Welcome Customer !

Membership

Jiangsu Liangcai Electronics Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: LED显示屏

Xwboo>Products

Dense busbar

Model
Nature of the Manufacturer
Other
Product Category
/fixed power series
Place of Origin
City, Province
Overview
Dense busbar
Product Details



1

Product Usage

Dense busbar for rated current 660V, frequency 50Hz (60HZ), rated current 100-5000A AC three-phase three-wire, three-phase four-wire,

Phase 5 of the distribution network, is the modern large and medium-sized enterprises, high-rise buildings, engineering test base and other places the best equipment for the supply.


Product outline drawing

2


Features:

1, dense structure to withstand the larger current load and occupy the smallest space, its compact structure, small size, interchangeability, versatility is particularly evident in the characteristics.

2, the busbar conductor with polyester film insulation material bandage, greatly enhanced between the phase bus and between the relative dielectric strength, with a high dielectric strength.

3, busbar conductor selection of excellent, large transmission current, line loss is small, long life.

4, the busbar with a new joint process, so that the joint temperature is very low.

3

The main technical parameters:

1, rated insulation voltage: 660V

2, rated frequency: 50-60HZ

3, rated current: see the table below

4, insulation resistance: each section of the busbar insulation resistance greater than or equal to 20MΩ, the user should check the insulation resistance installed after installation.

5, the media strength: each section of the busbar unit factory are full by 50Hz / 3750V / min power frequency withstand voltage test.

6, short-circuit strength: the busway to bear the table below the rated short-time withstand current and rated peak withstand current generated by the thermal application and electric power. After the bear without permanent inspection deformation.


4


Similar Product Recommend