Welcome Customer !

Membership

Xwboo400G DCI Web Management System
  • $item.Title
  • $item.Title

400G DCI Web Management System

Guangzhou Ruid Ele-tech CO., LTD.

Model
Nature of the Manufacturer
Other
Product Category
Place of Origin
,

Guangzhou Ruid Ele-tech CO., LTD.

Contact

Phone

15914235380

Fax

Related categories
The network management system is a comprehensive web-based platform that handles network information processing. It provides a visual interface to monitor the operational status of devices, quickly locate faulty equipment, and push fault notifications, among other practical functions.

400G DCI Web Management System


Device Status Viewing:

Viewthe status information of the boards.



Viewthe optical power information of the boards.



Viewthe operational status of the boards.



Viewthe status of the optical modules.




Alarm Management:


  • Displayalarms.
  • Real-timerecording of alarms generated by the device.


Security Management:


  • Provideoperation permission restrictions for login account roles, allowing allocationof accessible content based on levels to prevent potential malicious disruptionof communication order.
  • Providethe ability to add new users and assign new permissions.


Log Management:


  • Real-timerecording of host and user login to the software.
  • Real-timerecording of host and user operations and content on the web.


Other Functions:


  • Intuitiveview of device operating status.
  • Real-timeconfiguration modification capability.
  • One-clickdevice status view.


Host and Device Connection Diagram

Connect the "RJ45" interface of the networkmanagement card to the switch (personal PC) using an Ethernet cable. The"RJ45" interface indicator light should turn on or blink. If theindicator light does not blink or turn on, it indicates a communication issuewith the Ethernet cable, and you need to troubleshoot the connection.


Once you have confirmed that the device and thepersonal PC are connected properly via the Ethernet cable, open the IE browserand enter the device's IP address (default IP address: 192.168.1.228). Enterthe username and password (default usernames include root, admin, guest, andthe corresponding passwords are root@8989, admin@8989, guest@8989) to accessthe device interface.


Each network management device has four interfaces forcommunication, including two optical ports and two electrical ports (newerdevices may have three optical ports and two electrical ports). Depending onthe type of connection, each network management device can use one network port(optical port) to connect to an upper-level device and another network port(optical port) to connect to a lower-level device. The two network ports(optical ports) facilitate data exchange and expansion connections. Due to thedifferent speeds (100Mbps and 1Gbps) supported by the optical ports, it isnecessary to use a 100Mbps network port to connect to a 100Mbps optical port,and a 1Gbps network port to connect to a 1Gbps optical port for communication.


By daisy-chaining the network management devices usingan Ethernet cable (fiber optic cable), you can access all the interconnecteddevices. However, it is important to ensure that there are no loops in thefinal connection, as this could lead to network failure.


The diagram belowillustrates the wiring connections, where blue (or red) represents the Ethernetcable and yellow represents the fiber optic cable.


Figure 1-1: Schematic diagram of Ethernetport connections for a 4U device.

Figure 1-2: Schematic diagram of opticalport connections for a 4U device.





FiberWDM, was built by Guangzhou Ruid Ele-tech CO., LTD. is a fiber optical product manufacturer and integrated solution provider. Our primary products include, but are not limited to, the 1x9/XFP/SFP/SFP+/25G SFP28/40G QSFP+/100G/200G/400G QSFP optical transceiver, CWDM/ DWDM/ AAWG Devices, optical amplifier EDFA/100G 1310 SOA/Optical Fiber Repeater OEO, Optical Switch, Network Switch, and also include Network Packet Broker, Optical network OTAP for network security system. In FiberWDM, our goal is to provide optical fiber products with a high level of design quality and production integrity and have passed stringent testing. As a result of our efforts, our company has received the ISO9001 certificate, and our products have obtained CE, RoHS, and SGS certificates. Thus, customers can feel confident in purchasing and using our optical products. In addition to high-quality optical communication products, our customers also receive a comprehensive line of services, including customized design, installation, training, lifetime maintenance service, and technical support is available 24/7. Upon request, we can provide product samples, OEM, and ODM services; fast delivery time is also available, generally, in 3-7 days for orders under 500pcs.
Similar Product Recommend