Welcome Customer !

Membership

LEFOO Industrial Co.,Ltd.
Free Member ·1YRS
,
Other

Main Products: 压力开关

Xwboo>Products
Product Categories

LEFOO Industrial Co.,Ltd.Free·1YRS

  • E-mail

    sales@lefoo.com

  • Phone

    +86-0577-27826729

  • Address

Contact Now

AFS Pressure Switches

Model
Nature of the Manufacturer
Other
Product Category
Place of Origin
City, Province
Overview
AFS Pressure Switches
Product Details

The AFS is general-purpose airflow proving switches designed for HVAC, detection of blocked filters and fans suction, airflow monitoring in ducts, pipes, tunnels, and other energy management applications. It may be used to sense positive, negative or differential air pressure.

The plated housing contains a diaphragm, a calibration spring, and a snap-acting switch. The sample connections located on each side of the diaphragm accept a 0.25" OD tubing via the integral compression and nut. An enclosure cover guards against accidental contact with the live switch terminal screws and the set point adjusting screw. The enclosure cover will accept a 0.5" conduit connection. The AFS-460 has a reset button located on the top surface of the enclosure cover.

Model

AFS-222(LF35-1)

AFS-262(LF35-2)

Medium

Air

Air

Mounting Position

The diaphragm in any vertical plane

The diaphragm in any vertical plane

Field Adjustable Range

0.05±0.02" W.C. to 12.0" W.C.

0.05±0.02" W.C. to 2.0" W.C.

Switch Differential

Progressive, increasing from approximately 0.02" W.C at minimum set point to approximately 0.8" W.C. at maximum set point.

Progressive, increasing from approximately 0.02" W.C at minimum set point to approximately 0.1" W.C. at maximum set point.

Maximum Pressure

0.5psi (0.03bar)

0.5psi (0.03bar)

Operating Temperature Range

-40?-82?

-40?-82?

Electrical Rating

300 VA pilot duty at 115-277VAC, 10amp, non-inductive, 277VAC, 60Hz.

300 VA pilot duty at 115-277VAC, 10amp, non-inductive, 277VAC, 60Hz.

Electrical Connections

Screw top terminals with cup washers

Screw top terminals with cup washers

Sample Line Connections

Ferrule and nut compression type connectors that accept 0.25" OD rigid tubing.

Ferrule and nut compression type connectors that accept 0.25" OD rigid tubing.

Contact Arrangement

SPDT

SPDT

Conversion: 1mbar=100Pa 1"W.C.=249Pa