IRG Single stage vertical / horizontal pipeline centrifugal pump

Product Features:

IRG single-stage vertical pipeline centrifugal pump series, is the scientific and technical personnel in the United Nations expert selection of domestic pump hydraulic model, using the IS-type centrifugal pump performance parameters, based on the general vertical pump designed ingenious combination, while according to temperature, different media types on the basis of the ISG derived for hot water, high temperature, corrosive chemical pump, oil pump, the series has a high efficiency, low noise, reliable performance advantages.

Main Application:

1, IRG-type single-stage single-suction vertical pipeline centrifugal pump for conveying water and other liquids with similar physical and chemical quality of water for industrial and urban water supply and drainage, high-rise building pressurized water, garden irrigation, fire booster , long-distance transportation, HVAC refrigeration cycle, bathroom, heating and water circulation and equipment for pressurized, temperature T ≤80 ℃.
2, IRG-type single-suction vertical centrifugal pump hot water pipes, GRG single suction vertical centrifugal pumps widely used in high temperature piping: energy, metallurgy, chemicals, textiles, paper, as well as hotels and other high-temperature hot water boilers and pressurized circulation urban heating system circulating pump, IRG type temperature T <120 ℃,="" grg="" type="" temperature=""><240 ℃.="">
3, IRG vertical pipeline chemical pump for conveying solid particles, corrosive liquid viscosity similar to water, suitable for petroleum, chemical, metallurgy, electric power, paper, food and pharmaceutical and synthetic fibers and other departments, the use of temperature is -20 ℃ ~ + 20 ℃.
4, YG-type single stage single suction vertical pipeline pump is used to transport gasoline, kerosene, diesel and other petroleum products are transported medium temperature of -20 ℃ ~ + 20 ℃.

Service Conditions:

1、suction pressure gauge ≤1.0MPa, or pump system maximum working pressure ≤1.6MPa, namely pump inlet pressure + pump head ≤1.6MPa, hydrostatic test pump pressure greater than 1.6MPa should be made ​​when ordering separately. In order to manufacture the pump flow section and a coupling portion using steel materials.
2、ambient temperature <40 ℃,="" relative="" humidity=""><95 ℃.="">
3、the transmission medium is not more than the volume content of solid particles in a unit volume of 0.1%, particle size <0.2mm.>
Note: If using a medium to small particles, when ordering, so that manufacturers use wear-resistant mechanical seal.