel material: NdFeB
DC cold state resistance of the motor at 20°C: 3.77±5%ΩInsulation class: F
7. Performance Curve

Flow-Power Performance Curves

Flow-Head performance curves


Similar Product Recommend