Flow range:0.0015~2280ml/min the :0.1-600rpm Application:glue packing;Liquid multichannel batch transfer;Enterprise large flow filling Speed control mode:Touch screen contro and key contro Speed control mode:Touch screen contro and key contro Display mode:5 inch-industrial grade-LCD screen Filling data storage-12;Support external control ; foot betal;high precis......
GS600/YZ2515X filling system ,with max flow 1740 ml/min for each head . suitable for micro or small bottle filling .
| Model | GS600/YZ2515x | Display Mode | 5 inch LCD screen |
| Speed Range | 0.1-600 rpm | Control Method | Touch screen |
| Filling Accuracy | <±0.5% | External control | start &stop |
| Flow Resolution | 0.01ml | Environment Temperature | 0-40℃ |
| Time resolution | 0.1s | Relatively Humidity | <80% |
| filling volume range | 0.001-9999.999ml | Power consumption | Each driver<50w |
| Filling time range | 0.3-9999.99s | Power supply | AC220V or AC110V |
| Pause Time range | 0.3-9999.99s | Motor Type | Stepper motor |
| Suction Angle | 0-360 ° | IP Rating | IP31 |
CR peristaltic pump filling system are based on bulk filling production requirment . which can meet production line with Conveyor belts, photoelectric switches, sensors, etc.
*Accurate angle control technology for high precision filling.*Color touch screen friendly interface dynamic displaying working state default parameters and system configuration at the same time.
*Intelligent calibration function.
*Online calibration function enables the intelligent calibration for the filling quantity before production.
*Guarantee the filling precision and increase your working efficiency.
*Online fine tuning function convenient to calibrate or fine tuning the filling units during the productions to avoid any error in case the fatigue or elasticity decreased of the tubing.
*It is available for expanding the filling units from one controller freely.
*Can save 12 sets of common filling modes to save time and increase the work efficiency.
*Stop automatically once there was no container for the fluid to avoid any error during the operations.Advantage of CR peristsaltic pump.
CR Peristaltic pump are easy to maintenance
replaceable tubes allow you to switch from one liquid to another in the shortest amount of time.
No need to rinse and disassemble after the flushable product, you only need to replace the peristaltic pump tubing
CR Peristaltic pump with high precisio
The calibration function can ensure the filling accuracy for each dose .The suckback function prevents liquid (reverse): in the dispense mode, after the end of the direct cycle, the return stroke is initiated to prevent the liquid from flowing out of the pump tube during the stop.
CR peristaltic pump are non-pollution: the fluid only contacts the pump tube and does not touch the pump body;
CR Peristaltic pump is Versatility
CR peristaltic pump can be used with a variety of products and can be used in a variety of industries.
CR peristasltic pump are easy to work
After the power is turned off and on, the control system maintains the current settings (pump head tubing model and other parameter ).
CR peristaltic pump with good sealing: It has good self-priming ability and can be idling to prevent backflow.
CR peristaltic pump with Low shear: ideal for conveying shear sensitive, aggressive fluids
For different customer’s requirement .now for the Ultra filling system GS600 series we have 2 programme .
| Programme | Model | Difference 1 | Difference 2 |
| Programme 1 | T | The same filling dose for multiple channels is only required to be set once in the touch screen panel (eg 4 channels only need to set 1 time) | Different filling channels cannot set different filling doses |
| Programme 2 | F | Multiple channels of the same filling dose need to be set multiple times (eg 4 channels need to be set 4 times) | Different filling channels can be set with different filling doses (eg channel 1: 5ml /channel 2 :10ml /channel 3: 15ml/ channel 4: 20ml ....) |
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
F is for different volume setting for each pump driver .
(different filling volume/filling time/pause time . copy number should set the same numbers ) .
Interface as below :

Model Guide :
| Model | Dimension(mm) | N. W (KG) | Speed (rpm) | Flow range(ml/min) For each head | Suitable tube model |
| GS600(4F)1*YZ1515x | 916*316*198 | 18.5 | 0.1-600 | 0.007-2280 | 13# 14# 16# 19# 25# 17# 18# |
| GS600(4F)1*YZ2515x | 916*316*198 | 18.5 | 0.1-600 | 0.17-1740 | 15# 24# |
| GS600(4F)1*KZ25 | 956*354*198 | 25 | 0.1-600 | 10-6000 | 15# 24# 35# 36# |
| GS600(4F)1*LP25-6 | 1120*389*198 | 32 | 0.1- 350 | 0.08-4500 | 2.4*2.4 3.6*2.4 15# 24# 35# 36# |
| GS600(4F)1*YZ35-13 | 1181*413*278 | 50 | 0.1-600 | 1.3-12000 | 73# 82# |
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
T is for same volume setting for each pump driver .
(same filling volume/filling time/pause time/copy numbers )
Interface as below :
T programme with same volume setting for each driver:
| Model | Dimension(mm) | N. W (KG) | Speed (rpm) | Flow range(ml/min) For each head | Suitable tube model |
| GS600(4T)1*YZ1515x | 916*316*198 | 18.5 | 0.1-600 | 0.007-2280 | 13# 14# 16# 19# 25# 17# 18# |
| GS600(4T)1*YZ2515x | 916*316*198 | 18.5 | 0.1-600 | 0.17-1740 | 15# 24# |
| GS600(4T)1*KZ25 | 956*354*198 | 25 | 0.1-600 | 10-6000 | 15# 24# 35# 36# |
| GS600(4T)1*LP25-6 | 1120*389*198 | 32 | 0.1- 350 | 0.08-4500 | 2.4*2.4 3.6*2.4 15# 24# 35# 36# |
| GS600(4T)1*YZ35-13 | 1181*413*278 | 50 | 0.1-600 | 1.3-12000 | 73# 82# |
Detailed explanation :
1, the drive specifications are distinguished by drivers
2, the number of drives defaults to 4. 2/3/5/6 Acceptable customization. (customization time about 10-20 work days )
3, T is for same volume setting for each driver . F is for different volume setting for each driver .
4,1* represents the number of pump heads per drive cascade, default is 1* (to ensure the accuracy of the filling, we suggest you to use 1 head in series.)
5, pump head model, according to the existing pump head model added.
Pump head introductionCR peristaltic pump head YZ2515X with rigidity and structure are more excellent. Its strong capabilities of baring high temperature and erosion, especially the excellent performance in the aspects of strong chemical resistance such as resisting organic solvent, effectively reducing the damage rate of the pump heads and the customers' cost in maintaining and reparing.
The pump head housing is available in white PESU and black PPS for a variety of applications.| Pump head | Flow range | Tube model | ID*Wall thickness | Speed |
| (ml/min) | (mm) | 100 rpm | 300 rpm | 600 rpm |
| YZ2515x | 0.007—1740 | 15# | 4.8*2.4 | 170ml | 510ml | 1020ml |
| 24# | 6.4*2.4 | 290ml | 870ml | 1740ml |
CR peristaltic pump silicon tube is the most commonly used material for peristaltic pump.
It provides the longest service life, and good chemical compatibility with aqueous and many organic solvents.
Its service life is about 150 hrs at 600 rpm and 825 hrs at 100 rpm.
It can usually be left running on experiments during weekends without much danger of rupture.
A fresh section of tubing should be pulled through the pump rollers before any running peristaltic pump is left unattended.
Silicone tubing can also be autoclaved a single time with a wet cycle without a significant reduction in its life.
High temperature and high pressure sterilization.