Power Units For Dock Leveler 6
Power Units For Dock Leveler 6
General Description
This power unit is deigned for those dock levellers which need floating ramps with an emergency stop function. The ramp will rise when the pump is running.The lip will expend automatically when the ramp cylinder finishes its stroke. The ramp cylinder will retract when the pump stops running. An emergency stop will be realized while the solenoid valve is energized. The lowering speed of both the ramp and the lip is adjusted by the throttle valves in the system.
Outline Dimension
Model Specifications
Model
| Motor Volt
| Motor power
| Motor speed
| Displacement
| System pressure
| Sequence pressure
| Tank Capacity
|
YBZ-E2.1B4E84/1 | 380VAC | 0.75KW | 1450RPM | 2.1mL/r | 13MPa | 8MPa | 6L |
YBZ-E2.7B4E84/1 | 2.7mL/r | 10MPa | 7.5MPa |
Remark:1. Please go to page 38 or consult our sales engineer for the different pump displacement, motor power or tank capacity.
2. 60HZ motors with CSA or UL certification are available upon request.
Special Notes
1.The power unit is of S3 duty, which can only be worked intermittently, ie., 1minute on and 9 minutes off.
2.Clean all the hydraulic parts concerned before mounting the power unit.
3.Viscosity of the hydraulic oil shoud be 15~68 cst, which should also be clean and free of impurities.N46 hydraulic oil is recommended.
4.Check the oil level in the tank after the first start of the power unit.
5.Change the oil after the first 100 hours of running the power unit, then change the oil every 3000 hours.