Product overview
IS single stage single suction centrifugal pump (axial suction), is energy saving pump national joint design, it is to update the type BA type, B type and other single stage centrifugal water pump. Advantages are: reasonable layout of full hydraulic performance, wide range of users select, convenient maintenance; efficiency and suction lift to reach the average international advanced level. This type of pump is suitable for Industry and city water supply, drainage, but also can be used for agricultural drainage and irrigation and for the transport of water and physical and chemical properties similar to water and other liquids used, high temperature of 80 DEG C.
Product features
The performance and size of the 1, type IS department in accordance with the provisions of the international standard ISO2858 design, mainly by the pump body, pump cover, impeller, shaft, shaft sleeve, sealing ring and the suspension bearing not see etc..
Pump body and pump 2, IS type cover part, from the back surface of the impeller at the subdivision, that is usually said after the door structure. Its advantages are convenient maintenance, inspection without moving the pump body, the suction pipe, a discharge line and motor, just remove the lengthened coupling between connecting piece, you can exit the rotor parts repair.
3, pump shell (i.e., pump body and cover form pump studio). Impeller, shaft and rolling bearing for the rotor pump. Suspension bearing components supporting the rotor of pump, rolling bearing the radial force and axial force of pump.
4, in order to balance the axial force of pump impeller pump, most of the front and rear is provided with a sealing ring, and is provided with a balance hole on the rear cover board of impeller, pump axial force due to some small, the back surface of the impeller is not provided with a sealing rings and balance holes.
5, the axial pump seal ring is composed of a packing gland, packing ring and packing etc., to prevent the intake or large water leakage. The impeller of the pump such as balance, cavity and impeller is provided with a suction inlet is communicated with the soft packing, such as the impeller inlet liquid in the vacuum state, then easily along the shaft surface air inlet, so the packing ring through the pump cover holes is arranged in the packing chamber, the pump chamber pressure water will lead to a packing ring seal. The impeller of the pump without balance hole due to the back surface of the impeller liquid pressure greater than atmospheric pressure, so there is no problem of air leakage, and therefore can not filling ring.
6, to avoid wear of shaft in shaft, through the packing chamber is provided with a shaft sleeve protection part. O type sealing ring is quasi between the shaft sleeve and the shaft, to prevent the intake or leakage along the mating surface.
The transmission mode of 7, pump is connected with the motor by lengthening the elastic coupling, the direction of rotation of the pump, viewed from the driving end, clockwise rotation.
For example: IS80-65-160A
IS- single stage single suction centrifugal pump
80- inlet diameter (mm)
65- outlet diameter (mm)
160- impeller diameter (mm)
A- first cutting impeller
Model | Flow Q | Lift (m) | Speed (r/min) | Power (kw) | Efficiency (%) | NPSH (m) |
(m3/h) | (L/S) | Shaft power | Motor power |
IS50-32-125 | 7.5 12.5 15 | 2.08 3.47 4.17 | 22 20 18.5 | 2900 | 0.96 1.13 1.26 | 2.2 | 47 60 60 | 2.0 2.0 2.5 |
IS50-32-125A | 11.2 | 3.1 | 16 | 2900 | 0.84 | 1.1 | 58 | 2.0 |
IS50-32-160 | 7.5 12.5 15 | 2.08 3.47 4.17 | 34.3 32 9.6 | 2900 | 1.59 2.02 2.16 | 3 | 44 54 56 | 2.0 2.0 2.5 |
IS50-32-160A | 11.7 | 3.3 | 28 | 2900 | 1.71 | 2.2 | 53 | 2.0 |
IS50-32-160B | 10.8 | 3 | 24 | 2900 | 1.41 | 2.2 | 50 | 2.0 |
IS50-32-200 | 7.5 12.5 15 | 2.08 3.47 4.17 | 52.5 50 48 | 2900 | 2.82 3.54 3.95 | 5.5 | 38 48 51 | 2.0 2.0 2.5 |
IS50-32-200A | 11.7 | 3.3 | 44 | 2900 | 3.16 | 4 | 45 | 2.0 |
IS50-32-200B | 10.8 | 3 | 38 | 2900 | 2.60 | 3 | 43 | 2.0 |
IS50-32-250 | 7.5 12.5 15 | 2.08 3.47 4.17 | 82 80 78.5 | 2900 | 5.87 7.16 7.83 | 11 | 28.5 38 41 | 2.0 2.0 2.5 |
IS50-32-250A | 11.7 | 3.3 | 70 | 2900 | 6.47 | 7.5 | 35 | 2.0 |
IS50-32-250B | 10.8 | 3 | 60 | 2900 | 5.51 | 7.5 | 32 | 2.0 |
IS65-50-125 | 15 25 30 | 4.17 6.94 8.33 | 21.8 20 18.5 | 2900 | 1.54 1.97 2.22 | 3 | 58 69 68 | 2.0 2.5 3.0 |
IS65-50-125A | 22.4 | 6.2 | 16 | 2900 | 1.47 | 2.2 | 66 | 2.0 |
IS65-50-160 | 15 25 30 | 4.17 6.94 8.33 | 35 32 30 | 2900 | 2.65 3.35 3.71 | 5.5 | 54 65 66 | 2.0 2.0 2.5 |
IS65-50-160A | 23.4 | 6.5 | 28 | 2900 | 2.83 | 4 | 63 | 2.0 |
IS65-50-160B | 21.7 | 6 | 24 | 2900 | 2.35 | 4 | 60 | 2.0 |
IS65-40-200 | 15 25 30 | 4..17 6.94 8.33 | 53 50 47 | 2900 | 4.42 5.67 6.29 | 7.5 | 49 60 61 | 2.0 2.0 2.5 |
IS65-40-200A | 23.4 | 6.5 | 44 | 2900 | 4.92 | 5.5 | 57 | 2.0 |
IS65-40-200B | 21.8 | 6.1 | 38 | 2900 | 4.13 | 5.5 | 55 | 2.0 |
IS65-40-250 | 15 25 30 | 4.17 6.94 8.33 | 82 80 78 | 2900 | 9.05 10.89 12.02 | 15 | 37 50 53 | 2.0 2.0 2.5 |
IS65-40-250A | 23.4 | 6.5 | 70 | 2900 | 9.10 | 11 | 49 | 2.0 |
IS65-40-250B | 21.7 | 6 | 60 | 2900 | 7.51 | 11 | 47 | 2.0 |
IS65-40-315 | 15 25 30 | 4.17 6.94 8.33 | 127 125 123 | 2900 | 18.5 21.3 22.8 | 30 | 28 40 44 | 2.5 2.5 3.0 |
IS65-40-315A | 23.9 | 6.6 | 114 | 2900 | 19.41 | 22 | 38 | 2.5 |
IS65-40-315B | 22.7 | 6.3 | 103 | 2900 | 17.19 | 22 | 37 | 2.5 |
Model | Flow Q | Lift (m) | Speed (r/min) | Power(kw) | Efficiency (%) | NPSH (m) |
(m3/h) | (L/S) | Shaft power | Motor power |
IS65-40-315C | 21.4 | 5.9 | 92 | 2900 | 15.20 | 18.5 | 35 | 2.5 |
IS80-65-125 | 30 50 60 | 8.33 13.9 16.7 | 22.5 20 18 | 2900 | 2.87 3.63 3.98 | 5.5 | 64 75 74 | 3.0 3.0 3.5 |
IS80-65-125A | 44.7 | 12.4 | 16 | 2900 | 2.66 | 3 | 73 | 3.0 |
IS80-65-160 | 30 50 60 | 8.33 13.9 16.7 | 36 32 29 | 2900 | 4.82 5.97 6.59 | 7.5 | 61 73 72 | 2.5 2.5 3.0 |
IS80-65-160A | 46.8 | 13 | 28 | 2900 | 5.10 | 5.5 | 70 | 2.5 |
IS80-65-160B | 43.3 | 12 | 24 | 2900 | 4.15 | 5.5 | 68 | 2.5 |
IS80-50-200 | 30 50 60 | 8.33 13.9 16.7 | 55 50 47 | 2900 | 7.87 9.87 10.8 | 15 | 55 69 71 | 2.5 2.5 3.0 |
IS80-50-200A | 46.8 | 13 | 44 | 2900 | 8.37 | 11 | 67 | 2.5 |
IS80-50-200B | 43.6 | 12.1 | 38 | 2900 | 6.83 | 11 | 66 | 2.5 |
IS80-50-250 | 30 50 60 | 8.33 13.9 16.7 | 84 80 75 | 2900 | 13.2 17.3 19.2 | 22 | 52 63 64 | 2.5 2.5 3.0 |
IS80-50-250A | 46.8 | 13 | 70 | 2900 | 14.87 | 18.5 | 60 | 2.5 |
IS80-50-250B | 43.3 | 13 | 60 | 2900 | 13.18 | 15 | 58 | 2.5 |
IS80-50-315 | 30 50 60 | 8.33 13.9 16.7 | 128 125 123 | 2900 | 25.5 31.5 35.3 | 37 | 41 54 57 | 2.5 2.5 3.0 |
IS80-50-315A | 47.8 | 13.3 | 114 | 2900 | 29.15 | 37 | 51 | 2.5 |
IS80-50-315B | 45.4 | 12.6 | 103 | 2900 | 25.97 | 30 | 49 | 2.5 |
IS80-50-315C | 42.9 | 11.9 | 92 | 2900 | 22.84 | 30 | 47 | 2.5 |
IS100-80-125 | 60 100 120 | 16.7 27.8 33.3 | 24 20 16.5 | 2900 | 5.86 7.0 7.28 | 11 | 67 78 74 | 4.0 4.5 5.0 |
IS100-80-125A | 89.4 | 24.8 | 16 | 2900 | 5.19 | 7.5 | 75 | 4.5 |
IS100-80-160 | 60 100 120 | 16.7 27.8 33.3 | 36 32 28 | 2900 | 8.42 11.2 12.2 | 15 | 70 78 75 | 3.5 4.0 5.0 |
IS100-80-160A | 93.5 | 26 | 28 | 2900 | 9.52 | 11 | 75 | 4.0 |
IS100-80-160B | 86.6 | 24.1 | 24 | 2900 | 7.77 | 11 | 73 | 4.0 |
IS100-65-200 | 60 100 120 | 16.7 27.8 33.3 | 54 50 47 | 2900 | 13.6 17.9 19.9 | 22 | 65 76 77 | 3.0 3.6 4.8 |
IS100-65-200A | 93.8 | 26.1 | 44 | 2900 | 15.01 | 18.5 | 75 | 3.6 |
IS100-65-200B | 87.2 | 24.2 | 38 | 2900 | 12.52 | 15 | 72 | 3.6 |
IS100-65-250 | 60 100 120 | 16.7 27.8 33.3 | 87 80 74.5 | 2900 | 23.4 30.3 33.3 | 37 | 61 72 73 | 3.5 3.8 4.8 |
Model | Flow Q | Lift (m) | Speed (r/min) | Power (kw) | Efficiency(%) | NPSH(m) |
(m3/h) | (L/S) | Shaft power | Motor power |
IS100-65-250A | 93.5 | 26 | 70 | 2900 | 25.49 | 30 | 70 | 3.8 |
IS100-65-250B | 86.6 | 24.1 | 60 | 2900 | 20.85 | 30 | 68 | 3.8 |
IS100-65-315 | 60 100 120 | 16.7 27.8 33.3 | 133 125 118 | 2900 | 39.6 51.6 57.5 | 75 | 55 66 67 | 3.0 3.6 4.2 |
IS100-65-315A | 95.5 | 26.5 | 114 | 2900 | 46.28 | 55 | 64 | 3.6 |
IS100-65-315B | 90.8 | 25.2 | 103 | 2900 | 41.04 | 45 | 62 | 3.6 |
IS100-65-315C | 84.8 | 23.8 | 92 | 2900 | 35.78 | 45 | 60 | 3.6 |
IS125-100-200 | 120 200 240 | 33.3 55.5 66.7 | 57.5 50 44.5 | 2900 | 28.0 33.6 36.4 | 45 | 67 81 80 | 4.5 4.5 5.0 |
IS125-100-200A | 187 | 52 | 44 | 2900 | 28.76 | 37 | 78 | 4.5 |
IS125-100-200B | 174.4 | 48.4 | 38 | 2900 | 23.73 | 30 | 76 | 4.5 |
IS125-100-250 | 120 200 240 | 33.3 55.6 66.7 | 87 80 72 | 2900 | 43.0 55.9 62.8 | 75 | 66 78 75 | 3.8 4.2 5.0 |
IS125-100-250A | 187 | 52 | 70 | 2900 | 46.96 | 55 | 76 | 4.2 |
IS125-100-250B | 173.2 | 48.1 | 60 | 2900 | 38.24 | 45 | 74 | 4.2 |
IS125-100-315 | 120 200 240 | 33.3 55.6 66.7 | 132.5 125 120 | 2900 | 72.1 90.8 101.9 | 110 | 60 75 77 | 4.0 4.5 5.0 |
IS125-100-315A | 191 | 53.1 | 114 | 2900 | 81.30 | 90 | 73 | 4.5 |
IS125-100-315B | 181.5 | 50.4 | 103 | 2900 | 71.68 | 90 | 71 | 4.5 |
IS125-100-315C | 171.6 | 47.7 | 92 | 2900 | 62.35 | 75 | 69 | 4.5 |
IS50-32-125 | 3.75 6.3 7.5 | 1.04 1.74 2.08 | 5.4 5.0 4.6 | 1450 | 0.13 0.16 0.17 | 0.55 | 43 54 55 | 2.0 2.0 2.5 |
IS50-32-125A | 5.6 | 1.6 | 4 | 1450 | 0.12 | 0.55 | 53 | 2.0 |
IS50-32-160 | 3.75 6.3 7.5 | 1.04 1.74 2.08 | 8.5 8.0 7.5 | 1450 | 0.25 0.29 0.31 | 0.55 | 35 48 49 | 2.0 2.0 2.5 |
IS50-32-160A | 5.8 | 1.6 | 7 | 1450 | 0.24 | 0.55 | 46 | 2.0 |
IS50-32-160B | 5.4 | 1.5 | 6 | 1450 | 0.21 | 0.55 | 43 | 2.0 |
IS50-32-200 | 3.75 6.3 7.5 | 1.04 1.74 2.08 | 13.1 12.5 12 | 1450 | 0.41 0.51 0.56 | 0.75 | 33 42 44 | 2.0 2.0 2.5 |
IS50-32-200A | 5.8 | 1.6 | 11 | 1450 | 0.43 | 0.55 | 40 | 2.0 |
IS50-32-200B | 5.4 | 1.5 | 9.5 | 1450 | 0.37 | 0.55 | 38 | 2.0 |
IS50-32-250 | 3.75 6.3 7.5 | 1.04 1.74 2.08 | 20.5 20 19.5 | 1450 | 0.91 1.07 1.14 | 1.5 | 23 32 35 | 2.0 2.0 2.5 |
IS50-32-250A | 5.8 | 1.6 | 17.5 | 1450 | 0.92 | 1.5 | 30 | 2.0 |
IS50-32-250B | 5.4 | 1.5 | 15 | 1450 | 0.85 | 1.1 | 26 | 2.0 |