Plastic Bottles Granulating Line for Bucket, Small Hollow Bottles, Milk Bottles

NegotiableUpdate on October 27

Model

Nature of the Manufacturer: Other

Product Category: Granulator

Place of Origin: City, Province

Online Consult Contact Information

Overview

The plastic bottles granulating line is suitable for HDPE thermoplastics, pelletizing method:strａnd type, water ring die cutting type, air cooling die cutting type.

Product Details

Plastic Bottles Granulating Line Description:

The plastic bottles granulating line is suitable for HDPE thermoplastics such as plastic bucket / small hollow bottles / milk bottles. The plastic granulating machine’s pelletizing method: strａnd type, water ring die cutting type, air cooling die cutting type.

Plastic Bottles Granulating Line

Plastic Bottles Granulating Line Application:

Plastic Bottles Granulating Line

Plastic Bottles Granulating Machine Technical Parameter:

Normal:

Model	ML85	ML100	ML130	ML160	ML160-Ⅱ
Output(kg/h)	120-200	200-400	400-650	600-1000	800-1200

High output, low consumption:

Model	ML85B	ML100B	ML130B	ML160B	ML180B
Output(kg/h)	200-350	400-550	600-800	800-1200	1000-1500

Plastic Bottles Granulating Line Detail:

Belt Conveyor
As standard design, plastic scraps such as film, filament, raffias conveyed into the compacting room through belt conveyor; to handle rolls’ scraps, roll hauling off device is an optional feeding method. Motor drives of conveyor belt and hauling device cooperate with ABB inverter. Feeding speed of conveyor belt or roll hauling off is fully automatic based on how full the compactor’s room is. Metal detector can be combined with belt conveyor, and can interlock with contrl system, to warn and stop the system, in case that metal is found in feeding.
Extruder
A specialized single screw extruder applied to gently melt the pre-compacted material. The plastic scraps will be well melted, plasticized in a 36D processing section. With double-zone vacuum degassing system, volatiles such as low molecular and moisture will be removed efficiency, especially suitable to heavy printed film and material with water content.
Water-ring Die-face cutting system
Water-ring die-face/Strａnd cutting methods are usually adopted. In water-ring die-face cutting system, the rotary cutting blades will be pneumatically fit completely and closely to the die-face surface to ensure efficient cutting. Rotary speed of the blades is automatically adjusted by module system according to melt pressure at the die face.
Vibration drying system
Advanced dewatering vibration sieve combing with horizontal-type centrifugal dewatering present high performance dried pellets and lower energy consumption.Combine crushing, compacting and plletizing steps in one system, less-labor cost.Higher efficiency feeding, suitable to film, filament, raffia, foaming materials;Higher output and lower energy consumption
Electric control system
One button “START",One button “STOP", lEmergency Stop. lProtection switch. Every operation position and rotary parts are equipped with limit switches for safety protection. lPrecise temperature control, optimized plasticization design, ensure reliable quality of granules. lProtection from over-heat in the compactor.