D DM DF pump series horizontal single suction segmented multistage centrifugal pump.The suction inlet of d-type pump is horizontal and the outlet is vertical;The outlet and suction inlet of DF and DM pumps (only the suction inlet of df155-30 is horizontal) are vertically upward.Pump shell parts such as suction section middle section ejection section and bearing body are connected with tension bolts.Select the pump series according to the pump head.The rotor part of this series pump is mainly composed of the shaft and the impeller axle sleeve balance plate and other parts installed on the shaft. The number of the impeller depends on the series of the pump.The shaft parts are fastened with flat keys and shaft nuts to make them integrated with the shaft.The entire rotor is supported by rolling bearings or sliding bearings at both ends.According to the different types of bearings do not bear the axial force its axial force by the balance plate balance.The pump allows the rotor to swim axially in the pump housing during operation and the centripetal ball bearing cannot be used.The rolling bearings are lubricated with grease the sliding bearings are lubricated with thin oil and the oil rings are self-lubricated and the circulating water is cooled.The series pumps are driven directly by the prime mover through an elastic coupling.
Product use
It can be used to transport clean water without solid particles (abrasives) suspended matter or other liquids with similar physical and chemical properties to clean water.It can also be used by changing the material of the pump (or the material of the flow part of the pump) sealing form and adding cooling system for conveying hot water oils corrosive or wear resistant media etc.
- Type D: type D pump is used to transport clean water with no solid particles and temperature lower than 80℃ or liquids with physical and chemical properties similar to that of clean water.Suitable for mine factory and urban water supply and drainage engineering.
- DF type: DF type pump is used for conveying corrosive liquid with no solid particles and temperature between -20℃ and 105℃. The allowable pressure at the pump inlet is less than 0.6mpa.The user can reasonably choose the material sealing form structure of the pump and determine the capacity of the motor according to the name of the conveying medium concentration specific gravity operating temperature and inlet pressure of the pump.
- DM (or MD type) : DM (or MD type) is used to transport neutral mine drainage and other similar sewage with particle content ≤1.5% particle size ≤0.5mm and temperature between -20 ℃ and 80℃.
| No. | model | Flow(m3/h) | Head(m) | Matching motor |
| Model | Power(kw) |
| 1 | DG6-25×2 | 6.3 | 50 | Y2-100L-2 | 3 |
| 2 | DG6-25×3 | 6.3 | 75 | Y2-132S1-2 | 5.5 |
| 3 | DG6-25×4 | 6.3 | 100 | Y2-132S2-2 | 7.5 |
| 4 | DG6-25×5 | 6.3 | 125 | Y2-132S2-2 | 7.5 |
| 5 | DG6-25×6 | 6.3 | 150 | Y2-160M1-2 | 11 |
| 6 | DG6-25×7 | 6.3 | 175 | Y2-160M1-2 | 11 |
| 7 | DG6-25×8 | 6.3 | 200 | Y2-160M2-2 | 15 |
| 8 | DG6-25×9 | 6.3 | 225 | Y2-160M2-2 | 15 |
| 9 | DG6-25×10 | 6.3 | 250 | Y2-160L-2 | 18.5 |
| 10 | DG6-25×11 | 6.3 | 275 | Y2-160L-2 | 18.5 |
| 11 | DG6-25×12 | 6.3 | 300 | Y2-160L-2 | 18.5 |
| 12 | DG12-25×2 | 12.5 | 50 | Y2-132S1-2 | 5.5 |
| 13 | DG12-25×3 | 12.5 | 75 | Y2-132S2-2 | 7.5 |
| 14 | DG12-25×4 | 12.5 | 100 | Y2-160M1-2 | 11 |
| 15 | DG12-25×5 | 12.5 | 125 | Y2-160M1-2 | 11 |
| 16 | DG12-25×6 | 12.5 | 150 | Y2-160M2-2 | 15 |
| 17 | DG12-25×7 | 12.5 | 175 | Y2-160M2-2 | 15 |
| 18 | DG12-25×8 | 12.5 | 200 | Y2-160L-2 | 18.5 |
| 19 | DG12-25×9 | 12.5 | 225 | Y2-160L-2 | 18.5 |
| 20 | DG12-25×10 | 12.5 | 250 | Y2-180M-2 | 22 |
| 21 | DG12-25×11 | 12.5 | 275 | Y2-180M-2 | 22 |
| 22 | DG12-25×12 | 12.5 | 300 | Y2-200L1-2 | 30 |
| 23 | DG12-50×2 | 12.5 | 100 | Y2-160M1-2 | 11 |
| 24 | DG12-50×3 | 12.5 | 150 | Y2-160L-2 | 18.5 |
| 25 | DG12-50×4 | 12.5 | 200 | Y2-180M-2 | 22 |
| 26 | DG12-50×5 | 12.5 | 250 | Y2-200L1-2 | 30 |
| 27 | DG12-50×6 | 12.5 | 300 | Y2-200L1-2 | 30 |
| 28 | DG12-50×7 | 12.5 | 350 | Y2-200L2-2 | 37 |
| 29 | DG12-50×8 | 12.5 | 400 | Y2-225M-2 | 45 |
| 30 | DG12-50×9 | 12.5 | 450 | Y2-225M-2 | 45 |
| 31 | DG12-50×10 | 12.5 | 500 | Y2-250M-2 | 55 |
| 32 | DG12-50×11 | 12.5 | 550 | Y2-250M-2 | 55 |
| 33 | DG12-50×12 | 12.5 | 600 | Y2-280S-2 | 75 |
| 34 | DG25-30×2 | 25 | 60 | Y2-160M1-2 | 11 |
| 35 | DG25-30×3 | 25 | 90 | Y2-160M2-2 | 15 |
| 36 | DG25-30×4 | 25 | 120 | Y2-160L-2 | 18.5 |
| 37 | DG25-30×5 | 25 | 150 | Y2-180M-2 | 22 |
| 38 | DG25-30×6 | 25 | 180 | Y2-200L1-2 | 30 |
| 39 | DG25-30×7 | 25 | 210 | Y2-200L1-2 | 30 |
| 40 | DG25-30×8 | 25 | 240 | Y2-200L2-2 | 37 |
| 41 | DG25-30×9 | 25 | 270 | Y2-200L2-2 | 37 |
| 42 | DG25-30×10 | 25 | 300 | Y2-225M-2 | 45 |
| 43 | DG25-50×3 | 25 | 150 | Y2-180M-2 | 22 |
| 44 | DG25-50×4 | 25 | 200 | Y2-200L1-2 | 30 |
| 45 | DG25-50×5 | 25 | 250 | Y2-200L2-2 | 37 |
| 46 | DG25-50×6 | 25 | 300 | Y2-225M-2 | 45 |
| 47 | DG25-50×7 | 25 | 350 | Y2-250M-2 | 55 |
| 48 | DG25-50×8 | 25 | 400 | Y2-280S-2 | 75 |
| 49 | DG25-50×9 | 25 | 450 | Y2-280S-2 | 75 |
| 50 | DG25-50×10 | 25 | 500 | Y2-280S-2 | 75 |
| 51 | DG25-50×11 | 25 | 550 | Y2-280M-2 | 90 |
| 52 | DG25-50×12 | 25 | 600 | Y2-315S-2 | 110 |
| 53 | DG35-12×2 | 35 | 22.8 | Y2-112M-2 | 4 |
| 54 | DG35-12×3 | 35 | 34.2 | Y2-132S1-2 | 5.5 |
| 55 | DG35-12×4 | 35 | 45.6 | Y2-132S2-2 | 7.5 |
| 56 | DG35-12×5 | 35 | 57 | Y2-160M1-2 | 11 |
| 57 | DG35-12×6 | 35 | 68.4 | Y2-160M1-2 | 11 |
| 58 | DG35-12×7 | 35 | 79.8 | Y2-160M2-2 | 15 |
| 59 | DG35-12×8 | 35 | 91.2 | Y2-160M2-2 | 15 |
| 60 | DG35-12×9 | 35 | 102.6 | Y2-160L-2 | 18.5 |
| 61 | DG46-30×2 | 46 | 60 | Y2-160M2-2 | 15 |
| 62 | DG46-30×3 | 46 | 90 | Y2-180M-2 | 22 |
| 63 | DG46-30×4 | 46 | 120 | Y2-200L1-2 | 30 |
| 64 | DG46-30×5 | 46 | 150 | Y2-200L2-2 | 37 |
| 65 | DG46-30×6 | 46 | 180 | Y2-200L2-2 | 37 |
| 66 | DG46-30×7 | 46 | 210 | Y2-225M-2 | 45 |
| 67 | DG46-30×8 | 46 | 240 | Y2-250M-2 | 55 |
| 68 | DG46-30×9 | 46 | 270 | Y2-250M-2 | 55 |
| 69 | DG46-30×10 | 46 | 300 | Y2-280S-2 | 75 |
| 70 | DG46-50×2 | 46 | 100 | Y2-200L1-2 | 30 |
| 71 | DG46-50×3 | 46 | 150 | Y2-200L2-2 | 37 |
| 72 | DG46-50×4 | 46 | 200 | Y2-225M-2 | 45 |
| 73 | DG46-50×5 | 46 | 250 | Y2-250M-2 | 55 |
| 74 | DG46-50×6 | 46 | 300 | Y2-280S-2 | 75 |
| 75 | DG46-50×7 | 46 | 350 | Y2-280M-2 | 90 |
| 76 | DG46-50×8 | 46 | 400 | Y2-280M-2 | 90 |
| 77 | DG46-50×9 | 46 | 450 | Y2-315S-2 | 110 |
| 78 | DG46-50×10 | 46 | 500 | Y2-315M-2 | 132 |
| 79 | DG46-50×11 | 46 | 550 | Y2-315M-2 | 132 |
| 80 | DG46-50×12 | 46 | 600 | Y2-315M-2 | 132 |
| 81 | DG54-16×2 | 54 | 32 | Y2-132S2-2 | 7.5 |
| 82 | DG54-16×3 | 54 | 48 | Y2-160M2-2 | 15 |
| 83 | DG54-16×4 | 54 | 64 | Y2-160L-2 | 18.5 |
| 84 | DG54-16×5 | 54 | 80 | Y2-180M-2 | 22 |
| 85 | DG54-16×6 | 54 | 96 | Y2-180M-2 | 22 |
| 86 | DG54-16×7 | 54 | 112 | Y2-200L1-2 | 30 |
| 87 | DG54-16×8 | 54 | 128 | Y2-200L1-2 | 30 |
| 88 | DG54-16×9 | 54 | 144 | Y2-200L2-2 | 37 |
| 89 | DG85-45×2 | 85 | 90 | Y2-200L2-2 | 37 |
| 90 | DG85-45×3 | 85 | 135 | Y2-250M-2 | 55 |
| 91 | DG85-45×4 | 85 | 180 | Y2-280S-2 | 75 |
| 92 | DG85-45×5 | 85 | 225 | Y2-280M-2 | 90 |
| 93 | DG85-45×6 | 85 | 270 | Y2-315S-2 | 110 |
| 94 | DG85-45×7 | 85 | 315 | Y2-315M-2 | 132 |
| 95 | DG85-45×8 | 85 | 360 | Y2-315M-2 | 132 |
| 96 | DG85-45×9 | 85 | 405 | Y2-315L1-2 | 160 |
| 97 | DG85-67×3 | 85 | 201 | Y2-280M-2 | 90 |
| 98 | DG85-67×4 | 85 | 268 | Y2-315S-2 | 110 |
| 99 | DG85-67×5 | 85 | 335 | Y2-315L1-2 | 160 |
| 100 | DG85-67×6 | 85 | 402 | Y2-315L1-2 | 160 |
| 101 | DG85-67×7 | 85 | 469 | Y2-315M1-2 | 185 |
| 102 | DG85-67×8 | 85 | 536 | Y2-355M1-2 | 220 |
| 103 | DG85-67×9 | 85 | 603 | Y2-355M2-2 | 250 |
| 104 | DG100-25×2 | 101 | 43 | Y2-180M-2 | 22 |
| 105 | DG100-25×3 | 101 | 64.5 | Y2-200L1-2 | 30 |
| 106 | DG100-25×4 | 101 | 86 | Y2-200L2-2 | 37 |
| 107 | DG100-25×5 | 101 | 107.5 | Y2-225M-2 | 45 |
| 108 | DG100-25×6 | 101 | 129 | Y2-250M-2 | 55 |
| 109 | DG100-25×7 | 101 | 150.5 | Y2-280S-2 | 75 |
| 110 | DG100-25×8 | 101 | 172 | Y2-280S-2 | 75 |
| 111 | DG100-25×9 | 101 | 193.5 | Y2-280M-2 | 90 |
| 112 | DG120-50×2 | 120 | 100 | Y2-250M-2 | 55 |
| 113 | DG120-50×3 | 120 | 150 | Y2-280M-2 | 90 |
| 114 | DG120-50×4 | 120 | 200 | Y2-315S-2 | 110 |
| 115 | DG120-50×5 | 120 | 250 | Y2-315M-2 | 132 |
| 116 | DG120-50×6 | 120 | 300 | Y2-315L1-2 | 160 |
| 117 | DG120-50×7 | 120 | 350 | Y2-315L2-2 | 200 |
| 118 | DG120-50×8 | 120 | 400 | Y2-315L2-2 | 200 |
| 119 | DG120-50×9 | 120 | 450 | Y2-355M1-2 | 220 |
| 120 | DG155-30×3 | 155 | 90 | Y2-280S-4 | 75 |
| 121 | DG155-30×4 | 155 | 120 | Y2-280M-4 | 90 |
| 122 | DG155-30×5 | 155 | 150 | Y2-315S-4 | 110 |
| 123 | DG155-30×6 | 155 | 180 | Y2-315M-4 | 132 |
| 124 | DG155-30×7 | 155 | 210 | Y2-315L1-4 | 160 |
| 125 | DG155-30×8 | 155 | 240 | Y2-315L2-4 | 200 |
| 126 | DG155-30×9 | 155 | 270 | Y2-315L2-4 | 200 |
| 127 | DG155-30×10 | 155 | 300 | Y2-355M1-4 | 220 |
| 128 | DG155-67×2 | 155 | 134 | Y2-280M-2 | 90 |
| 129 | DG155-67×3 | 155 | 201 | Y2-315M-2 | 132 |
| 130 | DG155-67×4 | 155 | 268 | Y2-315M1-2 | 185 |
| 131 | DG155-67×5 | 155 | 335 | Y2-355M1-2 | 220 |
| 132 | DG155-67×6 | 155 | 402 | Y2-355L1-2 | 280 |
| 133 | DG155-67×7 | 155 | 469 | Y2-355L2-2 | 315 |
| 134 | DG155-67×8 | 155 | 536 | Y2-4505-2(10kV) | 355 |
| 135 | DG155-67×9 | 155 | 603 | Y2-4507-2(10kV) | 450 |
| 136 | DG280-43×2 | 280 | 86 | Y2-315S-4 | 110 |
| 137 | DG280-43×3 | 280 | 129 | Y2-315L1-4 | 160 |
| 138 | DG280-43×4 | 280 | 172 | Y2-315L2-4 | 200 |
| 139 | DG280-43×5 | 280 | 215 | Y2-355M2-4 | 250 |
| 140 | DG280-43×6 | 280 | 258 | Y2-355L2-4 | 315 |
| 141 | DG280-43×7 | 280 | 301 | Y2-4505-4(10kV) | 355 |
| 142 | DG280-43×8 | 280 | 344 | Y2-4007-4(10kV) | 450 |
| 143 | DG280-43×9 | 280 | 387 | Y2-4003-4(10kV) | 450 |