Welcome Customer !

Membership

XwbooElectrical & ElectronicsMotorDC Motor250w Dc Motor

250w Dc Motor

Liyuan Motor Ltd

Model
Nature of the Manufacturer
Other
Product Category
DC Motor
Place of Origin
,
ZYT series brush permanent magnet 250w dc motor has excellent motor performance: simple to operate, easy to maintain, low noise, low vibration.

Product Introduction

ZYT series brush permanent magnet 250w dc motor has excellent motor performance: simple to operate, easy to maintain, low noise, low vibration. 250 watt dc motor has the characteristics of good starting torque, good fixed speed characteristics, easy speed control, self-adjustment, and small speed changes. The motor is generally used for acceleration, deceleration or constant speed driving of industrial machinery with constant output,constant torque and square torque loads. The motor can be used as fiber machinery, packing machinery, conveying machinery, feeder, grinder, flour milling machine etc.


Product Feature



Motor Type: 250w dc motor

Output Power: 150/200/370/500/750W

Rated Voltage(V.DC): 220

Torque(KG*CM): 9 / 11 / 20 / 27 / 40

Rated Current(A): 1.3 / 1.5 / 3 / 3.7 / 4.5

Duty: S1

Cooling Method: IC411

Adjustable Speed Range: 30-1800RPM

Insulation Class: B/F

Temperature: -5℃-70℃


Product Parameter (specification)



image002


Production Details



12v 250w dc motor and 24v 250w dc motor and 24v 250w motor and 24 volt 250 watt dc motor and 100 rpm dc motor

image004

Know More Us


image006

Why Us



image008


Service and Packing


image009

FAQ



What is DC motor control method ?

In this control mode, the phase current waveform of the motor is close to a square wave, so it is called square wave control.


The advantage of square wave control is that the control algorithm is simple, the hardware cost is low, and the general performance of the controller can obtain higher motor speed. The disadvantage of square wave control is that the torque fluctuation is large, there is a certain current noise, and the efficiency cannot reach the maximum , Square wave control is suitable for occasions where the motor rotation performance is not required.


The sine wave control method adopts SVPWM wave, the output is a three-phase sine wave voltage, and the corresponding current is also a sine wave current. This method does not have the concept of square wave control commutation, and does not consider the existence of infinite commutation in the electric cycle. Obviously, compared with square wave control, sine wave control has smaller torque ripple and smaller current harmonics, and it feels more "fine" in control. However, the performance requirements of the controller are slightly higher than those of square wave control. The efficiency cannot be maximized.


The sine wave control realizes the voltage vector control, and indirectly realizes the current magnitude control, but cannot control the current direction. The FOC control mode can be regarded as an upgraded version of the sine wave control, which realizes the current vector control and the stator magnetic field vector control.


Because the direction of the stator magnetic field is controlled, the stator magnetic field and the rotor magnetic field can be kept at 90 degrees at any time, so as to achieve the maximum torque output under a certain current. The advantages of the FOC control method are: small torque fluctuations, high efficiency, and low noise , The dynamic response is fast; the disadvantages are: high hardware cost, high requirements for controller performance, high requirements for motor parameter matching, because FOC has obvious advantages, it gradually replaces traditional control methods in many applications, in the sports control industry Has been widely used.


Our HistoryLiyuan Motor Ltd, founded in 1989, is located in Fuan city, the electric motor town of China. Our company has floor area of 3500 square meters and is a professional manufacturer of small and medium size electric motors, equipped with advanced facilities, advanced production and perfect testing equipments. We are the excellent medium-small size motor manufacturer in China, aiming to provide the highest quality but lowest price to our clients.Our FactoryNow, We have a integrated team of high skilled technicians and professional salesmen with advanced product-development method and modernized management system. In order to manufacture high quality products, we make sure we take strict procedure controls, from “material select”, “machining”, “producing”. “assembling”, and “testing”, on each single part. All of our products are produced by national standard and reach the high level in China. Products is hot sale not only in domestic market also oversea regions such as South-East Asia, Middle Asia etc. Motors are quite welcomed and we received thousands good comments from customers.Our ProductThe main business of the company specially produces the cast-iron electric motor such as Y/Y2/IE2 general motor, YEJ break motor, YVF frequency controlled motor, YD multi-speed motor, YC/YCL/YL single phase motor, YTY pump motor, YLJ break motor etc and alluminum motor such as MS general motor, ML/MC single phase motor as well as brushed DC motor and brushed permanent magnet DC motor.
Similar Product Recommend