Fork Lift Power Units 1
General Description
Equiped with a high pressure gear pump,a DC motor, a multifunctional manifold, valves and a tank etc. This power unit features power up gravity down function. Start the motor to lift the machine and the lowering movement is activated by the solenoid valve with the lowering speed controlled by the pressure compensated flow control valve. Products of this series can be widely used in the industry of logistic devices such as fork lift,mini lift table etc.
Outline Dimension
Model Specifications
Model
| Motor Volt
| Motor power
| Rated Speed
| Displacement
| System pressure
| Tank Capacity
| L(mm) |
YBZ5-F1.2A1W2/WUAAD1 | 12VDC | 1.5KW | 2500 RPM | 1.2mL/r | 20MPa | 3.5L | 409 |
YBZ5-F1.6B1W2/WUAAD1 | 1.6mL/r | 5L | 459 |
YBZ5-F2.1B1W2/WUAAD1 | 2.1mL/r | 5L | 459 |
YBZ5-F2.1B2A2/WUABD1 | 24VDC | 2KW | 2.1mL/r | 6L | 509 |
YBZ5-F2.5C2A2/WUABD1 | 2.5mL/r | 8L | 579 |
YBZ5-F2.7C2A2/WUABD1 | 2.7mL/r | 8L | 579 |
Remark: 1. Please go to page 38 or consult our sales engineer for the different pump displacement, motor power or tank capacity.
2. The manual override function is available on request.
Special notes
1. The power unit is of S3 duty, which can only be worked intermittentiy, ie., 1minute on and 9 minutes off.
2. Clean all the hydraulic parts concerned before mounting the power unit
3. The viscosity of the oil should be 15~68 cst.
4. Change the oil after the first 100 hours of using the power unit, then change the oil every 3000 hours.
5. The power unit should be mounted horizontally.