-
E-mail
sales@gdpump.com
-
Phone
4006918768,021-62995891,62995892,62995893
- Address
Membership
Help
Shanghai high-end pump manufacture Co., LTDFree·1YRS
sales@gdpump.com
4006918768,021-62995891,62995892,62995893
Products overview:
magnetic centrifugal pump (hereinafter referred to as magnetic pump), usually from motor, magnetic coupler and corrosion resistance of centrifugal pump. Its main characteristic is using magnetic coupler transfer power, complete with no leakage and when motor driving magnetic coupler outside of pumpbody rotates, the field lines through the gap and isolation set, role in the magnets, pump and motor rotor synchronous rotation, no mechanical contact to transfer and rejected. In the pump shaft power input, liquid was closed because the rest of the isolation in set inside, did not move seal and safety and no leakage. Pump flow components can be used separately according to need 304, 304 L, 302, 321, 316, 316 L, UB6, CD4MCu, titanium, nickel base alloy corrosion materials etc. CQB series of magnetic pump is the input to the magnetic pump joint development of new completely no leakage decay resistance pump, its technical and economic indexes and the same products abroad at the same level at the end of the eighty s. CQB series of magnetic pump type and basic parameters accord with TB/T7742-95 "for small magnetic transmission centrifugal pump" standard requirements.
Main application and the suitable environment
CQB series of magnetic pump used in petroleum, chemical, pharmaceutical, smelting, electroplating, environmental protection, food, film developing, water treatment, national defense industry, transportation is flammable, explosive and volatile, toxic, rare and precious fluid and all kinds of corrosion resistance of the liquid ideal equipments. Applicable to transport maximum system pressure 1.6 MPa, the temperature is not more than 100 degrees Celsius, the density is not more than 1840 kg/m3. Not more than 30 x10 viscosity-6 m2 / S contains no hard particles and the fiber of liquid. System work pressure if more than 1.6 MPa, can be in special design, the highest system work pressure can reach 15 MPa.
CQB-G high temperature magnetic pumps are suitable for conveying system work pressure is less than 1.6 MPa, temperature, and no more than 208 degrees, density is not more than 1840 kg/m3, viscosity is not more than 30 cm2 / s contains no hard particles and the fiber of liquid. (material: 304, 316, 316 L stainless steel)
Model explains: