-
E-mail
sales@gdpump.com
-
Phone
4006918768,021-62995891,62995892,62995893
- Address
Membership
Help
Shanghai high-end pump manufacture Co., LTDFree·1YRS
sales@gdpump.com
4006918768,021-62995891,62995892,62995893
Products overview:
FPZ decay resistance plastic self-priming pumps adopt reinforced polypropylene (CFP-PP) a injection molding. Very high mechanical strength and corrosion resistance of a very strong self-suction pump have unique scientific structure, pump chamber are equipped to absorb fluid room, liquid storing room, back to liquid check valve, gas to liquid separation chamber, backflow holes. Just in the first before starting the perfusion lead liquid, later don't have to repeat perfusion lead liquid, in a send medium, liquid was on and off, and broken liquid 15 minutes to liquid can continue to absorb send, mechanical seal no need for additional cooling water cooling, cooling for natural, simple operation, safe no leakage, replace submerged pump is the most ideal products.
Product features:
Pump impeller and in the cavity axis integration, stop the key skid into the metal shaft and the media. Direct type structure is very compact, high efficiency; The two stages of linkage, pump shaft easy installation. Apply 10 ℃ ~ 90 ℃-flow 11-50 m3 / h, where the head 18-32 m, speed 2900 r/min
Product use:
Applicable to general acid and alkali resistant to salt, chemical, pharmaceutical, food, smelting, environmental protection, sewage treatment, inorganic salt, etc.
型号 进口×出口 流量Q 扬程H 转速n 吸入高度 电机功率P 25FPZ-10(D) 25×20 2.5 10 2840 5 0.55 32FPZ-11(D) 32×25 3.4 11 2840 5 0.75 40FPZ-18 40×32 11 18 2840 5 1.5 50FPZ-20 50×40 13 20 2840 5 2.2 65FPZ-25 65×50 26 25 2840 5 4 80FPZ-32 80×65 50 32 2840 5 7.5 100FPZ-40 100×80 100 20 2840 5 11
(mm)
(m3/h)
(m)
(r/min)
(m)
(kw)