JET pump

Product Features:

The combination of centrifugal pumps and injectors made ​​use of PPO plastic impeller high temperature materials, deformation and movement built-in thermal protection, normal use does not burn, the rotor shaft chrome, centrifugal pump is usually installed in the ground, injector installation at the pump inlet, its working principle is generally caused by a low pressure pressure fluid through the nozzle, suction centrifugal liquid to import, the centrifugal excluded. The pump can be 10m the following from the deep wells pumping, and will not appear motor overload problem.

Service Conditions:

1、the transmission fluid temperature is lower than water + 40 ℃;
2、PH value between 6.5-8.5;
3、the volume ratio of water containing solid impurities is not more than 0.1%, particle size greater than 0.2mm;
4、the power frequency is 50HZ, voltage single phase 220V, voltage fluctuation range of 0.9-1.1 times the rating.