QBY pneumatic diaphragm pump is a relatively novel pump in the market. It has the advantages of simple structure, convenient disassembly and repair, stable liquid delivery, low vibration, low noise, strong self-priming capacity an···
Product overview:
QBY pneumatic diaphragm pump is a relatively novel pump in the market. It has the advantages of simple structure, convenient disassembly and repair, stable liquid delivery, low vibration, low noise, strong self-priming capacity and high liquid viscosity. It has many advantages of conveyor machinery such as self-priming pump, submersible pump, shield pump, mud pump and impurity pump. Compressed air is used as the power source. All kinds of corrosive liquids, liquids with particles, high viscosity, volatile, flammable and highly toxic liquids and liquids that are not easy to flow can be pumped and absorbed.
Product features:
1. There is no need for irrigation and water diversion, the suction lift is up to 5m, the lift is up to 70m, and the outlet pressure is > 7bar;
2. The flow is spacious and the passing performance is good, allowing the passing of larger particles up to 10mm in diameter. Little wear to the pump when pumping mud and impurities:
3. The head and flow can be adjusted steplessly through the opening of the air valve (the air pressure is adjusted between 1-7 bar);
4. The pump has no rotating parts, no shaft seal, diaphragm and other pumped media, which are separated from the moving parts and workpiece media of the pump, and the transmitted media will not leak outward. Therefore, when pumping toxic, volatile or corrosive media, it will not cause environmental pollution and endanger personal safety:
5. No need to use electricity, safe and reliable in flammable and explosive places;
6. Can work submerged in media:
7. The utility model has the advantages of convenient use, reliable operation and simple opening and closing of the gas valve. Even if the pump runs without medium for a long time or stops suddenly due to accidents, the pump will not be damaged. Once it is overloaded, the pump will stop automatically with self-protection performance. When the load returns to normal, it can start and operate automatically;
8. With simple structure and few vulnerable parts, the pump has simple structure and convenient installation and maintenance. The medium delivered by the pump will not contact the moving parts such as valve and connecting rod. Unlike other types of pumps, the performance will gradually decline due to the wear of rotor, piston, gear, blade and other parts:
9. It can transport viscous liquid (viscosity below 10000 centipoise);
10. The pump does not need oil lubrication. Even if it idles, it has no impact on the pump.
Application scope:
Petroleum, chemical, food, medicine, electronics, ceramics, textile, brewing, papermaking and other industries
Live show:

