Welcome Customer !

Membership

XwbooEnvironmental ProtectionAir Purification EquipmentHumidifier50Khz Ultrasonic spray nozzle for Precise Coating machine
  • $item.Title
  • $item.Title

50Khz Ultrasonic spray nozzle for Precise Coating machine

Hangzhou Lanben Trade Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Humidifier
Place of Origin
ZheJiang, HangZhou
low flow spray ultrasonic atomizer nozzles focus micron and sub-micron droplets onto small parts from various viscosity solutions with very little overspray. Nozzles come in two styles, flat and wide spray tip. Nozzles are ideal for focusing droplets with our Pin Point Spray Shapers and for extra low solution deliveries.


50Khz Ultrasonic spray nozzle for Precise Coating machine


Introduction:


Ultrasonic Spray Nozzles As their name implies, ultrasonic nozzles employ high frequency sound waves, those beyond the range of human hearing. Disc-shaped ceramic piezoelectric transducers convert electrical energy into mechanical energy. The transducers receive electrical input in the form of a high frequency signal from a power generator and convert that into mechanical energy at the same frequency. The liquid is introduced to the atomizing probe with the use of a small pump or can be gravity feed. For the liquid to atomize, the vibrational amplitude of the atomizing surface must be carefully controlled. Below the so-called critical amplitude, the energy is insufficient to produce atomized drops. If the amplitude is excessively high, the liquid is literally ripped apart, and large “chunks” of fluid are ejected, a condition known as cavitation. Only within a narrow band of input power is the amplitude ideal for producing the nozzle’s characteristic fine, low velocity mist. The fine control of input energy is what distinguishes ultrasonic atomizing nozzles from other ultrasonic devices such as welders, emulsifiers, and ultrasonic cleaners; these other devices rely on cavitation with input power of the order of hundreds to thousands of watts. For ultrasonic atomization, power levels are generally under 15 watts. Adjusting the output level on the power supply controls power. Since the atomization mechanism relies only on liquid being introduced onto the atomizing surface, the rate at which liquid is atomized depends solely on the rate at which it is delivered to the surface. Therefore, every ultrasonic nozzle has an inherently wide flow rate range.

雾化


Parameter:


Item Parameter
Frequency 50Khz
Power 10~100w
FLOW RATE (ml/min) 0~20ml/min
Spray width 2~200mm
Solution utilization above 98%



Applications

  • Electronics: Photoresists onto Wafer etc.

  • Industrial: Glass, Fabrics, etc.  

  • Medical: Medical Textile, Diagnostic Device etc.

  • Energy: Fuel Cell, Solar Cell, etc.



The exact magnitude of power required depends on several factors. These include: 

  • Nozzle type 

  • Liquid characteristics (e.g. viscosity, solids content) 

  • Flow rate

We will recommend you different spray nozzle depending on your requirments. 


ultrasonic coating


  Rps-sonic, consisted with a couple of young people who love ultrasonic very much.The founding members of RPS-SONIC have an average degree of Bachelor's degree or above. They have been in the ultrasonic industry for more than 5 years and have rich experience in ultrasound. The company's business philosophy is: Do not blindly promote any product, find the most suitable product for customers. So before each order, we will confirm all the details, including application details, capacity,equipment conditions, equipment specific information.Before year 2012, we only sale ultrasonic welding equipment , during these twenty year develop, we find, more and more people have problem with the core part of ultrasonic welding equipment -generator and transducer, so we decided to start our business of transducer and generator of our own transducer and generator. Many of the end user meet the transducer problem, they don’t know why transducer broken, and changing the expensive transducer one by one. Actually, one branson /dukane /rinco transducer can use 10~30 year, even the cheapest transducer can use about 5 years. So there must be some reasons if your transducer broken in one year. That’s why we want build Rps-sonic, we need to help more end user to know more about ultrasonic systems, to use ultrasonic equipment better, to save cost when meet problem.The same to ultrasonic equipments, Unreasonable operation may shorter the use-life. So we have to make technical inquiry before operate ultrasonic machine. The key point of ultrasonic machine is resonance, only keep every part in resonance can make the system in best work environment. Of course we can make the transducer/generator replace for Branson /dukane/ rinco/ herrman telsonic welding machine, we can also make transducer/generator for any application of your ultrasonic equipment. We supply OEM service for oversea customers, we already have two OEM customer in USA and German.The high power ultrasonic system with different horn(probe) can work in different area, that why you can see different ultrasonic application , such like: ultrasonic welding , ultrasonic sewing , ultrasonic cutting , ultrasonic slicing, ultrasonic homogenizing and ultrasonic coating.The core components of ultrasonic system are always the ultrasonic generator and the Probe. The design of the vibrator probe and the stability of the ultrasonic generator have always been the most important factors in the ultrasonic application process. All the RPS-SONIC ultrasoic system will be tested 24 hours before shipment. and all the horn(probe) will design by ANASYS and resonance simulation, to confirm the perfect design.If you have any problem in ultrasonic area, welcome contact Rps-sonic.
Similar Product Recommend