Welcome Customer !

Membership

XwbooWarehouse LogisticsCard ReaderUHF RFID Reader4K HDMI KVM OVER IP Extender
  • $item.Title
  • $item.Title

4K HDMI KVM OVER IP Extender

Ask Technology Co., Ltd

Model
Nature of the Manufacturer
Other
Product Category
UHF RFID Reader
Place of Origin
,

Ask Technology Co., Ltd

Contact

Phone

+86-18665380020,13760128598

Fax

+86-755-81751802

1. Connection instructions

1.1 Connect the HDMI IN Port of the TX to the HDMI output port of signal source/PC over a HDMI cable.

1.2 Connect the HDMI OUT Port of the RX to the HDMI input port of display device over a HDMI cable.

1.3 Connect the 1G LAN Port of the TX to the 1G LAN Port of the RX over a network cable. Gigabit switches need to be inserted between TX and RX when multiplexing

1.4 TX and RX need to be set to the same ID number before use. (Only for HDEX0019M1)

1.5 Supply TX and RX with AC power adapter.

1.6 RS232, IR and other interfaces can be selected as required.

2.RS232 Communication:

2.1 To use RS232 to do communication, the TX RS232 Port Baud rate can be set to 115200. RX RS232 Baud rate can be adjusted between 1200-115200(refer to button function instruction),which need to be matched with the output connected serial port baud rate.

2.2 To use cross-link way for serial port connection, TXD to connect with RXD of the output connected device, the RXD to connect with the TXD of the output connected device, and GND to connect with GND.

2.3 At One to Many Connection mode, TX RS232 can send serial port data to many RX simultaneously and also can monitor many RX RS232.The TX only can receive data of one RX at the same time. When one of the RX send data, the TX will keep communicate with the RX, the other RX have to wait extra 0.2 seconds to get the chance of communicating with the TX after the current RX stopped communication.

3. IR Extend

3.1 IR Extend  is used for using IR remote to do distance control to the peripheral device.

3.2 To check if the working frequency of the IR remote is under the range of the 30-50HZ.

3.3 To point the IR Transmitter head at the peripheral device location.

3.4 At one to many connection mode, TX will monitor many RX IR interface. The TX only can receive one of the RX IR

 data. When one of the RX send data, the TX will keep communicating with the RX, the other RX have to wait the extra

2seconds to have the chance of communicating after the current RX stopped communicating.

4.Analog Audio Input and Output:

4.1 If the TX Line In or Line Out have cable connection, it will transmit  the Line IN input audio to the RX automatically.

4.2 If the RX MIC IN or LINE Out have cable connection, the HDMI Output audio will be mute and the audio will be priority

output from the LINE OUT Port.

4.3 TX Line Out audio signal is from RX MIC IN Port.

4.4 At One to Many Connection mode, it need to keep pressing the RX MENU button for lasting three seconds to get the

chance of using the TX LINE OUT Channel. After done successfully, the RX will show “USB owner”.

5.USB Expand:

5.1 To use the USB cable to connect the TX DEVICE Port to the PC. Normally no need to install driver, if meet the remind

of driver installation, please download the driver by linking the Ethernet.

5.2 It can insert the Mouse, Keyboard and U-stick and other peripheral device to the RX USB Port. And the peripheral

device driver still need to be installed at the PC.

5.3 The device can be used normally after the RX and RX USB LINK LED both go bright.

5.4 At One To Many connection mode, there are many RX, it need to short press the RX SET button to get the chance of

 using the RX USB Channel.

6.EDID Mode and Update:

6.1 There is one EDID Mode Switch, when choose MIX Mode, it will do mixed process to the EDID from both TX and RX

 HDMI Port Connected Device; when choose Copy Mode, it will only read the RX HDMI Port connected device.

6.2  HDEX0019M1 will update the new TV EDID to the TX automatically after detecting the RX HDMI port have

connected the new TV.

6.3  HDEX0020M1 can update the new TV to the TX by keeping press the MENU button for three seconds after

HDEX0020M1 have detected the RX HDMI port have connect the new TV.

7.Other matters needing attention:

7.1 After change the ID set-up, it need to be active by power off and on again.

7.2 If meet exception, the user can try to update the EDID.


Ask Technology Company limited was established in 2009 , manufacturer for Audio and Video products ODM/OBM/OEM with concentrate on R&D ,solution, design ,QC and producing teams . And insist on high quality level A/V products for market remand. Specially for HDMI switcher, splitter, converter, matrix, extender, wireless, KVM, video Capture, decoder, audio extractor, digital audio and SDI , DVI, VGA, AV, RF, Type-C,SPDIF and so on A/V interface devices , high-end professional displays include hook face displays and V-COB LED screen . With 3 R&D teams , more than 100 engineers with over 10 years experience for A/V technology hardware, software, PE and custom-development. Ask have been rewarded with the label of China High-Tech Enterprise from 2013 . Have more than 150 patents until now for invention,utility models ,software and design . And the adopter of HDMI & HDCP , cert of SGSISO9001 and all the products have the international test and authentication certificates. More than 5500 square metres SMT, testing, and Auto producing factory to make sure our quality and capacity of production . Ask products and design mainly point at US EU and others high standard oversea market , insists to the concept of stable quality, continuous innovation, considerate service, cooperation business philosophy to win the customer trust and the market share. Since its inception, we have been devoted to supply the innovating products with reasonable price with all our cooperation partners.
Similar Product Recommend