Welcome Customer !

Membership

Zhejiang yonjou Technology Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 泵

Xwboo>Products

Zhejiang yonjou Technology Co., Ltd.Free·1YRS

  • E-mail

    yqbf@yonjou.com

  • Phone

    0577-67981666,67312766,67315766

  • Address

    No. 780 Yongjia Oubei road of Wenzhou city Zhejiang Province

Contact Now

LQZE Petro-chemical process pump

Model
Nature of the Manufacturer
Other
Product Category
Industries Served
Place of Origin
City, Province
Overview
LQZE Petro-chemical process pump
Product Details
  • LQZE pumps designed to API 610-OH2 are used in heavy duty industries like Petroleum, Petrochemical, Energy, etc. for transfer of low and high density petroleum products, petrochemicals, chemicals, high temperature liquids, hot water and condensate.
    API610 11th Ed.-OH2 centerline-mounted design providing high reliability, temperature endurance and life.Horizontal, single stage, radially split voluts casing type, end suction centrifugal pumps with closed impeller.Due to the back-pull-out design, the complete bearing assembly including impeller and shaft can be dismantled without removing the volute casing from the piping system.All impellers are dynamically balanced according to ISO 1940 class 2.5Axial thrust is balanced in closed impeller by wear ring I balance hole system.Heavy duty shaft not in contact with the medium handled (dry shaft).For casing sealing, confined gaskets are used to prevent blow-out under pressure.Pump shaft Is supported by oil lubricated, long-life, heavy duty rolling bearings. On the coupling side two angular contact ball bearings and on impeller side cylindrical roller bearing or ball bearing Is used.Bearing isolators to prevent leakage into the bearings.High capacity oil reservoir decreases oil temperature thus increases bearing life.
    Cooling chamber in the bearing bracket for oil cooling.
    As per application requirements, mechanical seals according to API 682
    Direction of rotation is clockwise viewed from driver end.

  • Technical parameters
    Caliber:25~400 mm
    Capacity:≤2400 m3/h
    Head: ≤300 m
    Design pressure: ≤5.0Mpa
    Design temperature: ≤ -80℃~+450℃