Welcome Customer !

Membership

XwbooMachine Tool AccessoriesMachine Tool Functional PartsMotor7.5 Hp 220v Single Phase Motor
  • $item.Title
  • $item.Title

7.5 Hp 220v Single Phase Motor

Liyuan Motor Ltd

Model
Nature of the Manufacturer
Other
Product Category
Motor
Place of Origin
,
YCL series double capacitor 7.5 hp 220v single phase motor is optimized from YC single phase capacitor start motor. The mounting dimension is fully conformed with IEC standard.

Product Introduction

YCL series double capacitor 7.5 hp 220v single phase motor is optimized from YC single phase capacitor start motor. The mounting dimension is fully conformed with IEC standard. YCL motor is superior motors delivering excellent torque enabling the toughest jobs to be handled with dependable ease and perform well in high voltage fluctuating regions. YCL motor has the features of quiet operation, corrosion resistant, low vibration, low power consumption, long lifespan, low start current and good operation in hot environment. YCL motor is used in the pumping, compressor, agriculture, farming, building service and manufacturing industry.


Product Detail



Motor Type: 7.5 hp 220v single phase motor

Output Power: 0.75 kW - 5.5 kW

Frame Size: IEC 90 - 132

Number of Poles: 2 / 4

Voltage: can be customized based on users

Frequency: 50 & 60 Hz

Protection Level: IP54 / IP55

Insulation Class: B / F

Cooling Method: IC411

Duty: S1 (continuous)


Product Parameter (specification)



7.5 hp 220v single phase motor and 7.5 single phase motor

image001


Production Features



image002

image006

Know More Us


image006

Why Us



image008


Service and Packing


image009

About motor knowledge



The role of the motor iron core The iron core of the motor is not only a key component of electromagnetic energy conversion, but the iron core in the motor also bears the combined effects of mechanical vibration, electromagnetic force and heat. In order to reduce the eddy current loss in the iron core, a certain insulation resistance value is required between the iron core punches.


Repair of common faults of iron core


The individual teeth of the iron core tooth pressure plate are splayed outward in the axial direction. This is due to the fact that the teeth of the tooth pressing plate are not leveled during the stacking of the iron core. After the iron core is pressed, the punching sheet appears wavy, the iron core teeth are warped or the stator iron core is hit when the rotor is pulled The individual teeth of the tooth pressure plate are pried up, and when repairing, only the individual teeth that open outwards can be knocked flat with a copper rod.


The iron core is burnt out locally. The arc generated when a phase-to-phase short-circuit or grounding short-circuit occurs in the windings sometimes burns the iron core locally. If the burned area is not large, you can repair it without disassembling the iron core. First use a file, chisel, grinding wheel and other tools to shovel or smooth the burned area of the iron core, and then use a knife to remove the silicon steel sheets one by one. Coat the surface of the iron core with a layer of self-drying insulating paint, and then press the iron core tightly. If the burned area is large, you should replace the iron core or replace the damaged punch.


The core is loosened radially. The radial loosening of the iron core has the following two situations:


①Small motors using external press-fit iron core technology are caused by too loose fit between the outer circle of the iron core and the inner hole of the frame, or the positioning screw between the iron core and the frame is loose. The repair method is to fasten the positioning screws. If necessary, additional positioning screws can be added to the machine base, or the iron core and the machine base can be welded together;


②The large and medium-sized motors adopting the process of inner pressing iron core are caused by the open welding or loosening of the radial positioning device of the iron core or the welding of the iron core and the machine base. The repair method is to fasten the positioning device and install anti-loosening screws or repair welding at the de-welding place.



Our HistoryLiyuan Motor Ltd, founded in 1989, is located in Fuan city, the electric motor town of China. Our company has floor area of 3500 square meters and is a professional manufacturer of small and medium size electric motors, equipped with advanced facilities, advanced production and perfect testing equipments. We are the excellent medium-small size motor manufacturer in China, aiming to provide the highest quality but lowest price to our clients.Our FactoryNow, We have a integrated team of high skilled technicians and professional salesmen with advanced product-development method and modernized management system. In order to manufacture high quality products, we make sure we take strict procedure controls, from “material select”, “machining”, “producing”. “assembling”, and “testing”, on each single part. All of our products are produced by national standard and reach the high level in China. Products is hot sale not only in domestic market also oversea regions such as South-East Asia, Middle Asia etc. Motors are quite welcomed and we received thousands good comments from customers.Our ProductThe main business of the company specially produces the cast-iron electric motor such as Y/Y2/IE2 general motor, YEJ break motor, YVF frequency controlled motor, YD multi-speed motor, YC/YCL/YL single phase motor, YTY pump motor, YLJ break motor etc and alluminum motor such as MS general motor, ML/MC single phase motor as well as brushed DC motor and brushed permanent magnet DC motor.
Similar Product Recommend