An air driven diaphragm pump moves fluid by the alternate and repeated back-and-forth movement (strokes) of two flexible membranes or diaphragms mounted on a common shaft (Figure 1).
Product Details
Summary:
An air driven diaphragm pump moves fluid by the alternate and repeated back-and-forth movement (strokes) of two flexible membranes or diaphragms mounted on a common shaft (Figure 1). Although diaphragm pumps can be driven directly, with the shaft connected directly to a motor, an air driven double diaphragm pump pump uses compressed air with a sophisticated distribution system directing the air alternately to two air chambers on the opposite sides of the diaphragms.
Figure 1 Operation of an air driven diaphragm pump diagram
Application:
• Corrosive chemical
• Volatile solvents
• Viscous,sticky fluids
• Shear-sensitive foodstuffs and pharma product
• Dirty water and abrasive slurry
• Smaller solids
• Creams,gels and oils
Advantages:
• Handel a wide variety of fluids with high solids content
The YONJOU QBK built-in air distribution system incorporates two moving parts: the air valve spool and the pilot spool, which also are the heart parts for the system. The pressurized air start ingress into one side hole of pilot spool and then trigger the air valve move. It directs pressurized air to one air chamber while exhausting the other. The air causes the main shaft/diaphragm assembly to shift to one side (discharging liquid on that side and pulling liquid in one other side). When the shaft reach to the end of the stroke, the diaphragm plate actuates the pilot spool. The air start ingress into other side hole of pilot spool then trigger the air valve to other side too.
Figure2 Air distribution system
Figure 3Generic representation of an air-operated double-diaphragm pump
NOTE: In the event of a power failure, the shut off valve should be closed, if the restarting of the pump is not desirable once power is regained.
■ How does a diaphragm pump work?
■ What is a diaphragm pump used for?
■ What is the difference of air-operated diaphragm pump and electrical diaphragm pump?
■ What is the difference of diaphragm pump and centrifugal pump?
■ How does a pneumatic pump work?
■ What is the advantages of diaphragm pump?
■ What the diaphragm pump parts and functions?
■ Can diaphragm water pumps run dry?
■ Can a diaphragm pump run continuously?
■ Does the diaphragm pump need electricity?
■ How long does a diaphragm pump last?
■ Can a diaphragm pump lift water?
■ How far can a diaphragm pump?
How does a diaphragm pump work?
Whenever we mention the diaphragm pump, someone will ask “How does an electric diaphragm pump work? Diaphragm pump working principle? air diaphragm pump how it works?"
The working principle of the diaphragm pump pneumatic is to drive the air distribution valve of the compressor input the diaphragm pump to drive the internal link shaft of the intermediate body internal internal in vitro of the diaphragm pump to drive the diaphragm pump film of the interval of the diaphragm pump. The volume -type reciprocating pump of the fluid. Among the two symmetrical working cavities of the pump, each with an elastic diaphragm each, the couplet forms two pieces of septum into one, compressed the air from the pump's inlet connector into The diaphragm drives the two septum synchronization exercises connected by the linked rod. At the same time, the gas in the other working cavity is discharged outside the pump from behind the diaphragm. The pneumatic diaphragm pump 2 inch is composed of two parts: air flow structure and liquid flow structure, which is completely isolated through the membranes on both sides.
Air supply pressure can work as only greater than two kilograms per square centimeter. Under the pressure of 5 to 8 kg, the high -pressure gas in the air valve room drives the rod axis to move left and right through the air flow dredging system. At the same time, the consumed low -pressure gas is quickly discharged through the exhaust port. Under the alternation of high and low -pressure gases on both sides, the connecting rod axis drives the left and right movements on both sides, so that the gas pressure in the volume cavity on both sides is alternately changed, thereby achieving the continuous inhalation and discharge of the liquid.
The gas distribution agency automatically introduces the air to another working cavity to promote the movement of the diaphragm in the opposite direction, which forms two synchronous movements of the two diaphragms. There are two unidirectional ball valves in each working cavity. The reciprocating movement of the diaphragm causes changes in the accumulation of the working cavity, forcing the two unidirectional ball valves to open and close, thereby continuously inhaling and discharge the liquid.
When the fluid pumps through the diaphragm, the soft secret closure and valve seats are opened and one level. And due to the soft sealing form of the core and valve seat, it can also be passed through some small particles.
What is a diaphragm pump used for?
“What is the purpose of a diaphragm pump?" “Where is a diaphragm pump best suited?" “ Where are diaphragm pumps used?" Many people often ask such questions, and the YONJOU PUMP will answer it for you.
The air-operated diaphragm pump is a volumetric pump based on compressed air as power and deformation, made of the reciprocity of the membrane. It works similarly to a piston pump. Due to the working principle of air-operated diaphragm pumps, the use of diaphragm pumps is mainly reflected in the following industries, which has a wide impact.
Chemical industry: acid, alkali, solvents, suspension, decentralized system.
Petrochemical industry: thick oil, oil, mud, sludge, etc.
Coating industry: resin, solvent, coloring agent, paint, etc.
Daily chemical industry: detergent, fragrance, emulsion, emulsion, hand cream, surfactant.
Metallurgical, casting and dyeing: metal pulp, hydroxide and carbonized paste, dust washing pulp, etc.
What is the difference of air-operated diaphragm pump and electrical diaphragm pump?
According to the drive mode of the diaphragm pump, we divide the pumps into electric diaphragm pumps and pneumatic diaphragm pumps, and then analyze them from multiple dimensions.
Air-Operated Diaphragm Pump
Electrical Diaphragm Pump
Way of working
Compressed air for power driving
Drive by the motor as a power source
Flow
The traffic is relatively large
The flow flow is relatively small
Regulation of traffic
can regulate the flow of the gas source by regulating the pressure of the gas source
Only when installing the inverter can the flow be adjusted
Degree of explosion -proof
Structure can be explosion -proof
If you want explosion -proof, you can only install explosion -proof motors.
Hold down
Exit support stroke pressure
Exit does not support sting pressure
Cost
Low cost, low price
High cost, high price (compared to more pneumatic)
What is the difference of diaphragm pump and centrifugal pump?
Diaphragm pump VS. Centrifugal pump
The working principle of the electric double diaphragm pump is to use the back -and -forth movement of the diaphragm to change the studio volume for inhalation and excretion of liquid.
The diaphragm pump can transport the medium without leakage. The structural design of the diaphragm pump is not sealed, and the medium is separated from the diaphragm from the atmosphere.
The centrifugal pump relies on the rotation of the impeller to make the water -centric movement.
The working principle of the centrifugal pump is to drive the impeller and water for the pump axis, run at high speed, and the water occurs at high speed. The water occurs to the outer edge of the impeller.
The obvious difference between the diaphragm pump and the centrifugal pump is that the working principles and structure are different. The diaphragm pump has a self -absorbing ability, while the centrifugal pump does not have self -suction ability. Therefore, the centrifugal pump needs to be used when used, and the diaphragm pump does not need. However, the noise of the centrifugal pump is smaller than that of the diaphragm pump. The diaphragm pump works in a pulsating manner. The driving method of the diaphragm pump is to compress the gas, and the operation of the centrifugal pump is a rotation movement.
How does a pneumatic pump work?
1. Compressed air entering through the filter, pushing the selection valve decrease, and then the gas enters the cylinder through the channel to promote the drop in the piston. Oil mouth.
2. When the plunger drops to the lower itinerary, select the valve to close, and prevent the compressed air from entering the cylinder body, and then rely on the spring in the cylinder to overcome the pressure pressure and promote the rise of the piston. Inhale the oil into the cavity, the gas is discharged from the muffler through the channel.
3. When the plunger rises to the upper stroke, select the valve to open again, compressing the air to push the plunger for oil discharge process.
4. In the absence of loads, the high -speed frequency of about 2,000 times per minute repeats the above 1 to 3 actions until the pressure and oil pressure are stable. When the pressure of the two reaches constant, the cycle of the pump will stop automatically. If the pressure of the oil pressure circuit is unexpectedly decreased, as long as the air supply pump is compressed for a long time, it will automatically operate until the oil pressure reaches constant.
What is the advantages of diaphragm pump?
The diaphragm pump has six advantages, such as long quality, reliable service life, noise floor, small vibration, small collision and fine workmanship. It can pump liquids that can be pumped, and it can also convey some unsuitable media. It has many advantages of conveying machinery such as self-priming pump, submersible pump, shielded pump, shielded pump, slurry pump and impurity pump.
1. The flow is spacious, the passing performance is good, and the diameter of large particles is allowed to reach 10 mm. When pumping mud and impurities, there is little wear on the pump;
2. The pneumatic one-way diaphragm pump does not need to be irrigated and diverted, the suction lift is up to 5 meters, the head is up to 70 meters, and the outlet pressure is ≧ 7bar
3. This kind of pump has no rotating parts, no shaft seal, diaphragm and other pumped media are completely separated from the moving parts and work piece medium of the pump, and the transported medium will not leak outward. Therefore, when pumping toxic, volatile or corrosive media, it will not cause environmental pollution and harm people;
4. The head and flow rate can be steplessly adjusted by the valve opening (the air pressure is adjusted between 1-7bar);
5. It can be submerged in the medium and can transport more viscous liquids (viscosity below 10,000 Pa·s);
6. No need to use electricity, reliable use in flammable and explosive places;
7. The pneumatic diaphragm pump has a simple structure and few wearing parts, the pump structure is simple, the installation and maintenance are convenient, and the medium transported by the pump will not contact the moving parts such as the gas distribution valve and the connecting rod, unlike other types of pumps due to the wear of rotors, pistons, gears, blades and other components and gradually decline in performance;
8. Easy to use, reliable work, start and stop simply open and close the gas valve, even if due to unexpected circumstances and long time without media operation or sudden shutdown of the pump will not be damaged, once overloaded, the pump will automatically stop, with self-protection performance, when the load returns to normal, and can automatically start operation;
9. The pneumatic diaphragm pump does not need to be lubricated with oil, even if it is idling, it has no effect on the pump, which is a major feature of the pump.
What the diaphragm pump parts and functions?
What is the name of each component of the diaphragm pump?Some users will not call them their names. Let's introduce it briefly below.
The working part of the diaphragm pump small is mainly composed of a crank link mechanism, plunger, liquid cylinder, diaphragm, pump body, inhalation valve and discharge valve.
Diaphragm
The film requires smooth, no scratches, and elasticity should meet the requirements.
2. Control valve
Adjust the strictness of the pressure valve core and the valve seat, and test with kerosene leakage for 5 minutes. It is advisable to not exceed a drop of leakage. According to the damage, mechanical processing can be taken accordingly, and the strike valve or grinding method can be taken accordingly. You need to replace it in time when you cannot repair it.
Can diaphragm water pumps run dry?
Most people may asked can a diaphragm pump pump air? Or can the diaphragm pump run idle? The diaphragm pump can run dry, but it cannot be idled for a long time, which will have an impact on the diaphragm life of the diaphragm pump. Add a pressure regulator to the air line to control the start and stop of the air-operated diaphragm pump. Engineering plastic pneumatic diaphragm pump can be divided into QBY type engineering plastic pneumatic diaphragm pump and QBK engineering plastic pneumatic diaphragm pump.
Whether the diaphragm pump can idle, under normal circumstances, the pneumatic diaphragm pump is not allowed to idle in use, which will indirectly affect the service life of the diaphragm. Diaphragm pumps can be idled under special circumstances, but not for too long. The pneumatic diaphragm pump power source is special, unlike the traditional water pump relying on the motor, the diaphragm pump uses compressed air drive, the diaphragm pump idling will not heat up and damage the pump body, very durable. Plastic pneumatic diaphragm pump without shaft seal, with good leakage performance, can transport volatile, toxic and harmful liquid medium, very safe during transportation, in the harsh environment can also dive into the medium to work directly, with a protective device, under abnormal working conditions will make the diaphragm pump idle, idling or short-term shutdown will not damage the pump body, and when it returns to normal, the operation and use is also very sensitive.
Can a diaphragm pump run continuously?
Can the diaphragm pump run for a long time? The diaphragm pump is divided into two types: electric diaphragm pump and pneumatic diaphragm pump. Among them, the pump does not generate heat during operation, so it can run for a long time without any hidden dangers. It can also run for a long time under the premise, but it should not be unveiled like a pump.
Can the diaphragm pump run for a long time? Simply speaking, it can run for a long time, especially the pneumatic diaphragm pump can be used without risks and hidden dangers for a long time. The pump is damaged, which is more convenient and durable to use, while the electric diaphragm pump must keep attention when running for a long time to avoid the medium break or the flow is too low. Compared with the gas pump The source of force is caused by different sources.
After knowing that the diaphragm pump can run for a long time, the user only needs to confirm the electrical diaphragm pump or the pneumatic diaphragm pump according to the needs of the working conditions. Different sources of force lead to differences in actual performance parameters. Under normal circumstances, it is recommended to choose pneumatic diaphragm pumps when it is difficult to connect to the power supply, or to transport flammable and explosive liquid, which will be safer and reliable. If the transportation process has higher requirements for performance parameters and stability, At the same time, the transport medium is not harmful, it is recommended to choose an electric septum pump.
In addition, users need to be clear that the diaphragm pump is used as a new type of pump, which supports plastic, aluminum alloy, cast iron, stainless steel and other materials on the material material material. After the user only needs to clarify the required parameters and the temperature changes of the medium, it can quickly match the model. YONJOU PUMP can provide comprehensive and perfect custom services.
Does the diaphragm pump need electricity?
Does the pneumatic diaphragm pump need electricity, the pneumatic diaphragm pump can work normally without using electric drive. And after grounding, it can effectively prevent static sparks.
(1) The engineering plastic pneumatic diaphragm pump can work normally without using electricity, and the operation after grounding is very safe, which can effectively prevent electrostatic sparks.
(2) Stainless steel pneumatic diaphragm pump does not need electricity as a power source, so it will not produce static sparks, and can be grounded while preventing spark static electricity.
(3) The pneumatic pump does not need electricity, and needs to have a certain amount of compressed air as the power source, which can effectively avoid the potential safety hazards caused by the use of electricity.
(4) The aluminum alloy pneumatic diaphragm pump does not need electricity, only needs a large area of wires, and the grounding screw on the diaphragm pump can be reliably grounded.
(5) The cast iron pneumatic diaphragm pump does not require current as a power source, and can prevent static sparks after safe grounding, and can pass through the medium containing solid particles. Through excellent performance, high lift, so no electricity is required.
(6) The pneumatic diaphragm pump needs compressed air as the power source, which can pass through the corrosion-resistant medium, volatile, explosive and flammable, high viscosity liquid, strong and fast suction. Through good performance, you can save a lot of manpower, if there is no pneumatic diaphragm pump, diaphragm pump manufacturers recommend using electric diaphragm pump.
How long does a diaphragm pump last?
The most important part of the obstacle pump is the diaphragm. Generally, the service life of the diaphragm is about 20 million times. Based on 8 hours of work per day, the service life is about 6-8 months.
The service life of the qualified entire pump is more than 5 years, and the overall service life of the metal pump is longer than that of plastic. Among them, the use of stainless steel materials is the longest. Because of the relatively short oxidation and rust, the steel casting steel will be relatively short.
Can a diaphragm pump lift water?
Can diaphragm pumps pump water? Before answering this question, let's first understand what is the difference between the diaphragm pump and the pump?
The pneumatic diaphragm pump is a kind of compressed air. Its working principle is similar to the plunger pump. The pneumatic diaphragm pump in the spray paint and ceramic industry has a absolute dominant position.
The pump is a machine that transports liquid or makes liquid supercharged. It is mainly used to transport liquids including water, oil, acid -base fluid, emulsification liquid, suspension and liquid metal.
The two working principles and structures of their two are different. The most significant difference should include the ability of centrifugal pumps without self -absorbing ability, and the diaphragm pump is there. Therefore, the centrifugal pump must be diversion. It can be imagined that the diaphragm pump is pulited; the driving method of the diaphragm pump is compressed gas, and the centrifugal pump work is that most of the motor and diesel engine can be used.
The working principle of the diaphragm pump is different from the water pump, so the diaphragm pump cannot be used as a pump
How far can a diaphragm pump?
For the problem of how many meters are there in the septum pump, it is not so clear, because we all know that the same diaphragm pump will be different in the hands of different manufacturers, which will be different in model specifications and performance parameters. After all The manufacturer's production process is different, but what we can know is that even if these parameters are different, the use of Z at the end of Z is the same. And in order to allow everyone to know how many meters of raising of the diaphragm pump.
QBY pneumatic diaphragm pump: a new type of transport machinery, mainly uses compressed air as a source of power. It can work smoothly under various harsh conditions, because there is no need to use electricity, it is even more reassuring in flammable and explosive places. For various corrosive liquids, liquids with particles, high viscosity, volatile, flammable,, flammable, flammable, and The toxic liquid can be drawn with all the light.
DBY electric diaphragm pump: This series of pumps mainly made breakthrough progress in the material of the diaphragm, so it can replace some centrifugal pumps and screw pumps. It can effectively play its performance in various low -pressure occasions, and multiple septum can be selected as needed. The characteristic is that there is no need to pour water, and the self -priming ability is strong.
Performance parameters are optional: traffic range: 0-20 (m3/h), raising range: 30 (m), power range: 0.55-5.5 (kW), caliber range: 10-100 (mm).
From the above content, we can know how many meters of the raising journey of the diaphragm pump, but because the schedule marked on the pump nameplate is theoretically, it is not actually possible to reach the journey. With less, we take the intermediate value in the middle. It can be obtained that the pneumatic diaphragm pump is generally about 50 meters, and the raising of the electric diaphragm pump is generally about 20 meters.
We are a professional air operated double diaphragm pump manufacturers in China. We can provide the best air operated double diaphragm pump for sales and competitive price. If you are looking for air operated pump/chemical diaphragm pump supplier, we are a good choice. Contact us to get the 1inch 2inch 3inch 4inch air operated double diaphragm pump price, stainless steel air operated double diaphragm pump, etc..
Hot Tags: diaphragm air pump, China, manufacturers, suppliers, factory, price, for sale, Progressive Cavity Pump, Multistage Pump, food grade gear pump, Electric Diaphragm Pump, FRP Pump, Thermal Oil Circulation Pump