PE3035IS7 mini dome

NegotiableUpdate on September 29

Model

Nature of the Manufacturer: Manufacturer

Product Category: Analog Speed Dome Camera

Place of Origin: City, Province

Online Consult Contact Information

Overview

Overview:PE3035IS7 is Mini 4" High Speed Dome Camera, with Sony FCB-EX11D 10x12 module, Day/night, 530TVL,Powerful OSD menu, with aluminium housing, multiple bracket for applications.

Product Details

Introduction Features

It can set address & protocol in speed dome OSD menu

Powerful Sony 10x12 Day/night module, 1/4" Ex-view HAD CCD inside, 530TVL.

Remote update flash of speed dome by RS485 bus

Automatically identify PEAMRAIN protocol or PELCO D/P protocol

Automatically identify SANYO, SONY, HITACHI, CNB series etc. camera module.

Powerful OSD menu for setup of Programmable Functions

With function of auto focus, auto iris, auto white balance and auto backlight compensation etc. to have clear camera scene at any time.

Built-in linear power for anti-surge and anti-Lightning protection

Preset position storage function, it can save maximum 256 preset.

8 cruise tours, every tour can call 32 preset.

4 Pattern tours, to save the scan route by joystick.

1 automatic scan, the scope of two limits can be scanned gradually, the scanning steps are optional.

Automatic recover to movement before power failure.

Time start-up function, to start movement in time table have been set.

Power-up action, preset, cruise tour, pattern tour, auto scan, etc. available for it.

Park action, preset, cruise tour, pattern tour, auto scan, etc. available

360° continuous panning.

-5°～90° tilting rotation, automatic flip function, continuous tilting between -5°to 185°.

Privacy masking function, Up to 24 Zones, 8 Zones Masked Simultaneously in One Camera Image .

Limit setting, to set the pan or tilt movement in a scope.

On-Screen display: Compass, Pan, Tilt, Zoom ratio and temperature

Parameter Description

Specifications for Pan-tilt:

Address	0~255
Pan range	360°Continue
Tilt range	0°~90° Flip
Manual speed Pan	0.05~240°/Sec
Manual speed Tilt	0.05~180°/Sec
Preset speed	240°/Sec
Preset accuracy	±0.50°
Preset	256
Remote firmware updating and setup	to update firmware by RS485, to set ID by RS485
Cruise Tours	8 Programmable(Dwell time speed preset point)
Speed setup for cruise tour	Yes
Pattern Tours	4 Programmable
Auto Scan	1 Programmable (355° scan )
Alarm	Optional, 4 inputs, 2 outputs
Temperature setup and display	Temperature alarm & display on screen
Time adjustment	to adjust Time by broadcasting
Date/Time setup and display	Date/time display on screen and modify
Timer Programming	timer action
Integrate multi-protocol	Pelco_D/P, PEARMAIN, Pelco C (optional)
Protocol Automatic identify	Pelco_D/P, PEARMAIN
Total working time recording	to record total working time and time exceed limit
Home position	Yes, preset, cruise tour, pattern tour, auto scan, etc. available
Password protection	Yes
Long-focus speed-limited	Yes
Broadcasting address	Yes
Intelligent power-off memory current setting and state	Yes
anti-surge and anti-Lightning protection	Yes
OSD menu operation	Yes
Supporting camera	Automatic identify(Sony, Hitachi , Sanyo, LG, CNB )
Camera menu operation	Yes
Camera character programming	20 character
Privacy masking	Yes
Ingress Protection IP66	Yes
Operating Temperature	–20℃~55℃
Humidity	0%~90% (Non condensing)
Heater operate	(-5)℃ on +5℃ off
Power	24VAC±25%,3A ,60Hz/50Hz
Consumption	heater off 6W heater on 11W
communication	RS485 (+/-) or Manchester
Connection	BNC cable

Camera

Image Sensor

1/4" Ex-view HAD CCD