Fork Lift Power Units 3
General Description
Consisting of high pressure gear pump,DC motor,multi-functional manifold,valves and tank, this power unit has been widely used in the industry of logistic devices such as fork lift, mini lift table and scissors lift. The lowering movement is controlled by the solenoid valve with the lower speed controlled by adjustable throttle valve. The needle release valve is used for lowering movement in case of power failure.
Outline Dimension
Model Specifications
Model
| Motor Volt
| Motor power
| Rated Speed
| Displacement
| System pressure
| Tank Capacity
| L |
YBZ-F1.2A1W2/WUAAG1 | 12VDC | 1.5KW | 2500 RPM | 1.2mL/r | 20MPa | 3.5L | 411mm |
YBZ-F1.6B1W2/WUAAG1 | 1.6mL/r | 5L | 461mm |
YBZ-F2.1B1W2/WUAAG1 | 2.1mL/r | 5L | 461mm |
YBZ-F2.1B2A2/WUABG1 | 24VDC | 2KW | 2.1mL/r | 6L | 511mm |
YBZ-F2.5C2A2/WUABG1 | 2.5mL/r | 8L | 581mm |
YBZ-F2.7C2A2/WUABG1 | 2.7mL/r | 8L | 581mm |
Remark: 1. Please go to page 38 or consult our sales engineer for the different pump displacement, motor power or tank capacity.
2. The manual override function is available on request.
Special notes
1. The duty of this power unit is S3, i.e., 30 seconds on and 270 seconds off.
2. Clean all the hydraulic parts concerned before mounting the power unit.
3. Viscosity of the hydraulic oil shoud be 15~68 cst,which should also be clean and free of impurities.N46 hydraulic oil is recommended.
4. Oil changing is required after the initial 100 operation hours, afterwards once every 3000 hours.
5. The power unit should be mounted horizontally.