，-
E-mail
ishan@ishan.com.cn
- Phone
-
Address
No.852 Qingfeng south Road (South) Tongxiang City
Product Categories
- Air conditioning cooler series
- Water coolers series
- Oil cooler series
- Special spindle and hydraulic
- Special cutting fluid
- Oil coolers E series
- Heat pipe heat exchanger series
- Patio
- Wall hanging
- Wind coolers series
- Consumable Accessories
- SX-1Z Series
- SX-2Z Series
- SX-2T Series
- SX-2 Series
- SX-3 Series
- SX-4 Series
- Farming mechanical lubricating device
- YLS-Z electric lubrication system
- YME manual hydraulic system
- YLE electric hydraulic system
- YGP-A pneumatic lubrication system
- Hydraulic station
- YLS hydraulic station
- YLD hydraulic station
- YLB hydraulic station
- SST - B2 Series
- Oil mist lubrication system
- Oil mist distributor
- Oil mist injection machine
- Dilute oil volumetric lubrication system
- Dilute oil volume distributor
- Dilute oil volume injection machine
- Accessories class
- Tubing
- Pressure meter class
- Filter class
- Straight through oil distributor
- Pressure switch class
- Motor pump
- Joint
- Dilute oil resistance lubricating system
- Oil resistant distributor
- Oil resistant oil injection machine
- Butter volumetric lubrication system
- Oil volume oil injection machine
- Butter volume distributor
- Butter progressive lubrication system
- Butter progressive distributor
- Butter progressive oil injection machine
- Bus chassis & Construction machinery
- System diagram
- Grease distributor
- Grease injection machine
- Fittings
Zhejiang Sheng Xiang Machinery Co., Ltd.Free·1YRS
DSM cone free
NegotiableUpdate on November 02
- Model
- DSM cone free
- Nature of the Manufacturer
- Other
- Product Category
- Oil resistant distributor
- Place of Origin
- City, Province
Overview
DSM cone free
Product Details
Effectiveness and characteristics:
1. The reverse valve can prevent the reflux of lubricating oil.
2, oil, oil, pressure, temperature and change.
3, low cost, good quality and low price.
1. It is suitable for low pressure lubrication system.
2 with the use of resistance type oil injection machine.
3. Use pressure: 2~20kgf/cm².
4.Oil viscosity (40 C): 20~500cSt.
5 Flow ratio: form each plus one number, and the flow rate is multiplied by multiple.
6 Weight: 11g.
Appearance size diagram
Type and technical parameters:
Type and technical parameters:
| Straight rod proportional joint | ||||||||
| IN | M8X1.0 | M8X1.0 | |||||||
| OUT | M8X1.0 | PT1/8 | |||||||
| Flow ratio | Flow form | DSM-M | DCM-M | ||||||
| 1 | 00 | DSM-00M | DCM-00M | ||||||
| 2 | 0 | DSM-0M | DCM-0M | ||||||
| 4 | 1 | DSM-1M | DCM-1M | ||||||
| 8 | 2 | DSM-2M | DCM-2M | ||||||
| 16 | 3 | DSM-3M | DCM-3M | ||||||
| 32 | 4 | DSM-4M | DCM-4M | ||||||
| 64 | 5 | DSM-5M | DCM-5M | ||||||
Similar Product Recommend