Max flow:4000ml/min Speed:0.1-350 rpm Application:—————— Speed control mode:Touch screen + membrane keypad Display mode:LCD screen suitable for multichannel、high precision and low pulsation filling Voltage:AC220V or AC110V Model:GS600 Product description: GSG600 multich......
GS600/LP25-6 filling system ,with max flow 4 L/min for each head . suitable for high precision and low pulsation filling .
Parameter
| Model | GS600/LP25-6 | Display Mode | 5 inch LCD screen |
| Speed Range | 0.1-350 rpm | Control Method | Touch screen |
| Filling Accuracy | <±0.5% | External control | start &stop |
| Flow Resolution | 0.01ml | Environment Temperature | 0-40℃ |
| Time resolution | 0.1s | Relatively Humidity | <80% |
| filling volume range | 0.001-9999.999ml | Power consumption | Each driver<50w |
| Filling time range | 0.3-9999.99s | Power supply | AC220V or AC110V |
| Pause Time range | 0.3-9999.99s | Motor Type | Stepper motor |
| Suction Angle | 0-360 ° | IP Rating | IP31 |
CR peristaltic pump filling system are based on bulk filling production requirment . which can meet production line with Conveyor belts, photoelectric switches, sensors, etc.
*Accurate angle control technology for high precision filling.
*Color touch screen friendly interface dynamic displaying working state default parameters and system configuration at the same time.
*Intelligent calibration function.
*Online calibration function enables the intelligent calibration for the filling quantity before production.
*Guarantee the filling precision and increase your working efficiency.
*Online fine tuning function convenient to calibrate or fine tuning the filling units during the productions to avoid any error in case the fatigue or elasticity decreased of the tubing.
*It is available for expanding the filling units from one controller freely.
*Can save 12 sets of common filling modes to save time and increase the work efficiency.
*Stop automatically once there was no container for the fluid to avoid any error during the operations.Advantage of CR peristsaltic pump.
CR Peristaltic pump are easy to maintenance
replaceable tubes allow you to switch from one liquid to another in the shortest amount of time.
No need to rinse and disassemble after the flushable product, you only need to replace the peristaltic pump tubing
CR Peristaltic pump with high precisio
The calibration function can ensure the filling accuracy for each dose .The suckback function prevents liquid (reverse): in the dispense mode, after the end of the direct cycle, the return stroke is initiated to prevent the liquid from flowing out of the pump tube during the stop.
CR peristaltic pump are non-pollution: the fluid only contacts the pump tube and does not touch the pump body;
CR Peristaltic pump is Versatility
CR peristaltic pump can be used with a variety of products and can be used in a variety of industries.
CR peristasltic pump are easy to work
After the power is turned off and on, the control system maintains the current settings (pump head tubing model and other parameter ).
CR peristaltic pump with good sealing: It has good self-priming ability and can be idling to prevent backflow.
CR peristaltic pump with Low shear: ideal for conveying shear sensitive, aggressive fluids
++++++++++++++++++++++++++
For different customer’s requirement .now for the Ultra filling system GS600 series we have 2 programme .
| Programme | Model | Difference 1 | Difference 2 |
| Programme 1 | T | The same filling dose for multiple channels is only required to be set once in the touch screen panel (eg 4 channels only need to set 1 time) | Different filling channels cannot set different filling doses |
| Programme 2 | F | Multiple channels of the same filling dose need to be set multiple times (eg 4 channels need to be set 4 times) | Different filling channels can be set with different filling doses (eg channel 1: 5ml /channel 2 :10ml /channel 3: 15ml/ channel 4: 20ml ....) |
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
F is for different volume setting for each pump driver .
(different filling volume/filling time/pause time . copy number should set the same numbers ) .
Interface as below :

Model Guide :
| Model | Dimension(mm) | N. W (KG) | Speed (rpm) | Flow range(ml/min) For each head | Suitable tube model |
| GS600(4F)1*YZ1515x | 916*316*198 | 18.5 | 0.1-600 | 0.007-2280 | 13# 14# 16# 19# 25# 17# 18# |
| GS600(4F)1*YZ2515x | 916*316*198 | 18.5 | 0.1-600 | 0.17-1740 | 15# 24# |
| GS600(4F)1*KZ25 | 956*354*198 | 25 | 0.1-600 | 10-6000 | 15# 24# 35# 36# |
| GS600(4F)1*LP25-6 | 1120*389*198 | 32 | 0.1- 350 | 0.08-4500 | 2.4*2.4 3.6*2.4 15# 24# 35# 36# |
| GS600(4F)1*YZ35-13 | 1181*413*278 | 50 | 0.1-600 | 1.3-12000 | 73# 82# |
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
T is for same volume setting for each pump driver .
(same filling volume/filling time/pause time/copy numbers )
Interface as below :

T programme with same volume setting for each driver:
| Model | Dimension(mm) | N. W (KG) | Speed (rpm) | Flow range(ml/min) For each head | Suitable tube model |
| GS600(4T)1*YZ1515x | 916*316*198 | 18.5 | 0.1-600 | 0.007-2280 | 13# 14# 16# 19# 25# 17# 18# |
| GS600(4T)1*YZ2515x | 916*316*198 | 18.5 | 0.1-600 | 0.17-1740 | 15# 24# |
| GS600(4T)1*KZ25 | 956*354*198 | 25 | 0.1-600 | 10-6000 | 15# 24# 35# 36# |
| GS600(4T)1*LP25-6 | 1120*389*198 | 32 | 0.1- 350 | 0.08-4500 | 2.4*2.4 3.6*2.4 15# 24# 35# 36# |
| GS600(4T)1*YZ35-13 | 1181*413*278 | 50 | 0.1-600 | 1.3-12000 | 73# 82# |
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Detailed explanation :
1, the drive specifications are distinguished by drivers
2, the number of drives defaults to 4. 2/3/5/6 Acceptable customization. (customization time about 10-20 work days )
3, T is for same volume setting for each driver . F is for different volume setting for each driver .
4,1* represents the number of pump heads per drive cascade, default is 1* (to ensure the accuracy of the filling, we suggest you to use 1 head in series.)
5, pump head model, according to the existing pump head model added.
| pump head | tube model | ID*OD(mm) | max speed (rpm) | Max Flow (ml/min ) |
| LP25-6 | 2.4*2.4 | 2.4*7.2 | 350 | 420 |
| 3.2*2.4 | 3.2*8 | 350 | 720 |
| 15# | 4.8*9.6 | 350 | 1680 |
| 24# | 6.4*11.2 | 350 | 2650 |
| 35# | 7.9*12.7 | 350 | 3300 |
| 36# | 9.6*14.4 | 350 | 4000 |
For the filling volume below 2 ml . we suggest the tube 2.4*2.4
For the filling volume between 2- 5ml .we suggest the tube 3.6*2.4
For the filling volume between 5- 20ml , we suggest the tube 15#
For the filling volume between 20-50 ml .we suggest the tube 24#
For the filling volume between 50-100 ml ,we suggest the tube 35#
For the filling volume between 100-500 ml. we suggest the tube 36#
Noted : This recommendation is for reference only, and the actual delivery configuration is subject to the recommendation of the salesperson.
LP25-6 easy load peristaltic pump head is our company aims at filling requirements of high precision users and on the basis of the original equipment to newly developed production . a kind of low pulsation and high precision special peristaltic pump head after widely soliciting the views of users. It is suitable for high precision and medium flow filling.
The pump head is of all metal structure, high mechanical strength and the shape adopts streamlined design, sturdy and beautiful, and easy to install. The two group of 304 stainless steel roller design with phase difference complementary can make fluid peaks and troughs complement each other to effectively reduce the fluctuation of the fluid and can be installed with double “Y" hose. And the flow and hose pressure is higher than the ordinary pump head.
The pump head adopts the humanized design that the pressure can be adjusted fine, which ensures the transmission and filling accuracy of the fluid more effectively.
The pump head shell adopts Aluminum Alloy material, anodized treatment, fine workmanship and it have the advantages of light weight, small vibration, low noise, good stability, waterproof, dust proof, anti-corrosion, high temperature resistance and long service life. This greatly reduces maintenance and repair costs in routine
++++++++++++++++++++++++++
CR peristaltic pump Ultra Filling system GS600 series with 5-inch industrial-grade true color LCD display and control. Smarter and more friendly. All working data can be easily set on the panel.
The peristaltic pump Ultra Fill system can store up to 12 filling settings data for different filling volumes.
Features :
With panel lock function to avoid erroneous operation.
With online fine-tuning, it quickly reduces fill errors.
With calibration function to ensure the high precision of the filling.
With full speed capability to quickly replenish and empty pipes.
With direction reversal, you can easily change direction.
It has a bottle-stopping function and can be used with the production line.
With external control function, it can be used together with the conveying sensor.
The peristaltic pump Ultra Filling system GS600 series also accepts custom program customization and channel number customization.