Welcome Customer !

Membership

XwbooAgricultural MachineryOther Agricultural MachineryGrain Dryer5HGM-30S Low Temperature Circulation Type Grain Dryer
  • $item.Title
  • $item.Title

5HGM-30S Low Temperature Circulation Type Grain Dryer

Hubei Fotma Machinery Co., Ltd

Model
Nature of the Manufacturer
Manufacturer
Product Category
Grain Dryer
Place of Origin
HuBei, WuHan

Hubei Fotma Machinery Co., Ltd

Contact

Phone

18202720898

Fax

5HGM-30S Low Temperature Circulation Type Grain Dryer

Product Description

The 5HGM series grain dryer is low temperature type circulation batch type grain dryer. The dryer machine is mainly used to dry rice, wheat, corn, soybean etc. The dryer machine is applicable to various combustion furnaces and coal, oil, firewood, straw of crops and husks can all be used as heat source. The machine is automatically controlled by computer. The drying process is dynamically automatic. Besides, the grain drying machine is equipped with automatic temperature measuring device and moisture detecting device, which greatly increase the automation and ensure the quality of the dried cereals. In addition to drying the paddy, wheat, it can also dry rapeseeds, buckwheat, corn, soybean, cottonseed, sunflower seeds, sorghum, mung bean and other seeds, as well as some rule grains and crops with good fluidity and moderate volume.


Features:

1.Feeding and discharging grains from the top of dryer: Cancel the top auger, grain will directly flow to the drying part, avoid mechanical failure, lower power consumption and reduce the paddy broken rate.

2.Crosswise eight-groove drying technology: Thin drying layer, lower drying cost while higher drying efficiency.

3.Resistance-type online moisture meter: Error rate is ±0.5 only (Deviation for raw paddy moisture is within 3% only), very accurate and reliable moisture meter.

4.The dryer comes with fully automatic computer controlling system, easy on operation, high automation.

5.Double lower speed auger design could effectively reduce the auger failure rate and grain broken rate, also reduce the dryer height;

6.The elevator uses the large capacity polymer material bucket, higher reliability. The lower linear speed reduces the broken rate effectively during conveying process.

7.Equipped with four drying parts, double blowers, and the hot air enters the dryer from two sides, drying speed is fast and the quality of dry paddy is good.


Technical Parameters

Model

5HGM-30S

Type

Batch type, Circulation, Low temperature

Volume(t)

30.0

(Based on paddy 560kg/m3)

31.5

(Based on wheat 680kg/m3)

Overall dimension(mm)(L×W×H)

6594×4108×14166

Structure weight(kg)

6350

Hot air source

Burner (diesel or natural gas);

Hot air furnace (coal, husk, straw, biomass, etc.);

Boiler (steam or thermal oil).

Blower motor(kw)

2*7.5

Total power of motors(kw)/ Voltage(v)

20.15/380

Time of feeding(min)

Paddy

55~70

Wheat

57~72

Time of discharging(min)

Paddy

53~68

Wheat

58~70

Moisture reduction rate

Paddy

0.4~1.0% per hour

Wheat

0.4~1.0% per hour

Automatic control and safety device

Automatic moisture meter, automatic ignition, automatic stop, temperature control device, fault alarm device, full grain alarm device, electrical overload protection device, leakage protection device

Remarks:

1. The moisture reduction rate listed above is reference value. Effected by the air temperature outside, relative humidity, the variety of drying and so on, the actual value will be a little different:

(1) Raw grain condition: moisture < 30%, straw mixed rate < 2%, other inclusion mixed rate < 1%. The parameters may be changed when the raw grain with high moisture.

(2) The parameters using environmental conditions is air temperature 20℃, relative humidity 60%~80%.

2. The heat source is 0 # diesel (air temperature under 10 ℃ use - 10 # diesel) burner to direct heating.


  Hubei Fotma Machinery Co., Ltd is an enterprise that specialized in grain and oil processing equipment manufacturing, engineering designing, installation and training service. Our factory occupy the area more than 90,000m2, have more than 300 employees and over than 200 sets advanced production machines, we have the capacity to produce 2000 sets of varied rice milling or oil pressing machines per year. After constant great efforts, FOTMA has established a primary basis of modern management, and the systems of management computerization, information automation and scientific production control have shaped up. We gained the ISO9001:2000 certificate of conformity of quality system certification, and awarded the title of “High-tech Enterprise” of Hubei. Besides the domestic market, FOTMA products has been exported to dozens of countries in Africa, Asia, Middle East and South America, like Malaysia, Nigeria, Iran, Burundi, Philippines, Sri Lanka, etc.
Similar Product Recommend