Welcome Customer !

Membership

HEFEI XINHU CANNED MOTOR PUMP CO.,LTD
Free Member ·1YRS
,
Other

Main Products: 泵

Xwboo>Products

GPA25-4 II 130/180 PWM High Efficiency Circulator pump

Model
Nature of the Manufacturer
Other
Product Category
GPA II High Efficiency Circulation Pump
Place of Origin
City, Province
Overview
GPA25-4 II 130/180 PWM High Efficiency Circulator pump
Product Details

This pump is equipped with permanent-magnet motor and different pressure controller, capable of automatically &continuously adjustting motor performance to meet the actual needs of system.

This pump is equipped with control panel on the front for easy operation by users.

Advantages

Easy installation and start-up

Provided with self-adaptive mode AUTO.

(inital seeting)In most case, the motor pump needs no adjustment and can be readily started and automatically adjust to meet the actul needs of systems.

High-degree comfort

Low operational noise of mtor pump and whole system.

Low energy consumption

Compared with traditional circualtion motor pumps, it has lower energy consumption. GPA series circulation motor pump is attached with Europe Energy Lable Class A marking, and the minimum energy consumption can reach up to 5W.

Intuitive one-button operation makes selection of any control mode simple

No external motor protection required reducing installation time

High-torque start improves startup under harsh conditions

Maintenance free and noiseless due to canned-rotor design and use of robust components

Fast connection plug makes electrical installation quick, safe and easy

Insulating shells  are available to minimize heat loss in heating systems

The pump also features six control modes – with total ten curves

Proportional-pressure control

Constant-pressure control

Constant-curve mode

Auto

Night mode

PWM external control

The display shows the actual power consumption in Watts. LEDs indicate the actual operating status.

The pump has a ceramic shaft and radial bearings, carbon thrust bearing, stainless-steel rotor can, bearing plate and rotor cladding, composite impeller, all of which contribute to long life.

The pump is self-venting through the system, which contributes to easy commissioning. The compact design with integrated control box and control panel on side of the motor fits into most common installations.

The pump housing is made of cast iron and electro coated to improve the corrosion resistance.

The motor is a synchronous permanent-magnet/compact-stator motor characterized by high efficiency.

The pump speed is controlled by an integrated frequency converter incorporated in the control box.

Parameters:

Model: GPA25-4 II 130/180

Power: 5~22W

Max.flow: 2.5 m³/h

Max head: 4m

Current: 0.05~0.19A

Voltage/ Frequency: 230V/50HZ

Pump housing: Cast iron

Pumped liquid: Water

Insulation class: H

Degree of Protection: IP42

Liquid temperature range: -30-110℃

Energy(EEI): ≤0.20-Part2

Max System Pressure: 1.0MPa