Welcome Customer !

Membership

XwbooElectrical & ElectronicsSwitchTransfer Switch (Combination Switch)100E 125A 4P Din rail Generator Automatic Transfer Switch
  • $item.Title
  • $item.Title

100E 125A 4P Din rail Generator Automatic Transfer Switch

WENZHOU JUNKE ELECTRIC CO., LTD.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Transfer Switch (Combination Switch)
Place of Origin
ZheJiang, WenZhou
4P Generator ATSDual power switch. PC level, Switch less than 8ms, no Interrupt. Only for city power and Generator
100E 125A 4P Din rail Generator Automatic Transfer Switch
The dual-power automatic transfer switch (ATS) is a newly developed miniature household power transfer switch, is mainly used to test whether the main power or reserve power is normal.
When the normal power supply is abnormal, the reserve power supply will start work immediately to ensure continuity, reliability and safety of the power supply. It is specially designed for household rail installation for PZ30 distribution box.
The ATS is suitable for emergency power supply systems of AC50 or 60Hz and rated voltage 400V. It is featured with firm structure, reliable transfer, easy installation and maintenance, and long life, is widely used in places where frequent power outage is not allowed. Both electric and operation and manual operation are available. The ATS is composed of TES and controller.
According to the standardIEC 60947-6-1 : Multiple function equipment - Transfer switching equipment, we can know that ATS is the most suitable low-voltage switchgear and control device.
Basic parameters

Normal running time and installation conditions
1.Manual/automatic operation
ATS with automatic operation can ensure power generation and power-off performances, but for ATS with manual operation , it cannot ensure the above performance due to the speed of power generation and power-off or operator differences. Excessive silver alloy loss may occur during manual power generation and power down. Therefore, set the selector switch at the manual position under normal condition, and pull it to the manual position when all power is turned off to check and maintain the operating system and contacts. After the manual operation is completed pull the selector back to the automatic position.
2.Control circuit
ATS will be active in an instant. After the conversion is complete, the coils in the control circuit are disconnected by the internal converter. The coil can operate normally with a rated voltage of 80%~110%, and too low voltage may cause the coil to heat up or even ignite
  JUNKE, established in 2008, who specialized in research and design, manufacturing, and distribution of Ansi Socket Meter ,Electric Meter ,Generator Type Automatic Transfer Switch,Power Capacitor Correction,Power Factor Regulator ,Power energy analysis.Airc Circuit Breaker Which is widely used in Smart Grid Industry all covering distribution, Saving&Protecting& Metering Electicty, and Grid Power System and Generator Power Syestem. (Reactive Power and Generator power). We have one strong R&D and QC team continues to innovate new solutions, additions and extensions in the pursuit of not only meeting but exceeding market demand and to offer the best solutions for our customers.JUNKE's mission is to improve All Client Transformer Power Supply Quality, Reduce Power Loss, We provide reliable, accurate and customized Active power and Power Factor correction device for our customers.JUNKE values Enthusiastic by our work, we offer a quality personal and close service to our customersJUNKE sincerely supply you with high quality products and high effect service, willing to start deep cooperation with you soon after!!
Similar Product Recommend