Auto Hoist Power Units 1
General Description
As one part of our YBZ series power unit family, this power unit is widely used in two-post auto hoists. Push the start button on the motor to lift the machine. The lowering movement is activated by the manual release valve, with the lowering speed controlled by the throttle valve in the return line. The power unit also applies to different kinds of hydraulic fork lift and scissors lift.
Outline Dimension
Model Specifications
Model
| Motor Volt
| Motor power
| Displacement
| System pressure
| Rated Speed
| Tank Capacity
| 总长(mm) |
L1 | L |
YBZ - E2D3H1/1 | 220VAC | 2.2KW | 2mL/r | 16MPa | 2830rpm | 10L | 440 | 717 |
YBZ - E3B3H1/1 | 3mL/r | 6L | 300 | 577 |
YBZ - E2C3H1/1 | 2mL/r | 8L | 370 | 647 |
YBZ - E2D4H1/1 | 380VAC | 10L | 440 | 717 |
YBZ - E2B4H1/1 | 6L | 300 | 577 |
YBZ - E2C4H1/1 | 8L | 370 | 647 |
YBZ - E3D4H1/3 | 3mL/r | 10L | 440 | 717 |
YBZ - E3E4H1/1 | 12L | 540 | 817 |
YBZ - E3D4I1/1 | 3KW | 3ml/r | 20MPa | 10L | 440 | 717 |
YBZ - F2.1C3G1/1 | 220VAC | 1.5KW | 2.1ml/r | 8L | 370 | 647 |
YBZ - F2.5D4H1/1 | 380VAC | 2.2KW | 2.5ml/r | 10L | 440 | 717 |
Remark: 1. Please go to page 38 or consult our sales engineer for the different pump displacement, motor power or tank capacity.
2. 60HZ motors with CSA or UL certification are available upon request.
Special notes
1.The power unit is of S3 duty, which can only be worked intermittently, ie., 1minute on and 9 minutes off.
2.Clean all the hydraulic parts concerned before mounting the power unit.
3.Viscosity of the oil shoud be 15~68 cst,and the oil should be clean and free of impurities,N46 hydraulic oil is recommended.
4.The power unit should be mounted vertically.
5.Check the oil level in the tank after the first star of the power unit.
6.Oil changing is required after the initial 100 operation hours, afterwards once every 3000 hours.