，-
E-mail
ishan@ishan.com.cn
- Phone
-
Address
No.852 Qingfeng south Road (South) Tongxiang City
Product Categories
- Air conditioning cooler series
- Water coolers series
- Oil cooler series
- Special spindle and hydraulic
- Special cutting fluid
- Oil coolers E series
- Heat pipe heat exchanger series
- Patio
- Wall hanging
- Wind coolers series
- Consumable Accessories
- SX-1Z Series
- SX-2Z Series
- SX-2T Series
- SX-2 Series
- SX-3 Series
- SX-4 Series
- Farming mechanical lubricating device
- YLS-Z electric lubrication system
- YME manual hydraulic system
- YLE electric hydraulic system
- YGP-A pneumatic lubrication system
- Hydraulic station
- YLS hydraulic station
- YLD hydraulic station
- YLB hydraulic station
- SST - B2 Series
- Oil mist lubrication system
- Oil mist distributor
- Oil mist injection machine
- Dilute oil volumetric lubrication system
- Dilute oil volume distributor
- Dilute oil volume injection machine
- Accessories class
- Tubing
- Pressure meter class
- Filter class
- Straight through oil distributor
- Pressure switch class
- Motor pump
- Joint
- Dilute oil resistance lubricating system
- Oil resistant distributor
- Oil resistant oil injection machine
- Butter volumetric lubrication system
- Oil volume oil injection machine
- Butter volume distributor
- Butter progressive lubrication system
- Butter progressive distributor
- Butter progressive oil injection machine
- Bus chassis & Construction machinery
- System diagram
- Grease distributor
- Grease injection machine
- Fittings
Zhejiang Sheng Xiang Machinery Co., Ltd.Free·1YRS
Copper tube aluminum tube nylon tube rubber tube
NegotiableUpdate on November 02
- Model
- P-CP、P-AP、P-NP、P-PP
- Nature of the Manufacturer
- Other
- Product Category
- Tubing
- Place of Origin
- City, Province
Overview
Copper tube aluminum tube nylon tube rubber tube
Product Details
Type and technical parameters:
Note: in the volumetric lubrication system it is recommended that no hose be used.
Standard wall thickness: PP and NP are 1.0mm; AP and CP are 0.8mm.
| Product | type | Product No. | Specifications | |||
| copper tube | P-CP | 30301 | Outer diameter of tube | Ø4 | Ø6 | Ø8 |
| Minimum bending radius | R20 | R30 | R50 | |||
| aluminum tube | P-AP | 30302 | Outer diameter of tube | Ø4 | Ø6 | Ø8 |
| Minimum bending radius | R20 | R40 | R40 | |||
| nylon tube | P-NP | 30304 | Outer diameter of tube | Ø4 | Ø6 | Ø8 |
| Minimum bending radius | R20 | R30 | R50 | |||
| rubber tube | P-PP | 30305 | Outer diameter of tube | Ø4 | Ø6 | Ø8 |
| Minimum bending radius | R20 | R40 | R40 | |||
Standard wall thickness: PP and NP are 1.0mm; AP and CP are 0.8mm.
Similar Product Recommend