Pallet Truck Power Units
General Description
Consisting of high pressure gear pump,Low noise DC motor,multi-functional manifold,valves,tank,ect. This power unit can be widely used in the industry of logistic devices such as minifork lift ect.The lowering movement is controlled by the solenoid valve with the speed controlled by the balance valve.
Outline Dimension
Model Specifications
Model
| Motor Volt
| Motor power
| Rated Speed
| Displacement
| System pressure
| Tank Capacity
| L(mm) |
YBZ5-E0.5W1T2/VUSAP1 | 12VDC | 0.8KW | 3500rpm | 0.5mL/r | 16MPa | 1L | 307 |
YBZ5-E0.63W1T2/VUSAP1 | 0.63mL/r |
YBZ5-E0.5Y2T2/VUSBP1 | 24VDC | 0.5mL/r | 1.5L | 337 |
YBZ5-E0.63Y2T2/VUSBP1 | 0.63mL/r |
YBZ5-E0.75W2T2/VUSIP2 | 0.75ml/r | 16.5MPa | 1L | 335 |
Remark: 1. Please go to page 38 or consult our sales engineer for the different pump displacement, motor power or tank capacity.
2. The manual override function is available on request.
Special Notes
1.The power unit is of S3 duty, which can only work intermittently and repeatedly,ie., 1minute on and 9 minutes off.
2.Clean all the hydraulic parts concerned before mounting the power unit.
3.Viscosity of the hydraulic oil shoud be 15~68 cst,which should also be clean and free of impurities.N46 hydraulic oil is recommended.
4.This power unit should be mounted vertically.
5.Check the oil level in the tank after the first star of the power unit.
6..Oil changing is required after the initial 100 operation hours, afterwards once every 3000 hours.