Welcome Customer !

Membership

XwbooElectrical & ElectronicsMotorDC Motor20kw 3 Phase Electric Motor
  • $item.Title
  • $item.Title

20kw 3 Phase Electric Motor

Liyuan Motor Ltd

Model
Nature of the Manufacturer
Other
Product Category
DC Motor
Place of Origin
,
Y2 series 20kw 3 phase electric motor is a kind of TEFC squirrel cage motor with the national unified design.

Product Introduction

Y2 series 20kw 3 phase electric motor is a kind of TEFC squirrel cage motor with the national unified design. It has the characteristics of high efficiency, energy saving, high starting torque, low noise, low vibration and easy maintenance. The grade of power and mounting measurements are subject to the IEC standard. This series motor is commonly used in the machinery without special requirement specially for reducer, air compressor, water pump, oil pump, packing and food machinery and so on.


Product Detail



Motor Type: 20kw electric motor

Output Power: 0.18 kW - 315 kW

Frame Size: IEC 63 - 355

Number of Poles: 2, 4, 6, 8

Voltage: 220/380V, 380/660V, 230/400V (can be customized according to users)

Frequency: 50 & 60 Hz

Protection Level: IP54 / IP55

Energy Efficiency Rating: IE1 / IE2 / IE3

Insulation Class: B/F

Cooling Method: IC411

Duty: S1


Product Parameter (specification)



20kw motor

Type

Power (KW)

Full Load

Rated Torque Tn(N*m)

Ist/In

Tst/Tn

Tmax/Tn

Current (A)

Speed(r/min)

Eff(%)

Power Factor

3000rpm.2 poles

Y2-160L-2

18.5

34.6

2930

89.3

0.9

60.1

7.5

2

2.2

Y2-180M-2

22

41.3

2940

89.9

0.9

71.46

7.5

2

2.2

1500rpm.4 poles.

Y2-180M-4

18.5

36.6

1460

89.3

0.86

120.2

7.5

2.2

2.2

Y2-180L-4

22

43.2

1460

89.9

0.87

142.9

7.5

2.2

2.2

1000rpm.6 poles

Y2-200L1-6

18.5

39.2

970

88.6

0.81

182.1

7

2.1

2.1

Y2-200L2-6

22

45.2

970

89.2

0.83

216.6

7

2.1

2.1

750rpm.8 poles

Y2-225S-8

18.5

42.6

730

86.9

0.76

242

6.6

2.2

2

Y2-225M-8

22

49

740

87.4

0.78

283.9

6.6

2.2

2


Production Features



image006

Know More Us


image006

Why Us



image008


Service and Packing



image009

Motor knowledge



The influence of the no-load current of the motor on the motor

Electric motors are widely used in factories and enterprises. They are electrical equipment that is often in contact with electricians. When the motor is running at no load (without load), the current flowing through the three-phase stator windings is called the no-load current of the motor.


The vast majority of the no-load current is used to generate a rotating magnetic field, called the no-load excitation current, which is the reactive current component of the no-load current.


A small part of the no-load current is consumed by various power losses such as friction and core loss when the motor is running at no load. This small part is the active current component, but the proportion is small or even negligible.


Therefore, the no-load current basically does not make a reactive current of useful work. From this point of view, the no-load current should be small, so that the power factor of the motor is increased, that is, it plays a role in an energy saving of the power grid, and also reduces the maintenance cost of the circuit.


Conversely, if the no-load current is large, since the cross-sectional area of the stator winding is constant, and the current allowed to pass is constant, the active current flowing through the wire can only be reduced, and the load that the motor can drive is When the motor output is reduced, the load is excessively large, and the winding is prone to heat or even burn the motor.


However, the no-load current should not be too small, otherwise, it will affect the other performance of the motor, making its performance worse. Therefore, the no-load current of the motor should not be too large or too small. Generally, the no-load current of a small motor is about 35%-50% of the rated current, and the no-load current of the large and medium-sized motor is about 20%-35% of the rated current. It is more appropriate.



Our HistoryLiyuan Motor Ltd, founded in 1989, is located in Fuan city, the electric motor town of China. Our company has floor area of 3500 square meters and is a professional manufacturer of small and medium size electric motors, equipped with advanced facilities, advanced production and perfect testing equipments. We are the excellent medium-small size motor manufacturer in China, aiming to provide the highest quality but lowest price to our clients.Our FactoryNow, We have a integrated team of high skilled technicians and professional salesmen with advanced product-development method and modernized management system. In order to manufacture high quality products, we make sure we take strict procedure controls, from “material select”, “machining”, “producing”. “assembling”, and “testing”, on each single part. All of our products are produced by national standard and reach the high level in China. Products is hot sale not only in domestic market also oversea regions such as South-East Asia, Middle Asia etc. Motors are quite welcomed and we received thousands good comments from customers.Our ProductThe main business of the company specially produces the cast-iron electric motor such as Y/Y2/IE2 general motor, YEJ break motor, YVF frequency controlled motor, YD multi-speed motor, YC/YCL/YL single phase motor, YTY pump motor, YLJ break motor etc and alluminum motor such as MS general motor, ML/MC single phase motor as well as brushed DC motor and brushed permanent magnet DC motor.
Similar Product Recommend