PE3032OS2-IR analog camera

NegotiableUpdate on September 29

Model

Nature of the Manufacturer: Manufacturer

Product Category: Analog Speed Dome Camera

Place of Origin: City, Province

Online Consult Contact Information

Overview

PE3032OS5-IR IR Outoor high speed dome, is with Sony original FCB-EX1010 module,36x12 day/night,530TVL,Wide Dynamic Range, IP66 waterproof double-shell of aluminum, mutiple bracket for applications. 100m IR disatance.

Product Details

Functions

It can set address & protocol in speed dome OSD menu

Powerful Sony original module FCB-EX480C, 1/4" Ex-view HAD CCD inside,480TVL.

Remote update flash of speed dome by RS485 bus

Automatically identify PEAMRAIN protocol or PELCO D/P protocol

Automatically identify SANYO, SONY, HITACHI, CNB series etc. camera module.

Powerful OSD menu for setup of Programmable Functions

With function of auto focus, auto iris, auto white balance and auto backlight compensation etc. to have clear camera scene at any time.

Built-in linear power for anti-surge and anti-Lightning protection

Preset position storage function, it can save maximum 255 preset.

8 cruise tours, every tour can call 32 preset.

1 automatic scan, the scope of two limits can be scanned gradually, the scanning steps are optional.

Power-up action, preset, cruise tour, pattern tour, auto scan, etc. available for it.

360° continuous panning.

-5°～90° tilting rotation, automatic flip function, continuous tilting between -5°to 185°.

Privacy masking function, Up to 24 Zones, 8 Zones Masked Simultaneously in One Camera Image .

Soft address to set

On-Screen display: Compass, Pan, Tilt, Zoom ratio.

IP66 waterproof for outdoor applications

100m IR distance

SPECIFICATIONS

Specifications for Pan-tilt:

Address	0~255
Pan range	360°Continue
Tilt range	0°~90° Flip
Manual speed Pan	0.05~240°/Sec
Manual speed Tilt	0.05~180°/Sec
Preset speed	300°/Sec
Preset accuracy	±0.50°
Preset	255
Remote firmware updating and setup	to update firmware by RS485, to set ID by RS485
Cruise Tours	8 Programmable(Dwell time speed preset point)
Speed setup for cruise tour	Yes
Auto Scan	1 Programmable (355° scan )
Time adjustment	to adjust Time by broadcasting
Integrate multi-protocol	Pelco_D/P, PEARMAIN or OEM protocol
Protocol Automatic identify	Pelco_D/P, PEARMAIN
Broadcasting address	Yes
anti-surge and anti-Lightning protection	Yes, Power side:4KV, Video and data side: 2KV
OSD menu operation	Yes
Supporting camera	Automatic identify(Sony, Hitachi,etc.)
Camera menu operation	Yes
Camera character programming	20 character
Privacy masking	Yes
Ingress Protection IP66	Yes
Operating Temperature	–40℃~70℃
Humidity	0%~90% (Non condensing)
Heater operate	(-5)℃ on +5℃ off
Power	24VAC±25%,60Hz/50Hz
Consumption	IR off 15W IR on 35W
communication	RS485 (+/-)
Connection	BNC cable
Weight	4.5kgs (without bracket)

Camera block spec.

Image device	1/4 type EXview HAD CCD
Effective picture elements	Approx. 380,000 pixels
Lens	18x optical zoom, f=4.1 mm (Wide) to 73.8 mm (Tele), F1.4 to F3.0
Digital zoom	12x (216x with optical zoom)
Viewing angle (H)	48.0° (Wide end) to 2.8° (Tele end)
Minimum working distance	35 mm (Wide end) to 800 mm (Tele end)
Sync system	Internal/External (V-Lock)
Minimum illumination	0.7 lx (typical) (50 IRE)
S/N ratio	More than 50 dB
Electronic shutter	1/1 to 1/10.000 s, 22 steps
White balance	Auto, ATW, Indoor, Outdoor, One-push, Manual
Gain	Auto/Manual (-3 to 28 dB, 2 dB steps)
AE control	Auto, Manual, Priority mode, Bright, EV compensation, Back-light compensation
EV compensation	-10.5 to +10.5 dB (1.5 dB steps)
Back-light compensation	On/Off
Privacy zone masking	On/Off (24 positions)
Flicker cancel	Auto
Focusing system	Auto (sensitivity: normal, low), One-push AF, Manual, Infinity, Interval AF, Zoom Trigger AF
Picture effects	E-Flip, Nega Art, Black & White, Mirror Image
Camera operation switch	Zoom Tele, Zoom Wide
Video output	VBS: 1.0 Vp-p (sync negative), Y/C Output
Camera control interface	VISCA (TTL signal level), baud rate: 9.6 Kb/s, 19.2 Kb/s, 38.4 Kb/s, Stop bit: 1 or 2 selectable