Welcome Customer !

Membership

Shanghai high-end pump manufacture Co., LTD
Free Member ·1YRS
,
Other

Main Products: 泵

Xwboo>Products

W series hydraulic injector

Model
Nature of the Manufacturer
Other
Product Category
RPP all plastic water spray vacuum pump unit
Place of Origin
City, Province
Overview
W series hydraulic injector
Product Details

Products overview:

Hydraulic ejector is a process of pumping air into vacuum state, condensation, drainage and other three kinds of effective mechanism. It is to use a certain pressure of water flow through the symmetrical uniform with a certain slope. Polymerization in a focal point, because of the jet flow rate is very high, so the form around to make indoor generation vacuum negative pressure, the other due to the secondary steam condensation water, was not a small amount of condensing steam by and non condensable gas also because water rub against each other, with high speed jet mixing and extruding, pressure pipe through expanding excluded, make indoor higher vacuum forming. But now in the production of hydraulic injector factory is small, is not complete, therefore, we continuously improve design in recent years, the nozzle and air ring (guide plate), and other structures, and the use of multistage pump water installation, low suction installation height 4.5 meters, perfect and improve the performance of the work, have a certain sophistication, is a kind of innovation of vacuum cooling equipment.

Product features:

The whole device has the advantages of compact structure of precision, high intensity change, used in vacuum evaporation system, due to the cooling effect of the condenser and vacuum pump suction effect in a device at the same time to complete the merger, greatly simplifies the process, than the original and the old condenser device by using a vacuum pump, can save to vacuum pump, condenser, water segregator and other equipment, and has the following advantages:

Hydraulic ejector 1, small volume, light weight, compact structure. And high efficiency ShuangBi, power consumption is lower than the vacuum pump system, investors.

2, convenient operation and simple maintenance, no full-time personnel management, because of no mechanical transmission parts, so the noise is low, do not need lubricating oil consumption.

3, can the bottom of the outdoor installation, covers an area of less, can save the building area and installation costs.

Product use:

Hydraulic ejector application is extremely widespread, mainly used in vacuum and evaporation system, vacuum pump, vacuum evaporation, vacuum filter, vacuum crystallization, drying, deodorization, such as technology, is the food, pharmaceutical, chemical, food, salt, monosodium glutamate, dairy, fermentation, as well as some light industrial equipment widely, defense department requirements.

Structure description:

Hydraulic injector consists of body, cover, nozzle, the nozzle plate, guide plate, expanding pressure pipe and valve parts, such as nozzle made of stainless steel, the nozzle plate by the high quality steel processing, the rest parts are cast iron casting. Nozzle adopt the structure of nozzle, in order to get a larger water vapor - contact area, is advantageous to the heat, get good vacuum effect. Nozzle plate processing precision, the accuracy is higher, so that the focus of the gathered together in the same jet flow accurately. Guide plate is used to slow down the flow rate of the steam (or air), make the steam evenly importer chamber in order to avoid jet flow deviation, reduce volley efficiency.


 
Similar Product Recommend