Power Units For Dumping Truck Covering
Power Units For Dumping Truck Covering
General Description
Used to operate a double action cylinder of the dumping truck covering mechanery, this power unit consists of high pressure gear pump,DC motor, multi-functional manifod,valves and oil tank, ect. The opening and closing actions of the covers are controlled by a solenoid directional valve, while the speed is adjusted by the throttles.
Outline Dimension
Model Specifications
Model
| Motor Volt
| Motor power
| Displacement
| System pressure
| Tank Capacity
| L(mm) |
YBZ-F1.6A1W8/1 | 12VAC | 1.5KW | 1.6mL/r | 18MPa | 3.5L | 448 |
YBZ-F2.5B2A8/1 | 24VAC | 2KW | 2.5mL/r | 18MPa | 5L | 463 |
Remark: Please go to page 38 or consult our sales engineer for the different pump displacement, motor power or tank capacity.
Special Notes
1.The duty of this power unit is S3, i.e., 30 seconds on and 270 seconds off.
2.Clean all the hydraulic parts concerned before mounting the power unit.
3.Viscosity of the hydraulic oil shoud be 15~68 cst,which should also be clean and free of impurities.N46 hydraulic oil is recommended.
4.The power unit should be mounted horizontally.
5.Check the oil level in the tank after the initial running of the power unit.
6.Change the oil after the first 100 hours of running the power unit, then change the oil every 3000 hours.