4K*2K HDMI DVI Full HD Optical Transceiver
Introduction
4K HDMI optical transceiver are enclosed HDMI optical modules designed to support transmission of an uncompressed lossless HDMI 1.4a signal over multimode optical fiber at 850nm, up to distances of 300m, at a resolution of 4Kx2K. 4 K HDMI OPTICAL TRANSCEIVER -T converts an HDMI signal to a single 10Gb/s serial data stream for transmission over two optical fibers. 4 K HDMI OPTICAL TRANSCEIVER -R converts the serial data back to an HDMI signal. The transceivers are RoHS compliant and lead-free per requirements in Europe and China.
This product is ideal for large-screen display, conferencing systems and home entertainment and so on. The device has the ability of anti-interference, to ensure the stability of the signal.
Features:
- HDCP Support
- DDC CEC HPD Signal Support
- Supports up to 300m Transmission Distance at up to 10.3Gbps with OM3
- Multimode Fiber
- Supports All Modes up to 4Kx2Kx30 Resolution
- Standard HDMI Connector
- Integrated USB Connector for Power
- Double Power Supply (HDMI 5V&USB)
- Hot-Pluggable
- EMI/RFI Resistant
- 850nm VCSEL and PIN Photodetector
- 2-Wire Interface
- Typical Power Dissipation 1420 mW
- (Source), 1220 mW (Sink)
Package Contents:
- n HDMI fiber Transmitter 1pcs
- n HDMI fiber Receiver 1pcs
- n Power Cable 2pcs
- n User Manual 1pcs
Specifications
ABSOLUTE MAXIMUM RATINGS (ESTIMATED)
ABSOLUTE MAXIMUM RATINGS (ESTIMATED)
| Parameter | Symbol | Unit | Min | Typ | Max | Notes |
| Storage Temperature | TS | ˚C | -40 | - | 100 | |
| Case Operating Temperature | TC | ˚C | 0 | - | 100M: 70 200M: * 300M: 60 | |
| Relative Humidity | RH | % | 5 | - | 95 | |
| Supply Voltage | VccT, VccR | V | -0.3 | - | 3.8 | |
KEY PARAMETERS
Power Consumption
Power Consumption
Electrical Interface
| Parameter | Min | Typ | Max | Unit | Notes |
| Data Rate Per Lane | | 10 | | Gbps | |
| Power Consumption | | 1420 | | mW | TX Side |
| | | | |
| | 1220 | | mW | RX Side |
| emperature Range | 0 | | 100M: 70 200M: * 300M: 60 | °C | |
| Power Supply Voltage | | 5 | | V | +/-5% |
| Resolution | Up to 4K/2K | | |
| Refresh Rate | Up to 120 Hz | | |
| Depth | Up to 48-bit | | |
| Support 3D | Yes | | |
| Support HDCP | Yes | | |
| Wavelength | 850 | nm | |
| Bit Error Rate Performance | 1.00E-12 | | |
| Laser Output Power | Class 1 | | EN 60825-1 2007 EN 60825-2 A2 2010 |
| Management Interface | Two-Wire Serial | | |
| Mechanical Specification | | | |
| Electrical Interface | 19 | Pins | HDMI A Type Port |
| 4 | Pins | USB Standard A |
| Pulling Force | 111 | N | |
Installation
- 1. Connect the HDMI optical Transmitter to the HDMI signal source.
- 2. Connect the HDMI optical Receiver to the displayer(Such as HD TV, splicing screen, etc.).
- 3. Use the LC multimode fiber(OM3) connect between the transmitter and the Receiver.
- 4. User micro usb cable Power on the Transmitter and Receiver of the HDMI optical transceiver.
- Application Diagram
