● It can set address & protocol in speed dome OSD menu
● Powerful Sony original module FCB-CX1010, 1/4" Ex-view HAD CCD inside,530TVL, Wide Dynamic Range function.
● Remote update flash of speed dome by RS485 bus
● Automatically identify PEAMRAIN protocol or PELCO D/P protocol
● Automatically identify SANYO, SONY, HITACHI, CNB series etc. camera module.
● Powerful OSD menu for setup of Programmable Functions
● With function of auto focus, auto iris, auto white balance and auto backlight compensation etc. to have clear camera scene at any time.
● Built-in linear power for anti-surge and anti-Lightning protection
● Alarm (8ch inputs & 2 repay out), smoked cover, Pelco C, Manchester communication, available to application.
● Built-in function of protocol converter, to support RS485 communication or Manchester code.
● Preset position storage function, it can save maximum 256 preset.
● 8 cruise tours, every tour can call 32 preset.
● 4 Pattern tours, to save the scan route by joystick.
● 1 automatic scan, the scope of two limits can be scanned gradually, the scanning steps are optional.
● Automatic recover to movement before power failure.
● Time start-up function, to start movement in time table have been set.
● Power-up action, preset, cruise tour, pattern tour, auto scan, etc. available for it.
● Park action, preset, cruise tour, pattern tour, auto scan, etc. available
● 360° continuous panning.
● -5°~90° tilting rotation, automatic flip function, continuous tilting between -5°to 185°.
● Privacy masking function, Up to 24 Zones, 8 Zones Masked Simultaneously in One Camera Image .
● Limit setting, to set the pan or tilt movement in a scope.
● On-Screen display: Compass, Pan, Tilt, Zoom ratio and temperature