Welcome Customer !

Membership

Xwboo100M 1T1E coaxial cable EOC converter
  • $item.Title
  • $item.Title

100M 1T1E coaxial cable EOC converter

Optical Network Video Technologies (Shenzhen) Co.,Ltd

Model
Nature of the Manufacturer
Manufacturer
Product Category
Place of Origin
GuangDong, ShenZhen

Optical Network Video Technologies (Shenzhen) Co.,Ltd

Contact

Phone

Fax

Related categories
100M 1T1E coaxial cable EOC converter with 1*10/100M auto-sensing RJ45 ports and 1*coaxial input/ output port. Power supply voltage DC12V/1A. Default transmission distance 300 meters.

OVERVIEW


The EOC1T1E-3 coaxial cable EOC converter is a high-speed network transmission device. IEEE-based P1901 technology can transmit high-definition video and high-speed data signals through any two-core cable. Such as elevator accompanying cables, twisted pairs, coaxial lines, etc. for long-distance transmission, the transmission distance can be up to 2000 meters (75-5 coaxial line). Network signals and RS485 signals can also be transmitted on one cable at the same time. It can support remote power supply and signal transmission via common cable, which facilitates construction and saves costs.

The EOC1T1E-3 can support one-to-one and one-to-multipoint data transmission. long transmission distance, high communication rate, and support multimedia services, networking, etc.


FEATURE


1. Long transmission distance: For ordinary SVY75-5 cables, the maximum transmission distance can reach 2km, while keeping the TCP/IP throughput not lower than 30Mbps.

2. High communication rate: Based on the SVY75-5 circuit, the on-site measured TCP/IP throughput data is:

1) The cable length is less than 400M—92Mbps

2) The cable length is less than 1000M—74Mbps

3) The cable length is less than 2000M—30Mbps

3. Support plug and play, no need to change any configuration of network terminal equipment such as network cameras.

4. Security and confidentiality. Support AES-128 security encryption; support manufacturers and users to match codes by themselves, and change communication passwords in real time on site.

5. It can make full use of the original coaxial cable, twisted pair or telephone line wiring, without re-laying communication media such as Ethernet, which greatly simplifies network deployment and reduces network installation costs.


Indication Lights

Equipped with two LED indicators

Coaxial: Physical link connection indicator for the coaxial cable, twisted pair link connectivity when the indicator is on the line, please check if the light is off the transmission line.

LAN Ethernet Link/ Activity LED: When an Ethernet connection has been established, the indicator light, Ethernet connection when there is data activity, the indicator flashes.


Configuration button

The master/ slave selection of communication link. The buttons for the wave of the key switch, when the switch to the left position, the device is configured as a master device (Slave), when dial to the right position, the device must be configured as a slave device (Master). In one network, there is just a master device, but there are multiple slave devices.


Device configuration

Twisted pair transmitter only needs to coordinate the communication link (that is, the same twisted pair) Master/ Slave mode when in use, usually only one master device can exist in a link (Master), all others are slave devices (Slave).

Toggle the Master/ Slave switch on the front panel of the device to determine the corresponding working mode of the device.


Operation steps

1. Choose master or slave.

2. The host and slave are connected with two core wires, please use the provided green terminal.

3. Connect the transmitter to the 12V power adapter respectively.

4. Coaxial: Physical link connection indicator: When the twisted-pair physical line is connected, the indicator is always on. If the indicator is off, please check the transmission line.

5. LAN: Ethernet interface connection/activity indicator light: The indicator light is always on when the Ethernet connection has been established, and the indicator light flashes when the Ethernet connection has data activity.

Note: After the device is powered on and the Master/Slave switch is toggled, it needs to be powered off and restarted, otherwise it will be invalid.


ORDERING INFORMATION


Model

Description

EOC1T1E-3

100M 1T1E coaxial cable EOC converter with 1*10/100M auto-sensing RJ45 ports and 1*coaxial input/ output port. Power supply voltage DC12V/1A. Default transmission distance 300 meters.


PACKING LIST


Packing List

Content

Qty

Unit

100M 1T1E Coaxial cable EOC converter

1

SET

DC12V, 1A Power Adapter

1

PC

User Guide

1

PC

Warranty Card

1

PC

TECHNICAL SPECIFICATION


Model

EOC1T1E-3

Operating temperature

-20 ℃ to 80 ℃

Relative humidity

5% to 95%, non-condensing

Maximum power consumption

1.6W

Power supply

DC12V/1A

Size

110*65*25mm

Wide Receiver port

RJ45*1, UTP*2

Weight

60g


Cable type, transmission distance and speed


Transmission Distance

SVY75-5 Coaxial Cable

Twisted Pair CAT5e

Telephone Line

300 meters

100Mbps

78Mbps

55Mbps

600 meters

90Mbps

65Mbps

20Mbps

1200 meters

78Mbps

60Mbps

1500 meters

50Mbps

40Mbps

2000 meters

30Mbps

25Mbps


Coaxial cable EOC converter, EOC converter, EOC
  Optical Network Video (ONV)Technologies is a national high-tech enterprise. As the first manufacturer for intelligent PoE in China,with world-class leading PoE technology. ONV focus on security industry over 18 years, combining research,manufacture,sales and services for PoE and Optical transmission products. Headquartered in ShenZhen CBD Che Kung Temple Tai ran mansion, more than 5000 square meters fine chemical plant, set up in the industrial complete LongHua Sen Yu Tai science and technology park. ONV products are exported to over 60 countries on five continents. ONV distributions and offices are all around the world,providing high-quality products ,outstanding service,and advanced overall solutions.
Similar Product Recommend