Welcome Customer !

Membership

XwbooInstrumentationEnvironmental Test ChamberOther Test Chambers3 Zone Thermal Shock Chamber /KTS-996A
  • $item.Title
  • $item.Title

3 Zone Thermal Shock Chamber /KTS-996A

Guangdong Komeg Industrial Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Other Test Chambers
Place of Origin
GuangDong, DongGuan

Volume and size

2.1 VolumeAbout 996L
2.2 Inner sizeW 900 mm*H 800 mm*D 1400 mm
2.3 Outer sizeW2012mm*H1910 mm*D 2412 mm((Not including the protruding part))Tips: For external dimensions, please confirm the three views according to the final design!
2.4 Floor areaAbout 4.85m2(Confirm after signing the contract)

3. The main technical parameters

3.1 Test ConditionsEquipment cooling method: water-cooledMeasured at water temperature +25 ° C, Temperature measurement comply with related regulation of IEC60068-3 / GB/T2424.5 standard; Sensors placed in the air outlet.
3.2 Shock Temp. rangeLow temperature :-40℃~-10℃ ,high temperature:+60℃~+150℃
3.3 Temp deviation±2.0℃
3.4 Temp Uniformity±2.0℃
3.5 Temp fluctuation≤1℃(≤±0.5℃ ,according to GB/T5170-1996
3.6 Conversion time≤ 5 sec
3.7 Recovery time≤ 5 min
3.8 Temperature shock performanceHigh temperature exposure + 150 ℃ for 30 minutesExposure at normal temperature (ambient temperature ventilation method) 5minLow temperature exposure -40℃, 30 minutes
3.9 Temperature impact temperature measurement pointTest area air outlet
3.10 Max loadLED size : 1200*600*50mm,Weight:6kg*2=12kg ,heating :16W
Note: Measured at no-load water temperature + 25℃, temperature performance test is measured according to the relevant regulations of IEC60068-3-5 standard; the sensor is placed at the air outlet of the air processing unit
3.11 High-temperature storage+ 60 ~ + 200℃ (upper limit of preheating is + 200℃)High-temperature storage heating time: from room temperature RT to + 200℃ for about 30 minutes)
3.12 Low-temperature storage0 ~-60℃ (The lower limit of pre-cooling is -60℃)Low-temperature energy storage cooling time: from room temperature RT ~ -60℃ for about 60 minutesNote :The rise and fall times of high-temperature and low-temperature energy storage are the performance of each energy storage space, not the test area
3.13 Noise≦75 (dB)(The noise detection device is measured 1m away from the door of the device)
3.14 Meet the test standardGB-2423.1-2008(IEC68-2-1) Test A: Low Temperature TestGB-2423.2-2008(IEC68-2-2) Test B: High Temperature Test GJB360.8-2009(MIL-STD.202F) High Temperature Life TestGJBl50.3-2009(MIL-STD-810D) High Temperature TestGJBl50.4-2009(MIL-STD-810D) Low Temperature TestGJBl50.5-2009 temperature Shock test method

4. Chamber Structure

4.1 Structural featuresOverall structure The test chamber was composed of three parts Individual samples test zone , High temperature zone , low temperature zone .Additional auxiliary refrigeration unit (rear side), electrical control cabinet (right side)
4.2 Thermal insulation structureOuter spray plastic anti-corrosion electrolysis plate - intermediate insulation layer is temperature resistant foam insulation material - inner chamber SUS304 stainless steel plate
4.3 Outer chamber materialHigh-quality anti-corrosion electrolytic board, surface electrostatic powder baking paint, color is KOMEG standard color
4.4 Inner chamber materialSUS304 stainless steel plate, thickness = 1.0 mm; the inner liner is fully welded.
4.5 InsulationHard polyurethane foam insulation layer, thickness = 100mm, flame retardant grade B2
4.6 DoorFull size Single door , left open ,Labor-saving door handleThe door frame is equipped with two silicone rubber sealing strips and anti-condensation electric heating device to prevent external dew condensation;

Customer size ,temperature range per customer requirements .

20200616101924530.jpg

20200616101924558.jpg

20200616101924690.jpg

  A 32-year specialist in advanced environmental test equipmentKOMEG Technology Industrial is famous for its KOMEG star brand of environmental test equipment in China since 1990.KOMEG has specialized in climatic test chambers, thermal shock test chambers, walk-in chambers,burn-in rooms, and aging test chambers, drying ovens, salt spray testers, medical laboratory equipment, etc.KOMEG factory is located in Dongguan, covering an area of 15,000 sqm, with over 200 employees including 26 R&D engineers.KOMEG also has offices in Shenzhen and Songshan Lake National Hi-Tech Industrial Development Zone.Born for quality,test for futureBorn for quality, test for future is always our philosophy. Better idea, better design and better quality is our aim.KOMEG strives for continuous innovation, releasing no less than 5 new designs each year. Our strong R&D team and skilled workers are the keys to our success.No matter it is a standard or custom-made project, we have rich experience in handling such so that customers worldwide can benefit more from KOMEG when working with us. And to ensure your specific test standards are met, the key components and parts are using an imported famous brand. That's why SGS, KONICA MINOLTA, SENKO, Midea, TCL, and Huawei are among our long-term clients.Why Choose UsBeing a first-class supplier and reliable partner, we are certified to ISO 9001 and got CE approval for all our products. All equipment is 7*24 hour tested before delivery. That explains why KOMEG is the private brand of choice for many well-known brand enterprises, and also one of the very few designated suppliers who were recognized by many top 500 enterprises.Let KOMEG's 32 years of professional experience work for you too. And meanwhile, we look forward to helping you.Distributors welcomed, Inquire today to get your order started.
Similar Product Recommend