Membership
Help
ANHUANG ELECTRIC POWER TECHNOLOGY CO., LTD.
ANHUANG ELECTRIC POWER TECHNOLOGY CO., LTD.
For Single-Core Or 3-Core cold shrink 10Kv Cable Joint Kit ,10KVelectric power cable cold shrinkable terminal kit and joints.
Product Description:
1. Silicon rubber cold shrink cable joints are a series of openended, tubular rubber sleeves, which are factory expandedand assembled onto aremovable core.They are supplied for field installation in this pre-stretched condition.
2. The core is removed after the tube has been positioned for installation over an inline connection,terminallugor other similar applications, allowing the tube to shrink and form a waterproof seal.
3. Ourcold shrink cable jointsare cold applied and therefore they are quicker,easier and safer to install than heat shrink alternatives, and they are also ideal where hot work permits are difficult to obtain.
Features:
Provides constant radial pressure & seal without adhesive
Allows for expansion and contraction after installation
Simple & fast installation – no tools or heat required
Quality - long term reliability
Possible applications include electrical installation, cable repair, mechanical protection and moisture barriers
Property:
Test Item | Typical Value |
SectionalArea: | 25-400mm |
Core: | one tosix cores |
Voltage: | 1kv-110KV |
Arrange: | Out-door, In-door |
Color | Gray, Black |
Shore A Hardness | 42 |
Tensile Strength | 1102 PSI(7.6MPa) |
Elongation at Break | 680% |
Tear Strength | 150 PPI(26.3KN/m) |
Compression Set(22h/175°C) | 30 |
Applications:
Primary electrical insulation for all solid dielectric (rubber and plastic) insulated wire and cable splicing.
For indoor, outdoor.
Insulation of secondary splices, copper or aluminum conductors.
Relocation of service.
Dig-in repairs.
Sheath repairs
Environmental sealing for communication and other non-electrical applications.
Typical Physical and Electrical Properties