，-
E-mail
ishan@ishan.com.cn
- Phone
-
Address
No.852 Qingfeng south Road (South) Tongxiang City
Product Categories
- Air conditioning cooler series
- Water coolers series
- Oil cooler series
- Special spindle and hydraulic
- Special cutting fluid
- Oil coolers E series
- Heat pipe heat exchanger series
- Patio
- Wall hanging
- Wind coolers series
- Consumable Accessories
- SX-1Z Series
- SX-2Z Series
- SX-2T Series
- SX-2 Series
- SX-3 Series
- SX-4 Series
- Farming mechanical lubricating device
- YLS-Z electric lubrication system
- YME manual hydraulic system
- YLE electric hydraulic system
- YGP-A pneumatic lubrication system
- Hydraulic station
- YLS hydraulic station
- YLD hydraulic station
- YLB hydraulic station
- SST - B2 Series
- Oil mist lubrication system
- Oil mist distributor
- Oil mist injection machine
- Dilute oil volumetric lubrication system
- Dilute oil volume distributor
- Dilute oil volume injection machine
- Accessories class
- Tubing
- Pressure meter class
- Filter class
- Straight through oil distributor
- Pressure switch class
- Motor pump
- Joint
- Dilute oil resistance lubricating system
- Oil resistant distributor
- Oil resistant oil injection machine
- Butter volumetric lubrication system
- Oil volume oil injection machine
- Butter volume distributor
- Butter progressive lubrication system
- Butter progressive distributor
- Butter progressive oil injection machine
- Bus chassis & Construction machinery
- System diagram
- Grease distributor
- Grease injection machine
- Fittings
Zhejiang Sheng Xiang Machinery Co., Ltd.Free·1YRS
DP type progressive distributor
NegotiableUpdate on November 02
- Model
- Nature of the Manufacturer
- Other
- Product Category
- Butter progressive distributor
- Place of Origin
- City, Province
Overview
DP type progressive distributor
Product Details
Integrated composition method:
The minimum number of pieces in the integrated combination (that is the group) is 3 with up to 10 pieces. The first tablet (A) the middle slice (M) the non slice (E) and the most of the tablets were 8. If the distributor oil outlet to increase the displacement or lubrication points is odd the film can be pro oil supply port combination (throughout) can also be added excessively or three way pipe joint with two oil outlet into a mouth of oil. Remember that you can't block out the oil port at any time.
Remarks:
1. DP1 type 5 more than the front and back side of the support 4 plates below the front side of the support
2. The cycle indicator is available for proximity switch selection
3. 0.08cc flow hole can not be brought with a cycle indicator.
Appearance size diagram
Type and technical parameters:
Combination of shape and size:
| Product No. | The amount of spitting (cc/cy) | Nominal pressure | Starting pressure | Combinatorial number | Number of oil outlet | The oil inlet mouth lines | A set of oil lines | |||||
| (kgf/cm2) | (kgf/cm2) | ||||||||||||
| DP1 | 20209 | 0.08/0.16/0.23/0.32 | 160 | More than 10 | 3 ~ 10 | 6 ~ 20 | PS1/8 | M10*1.0 | |||||
| DP2 | 0.5/1.2/2.0 | G3/8 | PS1/4 | ||||||||||
Combination of shape and size:
| Type | Oil outlet number | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 |
| Combinatorial number | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | |
| DP1 | H (mm) | 48 | 64 | 80 | 96 | 112 | 128 | 144 | 160 |
| DP2 | H (mm) | 75 | 100 | 125 | 150 | 175 | 200 | 225 | 250 |
Similar Product Recommend